Nissan Terrano model r20 series 2004. Instruction — part 290
Components
NRA026
REAR AXLE
RA-6
Removal
I
Disconnect parking brake cable and brake tube.
I
Remove nuts securing wheel bearing cage with baffle plate.
I
Remove ABS sensor.
I
Draw out axle shaft with Tool.
When drawing out axle shaft, be careful not to damage oil seal.
I
Remove oil seal.
Do not reuse oil seal one it is removed.
Always install new one.
I
Remove ABS-rotor using special tool.
I
Unbend lock washer with a screwdriver.
Do not reuse lock washer once it is removed.
Always install new one.
ERA013
NRA025
YRA004
NRA024
SRA104
REAR AXLE
RA-7
I
Remove bearing lock nut with Tool.
I
Remove rear axle shaft using special tool.
I
Remove grease seal in bearing cage with suitable bar.
I
Remove wheel bearing outer race.
Suitable tool is included in Rear Axle Removal/Installation kit
NI-104.
Inspection
AXLE SHAFT
I
Check axle shaft for straightness, cracks, damage, wear or
distortion. Replace if necessary.
BEARING HOUSING
I
Check bearing housing for deformation or cracks. Replace if
necessary.
REAR AXLE HOUSING
I
Check rear axle housing for yield, deformation or cracks.
Replace if necessary.
YRA005
NRA023
SRA015
SRA287A
REAR AXLE
Removal (Cont’d)
RA-8
Installation
I
Press new wheel bearing until it touches the bottom of the
bearing housing.
Always press outer race of wheel bearing during installation.
I
Press new grease seal until it bottoms end face of bearing
housing.
After installing new grease seal, coat sealing lip with multipur-
pose grease.
I
Install baffle plate over bearing housing and press axle shaft
into inner race of wheel bearing.
Be careful not to damage or deform grease seal.
I
Install washer and lock washer.
I
Before installing lock nut, apply a coat of wheel bearing grease
to its seat. Tighten lock nut to specified torque.
: 245 - 249 N
⋅
m
(25 - 30 kg-m, 181 - 217 ft-lb)
I
Turn bearing housing (with respect to axle shaft) two or three
times. It must turn smoothly.
SRA288A
SRA289A
SRA290A
YRA005
ERA016
REAR AXLE
RA-9
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст