Nissan Murano Z51. Instruction — part 8
ADP-24
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
MEMORY FUNCTION : Component Parts Location
INFOID:0000000005515283
1.
BCM M118, M119, M122, M123
2.
Automatic drive positioner control unit
M75, M104
3.
Combination meter
4.
Tilt & telescopic switch M102
5.
Key slot M99
6.
Seat memory switch D13
7.
Door mirror remote control switch
D14
8.
Front door switch (driver side) B34
9.
Tilt motor M116
JMJIA1409ZZ
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-25
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
MEMORY FUNCTION : Component Description
INFOID:0000000005515284
CONTROL UNITS
INPUT PARTS
Switches
Sensors
OUTPUT PARTS
EXIT ASSIST FUNCTION
10. Telescopic motor M117
11.
Door mirror (driver side) D3
12. Reclining motor B461
13. Sliding, Lifting switch
(Power seat switch B459)
14. Reclining switch
(Power seat switch B459)
15. Driver seat control unit B451,B452
16. Sliding motor B461
17. Lifting motor (front) B455
18. Lifting motor (rear) B456
A.
Behind the combination meter
B.
View with instrument driver lower
panel removed
C.
View with instrument driver lower
panel removed
D.
View with seat cushion and seatback
pad removed
E.
Backside of the seat cushion
Item
Function
Driver seat control unit
• The address of each part is recorded.
• Operates each motor of seat to the registered position.
• Requests the operations of steering column and door mirror to automatic drive
positioner control unit
Automatic drive positioner control unit
Operates the steering column and door mirror with the instructions from the driver
seat control.
Item
Function
Memory switch 1/2
The registration and memory function can be performed with its operation.
Item
Function
Door mirror sensor
(driver side/passenger side)
Detect the up/down and left/right position of outside mirror face.
Tilt & telescopic sensor
Detect the up/down and left/right position of steering column.
Lifting sensor (front)
Detect the up/down position of seat lifting (front).
Lifting sensor (rear)
Detect the up/down position of seat lifting (rear).
Reclining sensor
Detect the tilt of seatback.
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Door mirror motor
(driver side/passenger side)
Move the outside mirror face upward/downward and leftward/rightward.
Tilt and telescopic motor
Move the steering column upward/downward and frontward/rearward.
Lifting motor (front)
Move the seat lifter (front) upward/downward.
Lifting motor (rear)
Move the seat lifter (rear) upward/downward.
Reclining motor
Tilt and raise up the seatback.
Sliding motor
Slide the seat frontward/rearward.
Memory indicator
Illuminates or blinks according to the registration/operation status.
ADP-26
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
EXIT ASSIST FUNCTION : System Diagram
INFOID:0000000005515285
EXIT ASSIST FUNCTION : System Description
INFOID:0000000005515286
OUTLINE
When exiting, the condition is satisfied, the seat is moved backward 40 mm (1.57 in) from normal sitting posi-
tion and the steering is moved to the most upper position.
The seat slide amount and the steering operation at entry/exit operation can be changed.
NOTE:
• This function is set to ON before delivery (initial setting).
• Further information for the system setting procedure. Refer to
ADP-9, "SYSTEM INITIALIZATION : Descrip-
OPERATION PROCEDURE
1.
Open the driver door with ignition switch in OFF position.(Intelligent Key is not inserted into key slot)
2.
Driver seat and steering column will move to the exiting position.
OPERATION CONDITION
Satisfy all of the following items. The exit assist function is not performed if these items are not satisfied.
JMJIA1462GB
Item
Request status
Ignition position
OFF
System setting [Entry/exit assist function (seat/steering)]
ON
Initialization
Done
Key switch
OFF
(Intelligent Key is not inserted into key slot)
Switch inputs
• Power seat switch
• Tilt & telescopic switch
• Door mirror remote control switch
• Set switch
• Memory switch
OFF
(Not operated)
A/T selector lever
P position
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-27
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
DETAIL FLOW
Order
Input
Output
Control unit condition
1
Door switch
(Driver side)
—
Driver seat control unit receives door switch signal (driver side/
open) from BCM via CAN communication.
2
—
Motors
(Seat sliding, tilt)
Driver seat control unit operates the seat sliding motor, which recog-
nizes that the driver side door is opened with ignition switch OFF.
Driver seat control unit then requests the operations of tilt motor to
auto drive positioner control unit via UART communication. The au-
tomatic drive positioner control unit operates each motor for a con-
stant amount.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст