Nissan Murano Z51. Instruction — part 939
INT-26
< REMOVAL AND INSTALLATION >
HEADLINING
HEADLINING
NORMAL ROOF
NORMAL ROOF : Exploded View
INFOID:0000000005513295
1.
Sun-visor assembly (LH/RH)
2.
Sun-visor holder (LH/RH)
3.
Sun-visor cover (LH/RH)
4.
Roof harness
5.
Assist grip cap
6.
Assist grip
7.
Personal lamp assembly
8.
Headlining clip
9.
Rear DVD harness
10. Center seat belt retractor cov-
er
11. Headlining assembly
12. Roof plate assembly
13. Antenna feeder harness
14. Roof console assembly
15. Dual-lock fastener
16. Roof insulator
17. Map lamp bracket
18. Roof bracket
19. Roof console
20. Map lamp assembly
21. Map lamp lens
: Clip
: Pawl
: Metal clip
: Vehicle front
JMJIA2692ZZ
HEADLINING
INT-27
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
NORMAL ROOF : Removal and Installation
INFOID:0000000005513296
REMOVAL
1.
Remove front seat belt anchor bolt (LH/RH). Refer to
SB-9, "SEAT BELT BUCKLE : Exploded View"
2.
Remove rear seat belt anchor bolt (LH/RH). Refer to
SB-14, "SEAT BELT BUCKLE : Exploded View"
3.
Remove luggage side lower finisher (LH/RH), luggage side upper finisher (LH/RH). Refer to
4.
Remove front pillar garnish (LH/RH), front kicking plate (LH/RH), center pillar lower garnish (LH/RH), cen-
ter pillar upper garnish (LH/RH), front body side welt (LH/RH), rear body side welt (LH/RH) and rear kick-
ing plate (LH/RH). Refer to
INT-20, "Removal and Installation"
5.
Disconnect roof harness (1) connectors (A), the antenna feeder (2) harness connector (C) and the clips
(B).
6.
Disengage the rear display unit fixing clips with a remover tool, disconnect the harness connector and
then remove the rear display unit. Refer to
AV-536, "Removal and Installation"
.
7.
Remove sun-visor (LH/RH).
• Remove sun-visor cover.
• Remove mounting screws.
• Disconnect vanity mirror lamp harness connector (With vanity mirror lamp)
8.
Disconnect inside mirror and rain sensor harness connector. Refer to
.
9.
Rotate 90 degrees and remove sun-visor holder (1) (LH/RH).
10. With flat-bladed screwdriver (A), press the upper side mounting
plastic clip (1) and pull up to remove the mounting plastic clip (1)
from assist grip (2).
•
L: Left side of vehicle
R: Right side of vehicle
JMJIA2760ZZ
JMJIA0098GB
JMJIA2790ZZ
INT-28
< REMOVAL AND INSTALLATION >
HEADLINING
11. Once the mounting plastic clip (1) is removed, pull out the assist
grip (2) to remove.
12. Recline front seat back to facilitate the headlining removal.
13. Pull map lamp assembly toward and disengage metal clips (B)
and dual-lock fastener (A).
CAUTION:
Map lamp assembly is crimped from the back of headlining.
Remove it by disengaging the crimped area of back of map
lamp assembly after removing headlining from the vehicle.
14. Disengage center seat belt retractor cover(1) fixing clips and
metal clip with remover tool (A), then remove rear center seat
belt cover.
15. Disconnect the antenna feeder harness connectors (A), (B), the roof harness connector (C) and clips (D).
16. Using remover tool, remove headlining clip at the back side of headlining.
JMJIA1380ZZ
JMJIA1008ZZ
: Clip
: Metal clip
JMJIA2759ZZ
(1): Right side of vehicle
(2): Left side of vehicle
JMJIA2729ZZ
HEADLINING
INT-29
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
17. Remove headlining (1) from back door.
CAUTION:
• When removing the headlining, 2 workers are required.
• Never bend headlining when removing.
• Be careful not to scratch or damage any part of the body
while taking out the headlining.
18. Remove the following parts after removing headlining.
• Map lamp assembly. Refer to
INL-121, "Removal and Installation"
• Personal lamp. Refer to
INL-128, "Removal and Installation"
.
• Roof harness assembly.
• Antenna feeder harness assembly. Refer to the following.
- Base audio. Refer to
- BOSE audio without navigation (Radio): Refer to
.
- BOSE audio without navigation (Satellite radio): Refer to
.
- BOSE audio without navigation (TEL): Refer to
- BOSE audio with navigation (Radio): Refer to
.
- BOSE audio with navigation (Satellite radio): Refer to
.
- BOSE audio with navigation (GPS): Refer to
.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• As for guide, install first sun-visor holder (LH/RH) and then the rear headlining clips at the back side
of headlining.
• Be careful not to bend the headlining when installing.
SUNROOF
JMJIA1010ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст