Nissan Murano Z51. Instruction — part 1523
WT-30
< DTC/CIRCUIT DIAGNOSIS >
C1716, C1717, C1718, C1719 TRANSMITTER
C1716, C1717, C1718, C1719 TRANSMITTER
DTC Logic
INFOID:0000000005575990
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
DTC REPRODUCTION PROCEDURE
With CONSULT-III
1.
Turn the ignition switch ON.
CAUTION:
Never start the engine.
2.
Check the tire pressure for all wheels and adjust to the specified value. Refer to
.
3.
Perform “SELF-DIAG RESULTS” in “AIR PRESSURE MONITOR” of “BCM”.
Is DTC “C1716”, “C1717”, “C1718”, “C1719” detected?
YES
>> Perform trouble diagnosis. Refer to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000005575991
1.
CHECK TIRE PRESSURE
Check the internal pressure of all wheels. Refer to
.
Is the inspection result normal?
YES
>> Replace the DTC-detected malfunctioning transmitter. Refer to
.
NO
>> After adjusting the tire pressure, GO TO 2.
2.
CHECK TIRE PRESSURE SIGNAL
With CONSULT-III
1.
Check and adjust the tire pressure for all wheels. Refer to
.
2.
Perform transmitter ID registration for all wheels. Refer to
WT-22, "ID REGISTRATION PROCEDURE :
3.
Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes.
4.
Perform “DATA MONITOR” in “AIR PRESSURE MONITOR” of “BCM”.
5.
Select “BCM” in “DATA MONITOR”, and check that the tire pressures match the standard value.
CAUTION:
Stop the vehicle and within 15 minutes, use CONSULT-III “DATA MONITOR” to display the tire
pressure for all wheels.
6.
Check that “DATA MONITOR” displays tire pressure of 438.60 kPa (4.47 kg/cm
2
, 63.60 Psi).
Is the inspection 438.60 kPa (4.47 kg/cm
2
, 63.60 Psi)?
YES
>> Replace transmitter the tire pressure 438.60 kPa (4.386 bar, 4.47 kg/cm
2
, 63.60 Psi) displayed.
.
NO
>> GO TO 1.
DTC
Display item
Malfunction detected condition
Possible case
C1716
[PRESSDATA ERR] FL
Malfunction in the tire pressure data from the front left
wheel transmitter.
• ID registration is not fin-
ished
• Transmitter malfunction
C1717
[PRESSDATA ERR] FR
Malfunction in the tire pressure data from the front right
wheel transmitter.
C1718
[PRESSDATA ERR] RR
Malfunction in the tire pressure data from the rear right
wheel transmitter.
C1719
[PRESSDATA ERR] RL
Malfunction in the tire pressure data from the rear left
wheel transmitter.
C1716, C1717, C1718, C1719 TRANSMITTER
WT-31
< DTC/CIRCUIT DIAGNOSIS >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
Special Repair Requirement
INFOID:0000000005575992
1.
CHECK TIRE PRESSURE
Check all tires for tire pressures. Refer to
.
Does all tire pressure data meet the specification?
YES
>> GO TO 2.
NO
>> Inspect or repair the tires or wheels and adjust the tire pressure to the specification.
2.
PERFORM ID REGISTRATION
Perform ID registration. Refer to
WT-22, "ID REGISTRATION PROCEDURE : Special Repair Requirement"
>> END
WT-32
< DTC/CIRCUIT DIAGNOSIS >
C1729 VEHICLE SPEED SIGNAL
C1729 VEHICLE SPEED SIGNAL
Description
INFOID:0000000005575993
BCM detects no vehicle speed signal.
DTC Logic
INFOID:0000000005575994
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
DTC REPRODUCTION PROCEDURE
With CONSULT-III
1.
Drive for several minutes at a speed of 40 km/h (25 MPH) or more, then stop the vehicle.
2.
Perform “SELF-DIAG RESULTS” in “AIR PRESSURE MONITOR” of “BCM”.
Is DTC “C1729” detected?
YES
>> Perform trouble diagnosis. Refer to
NO
>> INSPECTION END
Diagnosis Procedure
INFOID:0000000005575995
1.
PERFORM UNIFIED METER AND A/C AMP. SELF-DIAGNOSIS
With CONSULT-III
Perform “SELF-DIAG RESULTS” of “METER/M&A”.
Is any DTC detected?
YES
>> Check the DTC. Refer to
.
NO
>> GO TO 2.
2.
PERFORM SELF-DIAGNOSIS
With CONSULT-III
Perform “SELF-DIAG RESULTS” in “AIR PRESSURE MONITOR” of “BCM”.
Is DTC “C1729” detected?
YES
>> Replace BCM. Refer to
WT-11, "COMMON ITEM : CONSULT-III Function (BCM - COMMON
NO
>> GO TO 3.
3.
CHECK INFORMATION
With CONSULT-III
1.
Perform “DATA MONITOR” in “AIR PRESSURE MONITOR” of “BCM”.
2.
Select “BCM” in “DATA MONITOR”, and check the input/output values. Refer to
Is the inspection result normal?
YES
>> Check pin terminal and connection of each harness connector for malfunctioning conditions.
NO
>> Replace BCM. Refer to
Special Repair Requirement
INFOID:0000000005575996
1.
CHECK TIRE PRESSURE
Check all tires for tire pressures. Refer to
.
Does all tire pressure data meet the specification?
DTC
number
Trouble diagnosis name
DTC detecting condition
Possible case
C1729
VHCL SPEED SIG ERR
Vehicle speed signal not detected.
• CAN communication error
• Unified meter and A/C amp. mal-
function
C1729 VEHICLE SPEED SIGNAL
WT-33
< DTC/CIRCUIT DIAGNOSIS >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
YES
>> GO TO 2.
NO
>> Inspect or repair the tires or wheels and adjust the tire pressure to the specification.
2.
PERFORM ID REGISTRATION
Perform ID registration. Refer to
WT-22, "ID REGISTRATION PROCEDURE : Special Repair Requirement"
>> END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст