Nissan Rogue. Instruction — part 938
PARKING BRAKE SHOE
PB-13
< REMOVAL AND INSTALLATION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
b. Using suitable tool, rotate adjuster (1) in direction (B) to retract
and loosen parking brake shoe.
5. Remove anti-rattle pins, springs, and return springs.
CAUTION:
Do not drop the removed parts.
6. Remove brake strut, adjuster, parking brake shoes and toggle
lever.
CAUTION:
• The leading parking brake shoes are made of different
materials than the trailing parking brake shoes. Do not
misidentify them when removing.
• Do not drop the removed parts.
7. Remove the back plate. Refer to
RAX-7, "Removal and Installation"
(AWD).
8. Inspect the components. Refer to
.
INSTALLATION
Installation is in the reverse order of the removal.
• Apply PBC (Poly Butyl Cuprysil) grease or silicone-based grease to the back plate and brake shoe.
CAUTION:
The leading parking brake shoes are made of different materials than the trailing parking brake
shoes. Do not misidentify them when installing.
• Assemble adjusters so that threaded part is expanded when rotat-
ing it in the direction shown by arrow.
• Shorten adjuster by rotating it.
• When assembling, apply PBC (Poly Butyl Cuprysil) grease or sili-
cone-based grease to threads.
• Check parking brake shoe lining surface and drum inner surface
for grease. Wipe off any grease on the surfaces.
• Inspect the parking brake system. Adjust the parking brake system if necessary. Refer to
Inspection
INFOID:0000000011280112
INSPECTION AFTER REMOVAL
Brake Lining Thickness Inspection
• Check thickness (A) of brake lining.
Drum Inner Diameter Inspection
JPFIB0015ZZ
A: For RH brake
B: For LH brake
: Vehicle front
: Adjuster expands
JPFIB0016ZZ
Limit (A)
: Refer to
.
SBR021A
PB-14
< REMOVAL AND INSTALLATION >
PARKING BRAKE SHOE
• Check inner diameter (B) of drum using suitable tool.
Other Inspections
• Check brake lining for excessive wear, damage, and peeling. Replace if necessary.
• Check parking brake shoe for excessive wear and damage. Replace if necessary.
• Check anti-rattle pin for excessive wear, damage and rust. Replace if necessary.
• Check adjuster spring, anti-rattle spring and return springs for settling, excessive wear, damage, and rust.
Replace if necessary.
• Check brake strut for excessive wear, damage and rust. Replace if necessary.
• Check toggle lever for excessive wear, damage and rust. Replace if necessary.
• Visually check inside of the drum for rust, cracks, damage or excessive wear with a suitable tool. Replace if
necessary.
Limit (B)
: Refer to
JPFIB0008ZZ
SERVICE DATA AND SPECIFICATIONS (SDS)
PB-15
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Parking Drum Brake
INFOID:0000000011280113
Unit: mm (in)
Parking Brake Control
INFOID:0000000011280114
Item
Limit
Brake lining
Thickness
3.2 (0.126)
Wear thickness
1.5 (0.059)
Drum
Inner diameter
172 (6.77)
Wear limit of inner diameter
173 (6.81)
VIN
Item
Standard
USA Production
Number of notches [under force of 196 N (20.0 kg-f, 44.1 lb-f)]
4 – 5 notches
Number of notches when brake warning lamp turns ON
1 notch
Korea Production
Number of notches [under force of 196 N (20.0 kg-f, 44.1 lb-f)]
6 – 7 notches
Number of notches when brake warning lamp turns ON
1 notch
PCS
PCS-1
ELECTRICAL & POWER CONTROL
C
D
E
F
G
H
I
J
K
L
B
SECTION
PCS
A
O
P
N
CONTENTS
POWER CONTROL SYSTEM
IPDM E/R
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
Precaution for Work . . . . . . . . . . . . ..
PREPARATION . . . . . . . . . . .
PREPARATION . . . . . . . . . . . . ...
Special Service Tool . . . . . . . . . . . .....
SYSTEM DESCRIPTION . . . . . . . ..
COMPONENT PARTS . . . . . . . . . .
Component Parts Location . . . . . . . . . ....
SYSTEM . . . . . . . . . . . . . . . ..
RELAY CONTROL SYSTEM . . . . . . . . . ..
RELAY CONTROL SYSTEM : System Descrip-
tion . . . . . . . . . . . . . . . . . . ....
RELAY CONTROL SYSTEM : Fail-safe . . . . ...
SMART FIELD-EFFECT TRANSISTOR (FET) . . ...
SMART FIELD-EFFECT TRANSISTOR (FET) :
System Description . . . . . . . . . . . . ...
POWER CONSUMPTION CONTROL SYSTEM . .....
POWER CONSUMPTION CONTROL SYSTEM :
System Description . . . . . . . . . . . . ...
DIAGNOSIS SYSTEM (IPDM E/R) . . . . . .
CONSULT Function (IPDM E/R) . . . . . . . .
ECU DIAGNOSIS INFORMATION . . . ..
IPDM E/R (INTELLIGENT POWER DISTRI-
BUTION MODULE ENGINE ROOM) . . . . .
Reference Value . . . . . . . . . . . . . .
Fail-safe . . . . . . . . . . . . . . . . ...
DTC Index . . . . . . . . . . . . . . . ...
WIRING DIAGRAM . . . . . . . . . ..
IPDM E/R (INTELLIGENT POWER DISTRI-
BUTION MODULE ENGINE ROOM) . . . .
Wiring Diagram . . . . . . . . . . . . . .
BASIC INSPECTION . . . . . . . . ...
ADDITIONAL SERVICE WHEN REPLACING
IPDM E/R . . . . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . . ...
Work Procedure . . . . . . . . . . . . . ...
CONFIGURATION (IPDM E/R) . . . . . . .
Description . . . . . . . . . . . . . . . ...
Work Procedure . . . . . . . . . . . . . ...
Configuration list . . . . . . . . . . . . . ..
DTC/CIRCUIT DIAGNOSIS . . . . . . .
U1000 CAN COMM CIRCUIT . . . . . . ...
Description . . . . . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
B120E IPDM E/R . . . . . . . . . . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
B20DD IGNITION RELAY ON CIRCUIT . . ...
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
B20DE IGNITION RELAY OFF CIRCUIT . . .
DTC Logic . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . ...
POWER SUPPLY AND GROUND CIRCUIT .
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст