Nissan Murano Z51. Instruction — part 1233
SE-120
< REMOVAL AND INSTALLATION >
REAR SEAT
REAR SEAT
Exploded View
INFOID:0000000005518237
REAR SEAT (LH SIDE)
1.
Headrest (LH)
2.
Headrest holder (locked)
3.
Headrest holder (free)
4.
Seatback trim
5.
Seatback pad
6.
Reclining device inner cover (out-
side)
7.
Reclining device inner cover (inside) 8.
Seat cushion trim
9.
Seat cushion hinge cover
10. Seat cushion link cover
11.
Seat cushion pad and frame
12. Seat cushion link bush
13. Reclining device outer cover
14. Reclining cover
15. Rear seat harness (LH)
JMJIA1466GB
REAR SEAT
SE-121
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
REAR SEAT (RH SIDE)
16. Reclining device assembly
17. Seatback control cable
18. Seatback control lever escutcheon
19. Seatback frame
20. Seatback board
21. Seatback board clip
22. Seatback silencer
Refer to
for symbols in the figure.
1.
Headrest (RH)
2.
Headrest (center)
3.
Headrest holder (locked)
4.
Headrest holder (free)
5.
Seatback trim
6.
Seatback pad
7.
Armrest inner cover
8.
Cup holder
9.
Armrest
10. Armrest bush
11.
Armrest outer cover
12. Seat cushion trim
13. Seat cushion hinge cover
14. Seat cushion link cover
15. Seat cushion pad and frame
JMJIA1465GB
SE-122
< REMOVAL AND INSTALLATION >
REAR SEAT
Removal and Installation
INFOID:0000000005518238
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the seat mounting bolts and nuts.
• Pull up the luggage floor finisher front (1).
• Remove the seat mounting bolt (A) and nut (B).
2.
Disconnect the rear seat harness connector (A) and heater unit harness connector (B). (Power return seat
and heater seat model only)
a.
LH side
b.
RH side
3.
Remove the reclining cover.
16. Seat cushion link bush
17. Reclining device inner cover (out-
side)
18. Reclining device inner cover (inside)
19. Reclining device assembly
20. Reclining device outer cover
21. Reclining cover
22. Rear seat harness (RH)
23. Seatback board
24. Seatback board clip
25. Seatback frame
26. Dynamic dumper
27. Seatback control lever escutcheon
28. Seatback control cable
29. Seatback silencer
Refer to
for symbols in the figure.
JMJIA1476ZZ
JMJIA1477ZZ
JMJIA1478ZZ
REAR SEAT
SE-123
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
4.
Remove the seatback control cable (1) from reclining device
assembly and seat mounting bolt (A).
5.
Remove the seat cushion hinge cover.
6.
Remove the rear seat mounting bolts (A).
7.
Pull up the seat cushion and remove the seat mounting bolt (A).
8.
Remove the rear seat assembly from back door.
INSTALLATION
NOTE:
Tighten rear seat mouniting bolts and nuts following the numerical order shown in the figure.
1.
Install the rear seat mounting bolt on behind the seatback (out
side) and nut on behind the seatback (inside).
2.
Install the rear seat mounting bolt on the seat cushion out side.
3.
Connect the rear seat harness connector and heater harness connector. (Power return seat and heater
seat only)
JMJIA1479ZZ
JMJIA1480ZZ
JMJIA1481ZZ
JMJIA1683ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст