Nissan Primera P11. Instruction — part 56
5-DOOR HATCHBACK
●
Back door adjustment: Adjust at hinge-body portion for proper back door fit.
●
Back door lock system adjustment: Adjust lock & striker so that they are in the center. After adjustment,
check back door lock operation.
WARNING:
●
Be careful not to scratch back door stay when installing back door. A scratched stay may cause
gas leakage.
●
The contents of the back door stay are under pressure. Do not take apart, puncture, apply heat
or allow fire near it.
●
Opener cable: Do not attempt to bend cable using excessive force.
●
After installation, make sure that back door and fuel filler lid open smoothly.
REMOVAL — Rear bumper assembly
p
1
Remove license plate lamp
p
2
Remove clips
C203
securing left and right chipping protector.
p
3
Remove screws securing bumper fascia to left and right rear fenders.
p
4
Remove clips
CS101
securing bumper fascia to rear panel.
p
5
Remove clips
C205
securing bumper fascia to rear panel upper.
p
6
Extract bumper fascia assembly.
NBT036
Opener handle
Opener cable
Lock nut
Fuel filler lid opener & control
20.6 - 26.5
(2.10 - 2.70,
15.2 - 19.5)
12.7 - 15.7
(1.30 - 1.60,
9.4 - 11.6)
12.7 - 15.7
(1.30 - 1.60,
9.4 - 11.6)
12.7 - 15.7
(1.30 - 1.60,
9.4 - 11.6)
20.6 - 26.5
(2.10 - 2.70,
15.2 - 19.5)
: N·m (kg-m, ft-lb)
Cloth
.
5.1 - 6.37
(0.52 - 0.65, 45.1 - 56.4)
Actuator
Key
cylinder
BODY END
Body Rear End and Opener (Cont’d)
BT-9
YBT061
BODY END
Body Rear End and Opener (Cont’d)
BT-10
WAGON
●
Back door adjustment: Adjust at hinge-body portion for proper back door fit.
●
Back door lock system adjustment: Adjust lock & striker so that they are in the center. After adjustment,
check back door lock operation.
WARNING:
●
Be careful not to scratch back door stay when installing back door. A scratched stay may cause
gas leakage.
●
The contents of the back door stay are under pressure. Do not take apart, puncture, apply heat
or allow fire near it.
●
Fuel filler lid opener cable: Do not attempt to bend cable using excessive force.
●
After installation, make sure that back door and fuel filler lid open smoothly.
REMOVAL — Rear bumper assembly
p
1
Remove clips
C203
securing left and right chipping protector.
p
2
Remove screws securing bumper fascia to left and right rear fenders.
p
3
Remove clips
C205
(small) securing bumper fascia to rear panel.
p
4
Remove clips
C205
(large) securing bumper fascia to rear panel upper.
p
5
Extract bumper fascia assembly.
NBF270
Opener handle
Opener
cable
Lock nut
.
Fuel filler lid opener & control
.
20.6 - 26.5
(2.10 - 2.70,
15.2 - 19.5)
12.7 - 15.7
(1.30 - 1.60,
9.4 - 11.6)
12.7 - 15.7
(1.30 - 1.60,
9.4 - 11.6)
12.7 - 15.7
(1.30 - 1.60,
9.4 - 11.6)
.
12.7 - 15.7
(1.30 - 1.60,
9.4 - 11.6)
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
2.9 - 3.8 N·m
(0.30 - 0.39 kg-m,
25.7 - 33.6 in-lb)
.
.
5.1 - 6.37
(0.52 - 0.65,
45.1 - 56.4)
Key cylinder
Actuator
BODY END
Body Rear End and Opener (Cont’d)
BT-11
NBF271
Back door lock adjustment
Back door hinge adjustment
Back door stay installation
Opener
handle
Fuel filler lid control
Back door striker adjustment
*
: Bumper assembly mounting clips and screws.
Bumper fascia
assembly
Rear fender cover
Back door lock control
BODY END
Body Rear End and Opener (Cont’d)
BT-12
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст