Nissan Terrano model r20 series 2004. Instruction — part 335
Part
Side air bag is activated
SRS is NOT activated
Seat with built-in side air
bag
REPLACE all parts of
front seatback (including
front seatback frame)
1. Visually check the seat on the collision side.
2. Remove the seat on the collision side and check the following for damage
and deformities.
I
Harness, connectors and terminals
I
Frame and recliner (for front and rear seat), and also adjuster and slides
(for front seat)
3. If no damage is found, reinstall the seat.
4. If damaged—REPLACE the damaged seat parts with new bolts.
Center pillar inner
1. Check the center pillar inner on the collision side for damage (dents, cracks, deformation).
2. If damaged—REPAIR the center pillar inner.
Trim
1. Check for visible signs of damage (dents, cracks, deformation) of the interior trim on the collision side.
2. If damaged—REPLACE the damaged trim parts.
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
Collision Diagnosis (Cont’d)
RS-62
BODY & TRIM
CONTENTS
. . . . . . . . . . . . . . . ...2
Service Notice. . . . . . . . . . . . . . . ..2
Supplemental Restraint System (SRS)
. . . ...2
. . . . . . . . . . . . . 3
Description . . . . . . . . . . . . . . . . ...3
. . . . . . .5
Checking Body Corrosion. . . . . . . . . . . 5
. . . . . . . . . . . . . . .6
Removal and Installation . . . . . . . . . . . .6
. . . . . . . . ..8
Removal and Installation . . . . . . . . . . . .8
. . . . . . . . . . . . . . . . . . . .10
Removal and Installation . . . . . . . . . . ...10
. . . . . . . ..16
Removal and Installation . . . . . . . . . . ...16
. . . . . . . . . . . ..18
Removal and Installation . . . . . . . . . . ...18
. . . . . . . . . . . . . . . . ...19
Removal and Installation . . . . . . . . . . ...19
. . . . . . . . . . . . . . . . ...20
Removal and Installation . . . . . . . . . . ...20
. . . . . . . . . . . . . . . . . .21
Removal and Installation . . . . . . . . . . ...21
. . . . . . . . . . . . . . . . .34
Removal and Installation . . . . . . . . . . ...34
Heated Seat. . . . . . . . . . . . . . . ...36
Active Head Restraint. . . . . . . . . . . . 36
. . . . . . . . . . . . . . . ..37
Removal and Installation . . . . . . . . . . ...37
. . . . . . . . . . . . . . . . ..39
Removal and Installation . . . . . . . . . . ...39
. . . . . . . . . . . . . . . . . ..40
Removal and Installation . . . . . . . . . . ...40
. . . . . . . . . 42
Removal and Installation . . . . . . . . . . ...42
. . . . . . . . . . . . . . . .48
Removal and Installation . . . . . . . . . . ...48
. . . . . . . . . . . . . 49
Alignment . . . . . . . . . . . . . . . . ...49
Service Notice
I
When removing or installing various parts, place a cloth or padding onto the vehicle body to prevent
scratches.
I
Handle trim, molding, instruments, grille, etc. carefully during removing or installing. Be careful not to oil
or damage them.
I
Apply sealing compound where necessary when installing parts.
I
When applying sealing compound, be careful that the sealing compound does not protrude from parts.
I
When replacing any metal parts (for example body outer panel, members, etc.), be sure to take rust pre-
vention measures.
Supplemental Restraint System (SRS) “AIR
BAG” and “SEAT BELT PRE-TENSIONER”
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER” used along with
a seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of
collision. The SRS system composition which is available to NISSAN MODEL R20 is as follows (The compo-
sition varies according to the destination and optional equipment.):
I
For a frontal collision
The Supplemental Restraint System consists of driver air bag module (located in the center of the steer-
ing wheel), front passenger air bag module (located on the instrument panel on passenger side), front seat
belt pre-tensioners, a diagnosis sensor unit, warning lamp, wiring harness and spiral cable.
I
For a side collision
The Supplemental Restraint System consists of front side air bag module (located in the outer side of front
seat), side air bag (satellite) sensor, diagnosis sensor unit (one of components of air bags for a frontal
collision), wiring harness, warning lamp (one of components of air bags for a frontal collision).
Information necessary to service the system safely is included in the RS section of this Service Instruction.
WARNING:
I
To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance should be per-
formed by an authorized NISSAN dealer.
I
Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the RS section.
I
Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Instruction. Spiral cable and wiring harnesses covered with yellow insulation tape either just
before the harness connectors or for the complete harness are related to the SRS.
PRECAUTIONS
BT-2
Description
I
Clips and fasteners in BT section correspond to the following numbers and symbols.
I
Replace any clips and/or fasteners which are damaged during removal or installation.
Symbol No.
Shapes
Removal & Installation
C101
SBF302H
SBF367BA
C102
YBT081
SBF115B
C106
SBF090B
SBF091B
C201
SBF241B
SBF242B
C203
SBF258G
SBF708E
CLIP AND FASTENER
BT-3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст