Nissan Murano Z51. Instruction — part 1305
FRONT SIDE AIR BAG MODULE
SR-45
< REMOVAL AND INSTALLATION >
[FOR MEXICO]
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
FRONT SIDE AIR BAG MODULE
Exploded View
INFOID:0000000005518928
Removal and Installation
INFOID:0000000005518929
REMOVAL
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3
minutes.
• Always work from the rear of the front side air bag module.
• Never use the air tools or electric tools for servicing.
1.
Remove the front seat. Refer to
SE-112, "Removal and Installation"
.
2.
Remove the seatback board. Refer to
.
3.
Remove the front side air bag module fixing nuts, and/or harness connector.
4.
Remove the front side air bag module.
CAUTION:
• Always place the front side air bag module with pad side fac-
ing upward.
• Never impact the front side air bag module.
1.
Seatback flame
2.
Seat cushion flame
3.
Front side air bag module
A.
Front side air bag harness connector
Refer to
JMHIA0514GB
: Upward
JMHIA0274ZZ
SR-46
< REMOVAL AND INSTALLATION >
[FOR MEXICO]
FRONT SIDE AIR BAG MODULE
• Replace the front side air bag module if it has been dropped
or sustained an impact.
• Never insert any foreign objects (screwdriver, etc.) into front side air bag module.
• Never disassemble the front side air bag module.
• Never expose the front side air bag module to temperatures exceeding 90
°
C (194
°
F).
• Never allow oil, grease, detergent, or water to come in contact with the front side air bag module.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Never use the old fixing nuts after removal, replace with the new nuts.
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT-III. Refer to
• After the work is completed, check that no malfunctioning system is detected by air bag warning
lamp.
JMHIA0009ZZ
SIDE CURTAIN AIR BAG MODULE
SR-47
< REMOVAL AND INSTALLATION >
[FOR MEXICO]
C
D
E
F
G
I
J
K
L
M
A
B
SR
N
O
P
SIDE CURTAIN AIR BAG MODULE
Exploded View
INFOID:0000000005518930
Removal and Installation
INFOID:0000000005518931
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes
or more.
• Never use air tools or electric tools for servicing.
REMOVAL
1.
Remove the headlining.
• Normal roof models: Refer to
INT-27, "NORMAL ROOF : Removal and Installation"
.
• Sunroof models: Refer to
INT-30, "SUNROOF : Removal and Installation"
2.
Remove the side curtain air bag harness connector.
CAUTION:
• For installing/removing the side curtain air bag harness
connector, insert thin screwdriver wrapped in tape into
notch, lift lock and remove the connector.
• Install the connector with lock raised, and push lock into
the connector.
• After installing the connector, check that the lock is
pushed securely into it.
3.
Remove the fixing bolts, and then remove the side curtain air bag module.
CAUTION:
1.
Side curtain air bag inflator
2.
Side curtain air bag
3.
Strap
A.
Side curtain air bag harness connec-
tor
B.
Ground bolt
Refer to
JMHIA0513GB
PHIA0953J
SR-48
< REMOVAL AND INSTALLATION >
[FOR MEXICO]
SIDE CURTAIN AIR BAG MODULE
• Never impact the side curtain air bag module.
• Replace the side curtain air bag module if it has been dropped
or sustained an impact.
• Never insert any foreign objects (screwdriver, etc.) into the side curtain air bag module.
• Never disassemble the side curtain air bag module.
• Never expose the side curtain air bag module to temperatures exceeding 90
°
C (194
°
F).
• Never allow oil, grease, detergent, or water to come in contact with the side curtain air bag module.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunc-
tioning parts, reset the memory using self-diagnosis or CONSULT-III. Refer to
• After the work is completed, check that no system malfunction is detected by air bag warning lamp.
JMHIA0009ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст