Nissan Frontier D22. Instruction — part 894
RSU-10
LEAF SPRING
LEAF SPRING
PFP:55020
Removal
EES000XJ
1.
Disconnect shock absorber lower end, and remove U-bolts.
Support axle with jack stand prior to removing leaf spring.
2.
Remove the spring shackle.
3.
Remove the front pin.
4.
Remove the leaf spring.
Inspection
EES000XK
●
Check leaf spring for cracks. Replace if necessary.
●
Check front bracket and pin, shackle, U-bolts and spring pad for
wear, cracks, straightness and damaged threads. Replace if
necessary.
●
Check all bushings for deformation and cracks. Replace if nec-
essary.
(4WD models: Rear spring front bushing)
Make sure that front bushing is properly installed.
SRA702
SRA704
ASU034
ASU035
LEAF SPRING
RSU-11
C
D
F
G
H
I
J
K
L
M
A
B
RSU
Installation
EES000XL
1.
Apply soapsuds to rubber bushing.
2.
Install spring shackle and front pin, and finger tighten the nuts.
3.
Install spring pad and nuts under leaf spring or axle case.
4.
Tighten U-bolt mounting nuts diagonally.
Tighten U-bolts so that the lengths of all U-bolts under
spring pad are the same.
5.
Install shock absorber, and finger tighten the nuts.
6.
Remove stands and bounce the vehicle to stabilize suspension.
(Unladen)
7.
Tighten spring shackle nuts, front pin nuts and shock absorber
nuts.
When installing rubber parts, final tightening must be car-
ried out under unladen condition* with tires on the ground.
* Fuel, radiator coolant and engine oil full. Spare tire, jack,
hand tools and mats in designated positions.
Refer to
.
SRA727
SRA703
Refer to
.
SRA754
RSU-12
STABILIZER BAR
STABILIZER BAR
PFP:54611
Removal
EES000XM
Remove stabilizer bar connecting bolts and clamp bolts.
Inspection
EES000XN
●
Check stabilizer bar for twist and deformation.
●
Check rubber bushing for cracks, wear and deterioration.
Replace if necessary.
Installation
EES000XO
Install in the reverse order of removal.
Refer to
SERVICE DATA AND SPECIFICATIONS (SDS)
RSU-13
C
D
F
G
H
I
J
K
L
M
A
B
RSU
SERVICE DATA AND SPECIFICATIONS (SDS)
PFP:00030
General Specifications (Rear)
EES000XP
Suspension type
Rigid axle with semi-elliptic leaf spring
Shock absorber type
Double-acting hydraulic
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст