Nissan Terrano r20e. Instruction — part 10
6. Touch “DATA MONITOR”.
7. Touch “MAIN SIGNALS” to set recording condition.
8. See “Numerical Display”, “Barchart Display” or “Line Graph Dis-
play”.
9. Touch “START”.
10. When performing cruise test, touch “Store Data”.
11. After finishing cruise test part 1, touch “STOP”.
12. Touch “STORE”.
SAT252K
SAT253K
SAT236K
SAT237K
SAT254K
TROUBLE DIAGNOSIS — Basic Inspection
Road Test (Cont’d)
AT-37
13. Touch “DISPLAY”.
14. Touch “PRINT”.
15. Check the monitor data printed out.
16. Continue cruise test part 2 and 3.
Without CONSULT-II
I
Throttle (accelerator) position can be checked by voltage
across terminals
q
34
and
q
35
of TCM.
SAT608J
SAT238K
NAT235
TROUBLE DIAGNOSIS — Basic Inspection
Road Test (Cont’d)
AT-38
CRUISE TEST — Part 1
Drive vehicle for approx. 10 minutes to
warm engine oil and ATF up to operating
temperature.
ATF operating temperature:
50 - 80°C (122 - 176°F)
1. Park vehicle on flat surface.
2. Set overdrive control switch to “ON”
position.
3. Move selector lever to “P” position.
4. Start engine.
Move selector lever to “D” position.
Accelerate vehicle by constantly depress-
ing accelerator pedal halfway.
Does vehicle start from D
1
?
Read gear position.
Yes
E
No
Go to “11. Vehicle Cannot
Be Started From D
1
”,
Does A/T shift from D
1
to D
2
at the speci-
fied speed?
Read gear position, throttle open-
ing and vehicle speed.
Specified speed when shifting from
D
1
to D
2
:
Refer to Shift schedule, AT-196.
Yes
E
No
Go to “12. A/T Does Not
Shift: D
1
,
D
2
Or Does
Not Kickdown: D
4
,
D
2
”,
Does A/T shift from D
2
to D
3
at the speci-
fied speed?
Read gear position, throttle posi-
tion and vehicle speed.
Specified speed when shifting from
D
2
to D
3
:
Refer to Shift schedule, AT-104.
Yes
E
No
Go to “13. A/T Does Not
Shift: D
2
,
D
3
”, AT-104.
q
A
(Go to next page.)
SAT774B
SAT775B
SAT495G
SAT401H
H
H
H
H
H
H
H
TROUBLE DIAGNOSIS — Basic Inspection
Road Test (Cont’d)
AT-39
q
A
Does A/T shift from D
3
to D
4
at the speci-
fied speed?
Read gear position, throttle posi-
tion and vehicle speed.
Specified speed when shifting from
D
3
to D
4
:
Refer to Shift schedule, AT-196.
Yes
E
No
Go to “14. A/T Does Not
Shift: D
3
,
D
4
”, AT-105.
Does A/T perform lock-up at the specified
speed?
Read vehicle speed, throttle posi-
tion when lock-up duty becomes
94%.
Specified speed when lock-up
occurs:
Refer to Shift schedule, AT-196.
Yes
E
No
Go to “15. A/T Does Not
Perform Lock-up”, AT-106.
Does A/T hold lock-up condition for more
than 30 seconds?
Yes
E
No
Go to “16. A/T Does Not
Hold Lock-up Condition”,
AT-107.
1. Release accelerator pedal.
2. Is lock-up released when accelerator
pedal is released?
Yes
E
No
Go to “17. Lock-up Is Not
Released”, AT-107.
1. Decelerate vehicle by applying foot
brake lightly.
2. Does engine speed return to idle
smoothly when A/T is shifted from D
4
to
D
3
?
Read gear position and engine
speed.
Yes
E
No
Go to “18. Engine Speed
Does Not Return To Idle
(Light Braking D
4
,
D
3
)”,
1. Stop vehicle.
2. Go to “Cruise test — Part 2”, AT-41.
SAT402H
SAT403H
H
H
H
H
H
H
TROUBLE DIAGNOSIS — Basic Inspection
Road Test (Cont’d)
AT-40
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст