Nissan Rogue. Instruction — part 267

DAS

C1BB7-00 CONTROL MODULE

DAS-239

< DTC/CIRCUIT DIAGNOSIS >

[CHASSIS CONTROL]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

C1BB7-00 CONTROL MODULE

DTC Description

INFOID:0000000011277402

DTC DETECTION LOGIC

POSSIBLE CAUSE

• Chassis control module

FAIL-SAFE

The following functions are suspended:

• Active Trace Control function

• Active Ride Control function

• Active Engine Brake function

DTC CONFIRMATION PROCEDURE

1.

PRECONDITIONING

If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF

and wait at least 10 seconds before conducting the next test.

>> GO TO 2.

2.

CHECK DTC DETECTION

With CONSULT

1. Turn the ignition switch OFF to ON.

CAUTION:

Be sure to wait of 10 seconds after turning ignition switch OFF or ON.

2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BB7-00” detected?

YES

>> Proceed to

DAS-239, "Diagnosis Procedure"

.

NO-1 >> To check malfunction symptom before repair: Refer to

GI-44, "Intermittent Incident"

.

NO-2 >> Confirmation after repair: Inspection End.

Diagnosis Procedure

INFOID:0000000011277403

1.

PERFORM SELF-DIAGNOSIS

With CONSULT

1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.

2. Turn the ignition switch OFF and wait for 10 seconds or more.

3. Turn the ignition switch ON.

4. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BB7-00” detected?

YES

>> Replace the chassis control module. Refer to

DAS-286, "Removal and Installation"

.

NO

>> Inspection End.

DTC

Display Item

(Trouble diagnosis content)

Malfunction detected condition

C1BB7-00

CONTROL MODULE
(Control module)

When a malfunction is detected in chassis control module.

DAS-240

< DTC/CIRCUIT DIAGNOSIS >

[CHASSIS CONTROL]

C1BB8-00 CONTROL MODULE

C1BB8-00 CONTROL MODULE

DTC Description

INFOID:0000000011277404

DTC DETECTION LOGIC

POSSIBLE CAUSE

• Chassis control module

FAIL-SAFE

The following functions are suspended:

• Active Trace Control function

• Active Ride Control function

• Active Engine Brake function

DTC CONFIRMATION PROCEDURE

1.

PRECONDITIONING

If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF

and wait at least 10 seconds before conducting the next test.

>> GO TO 2.

2.

CHECK DTC DETECTION

With CONSULT

1. Turn the ignition switch OFF to ON.

CAUTION:

Be sure to wait of 10 seconds after turning ignition switch OFF or ON.

2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BB8-00” detected?

YES

>> Proceed to

DAS-240, "Diagnosis Procedure"

.

NO-1 >> To check malfunction symptom before repair: Refer to

GI-44, "Intermittent Incident"

.

NO-2 >> Confirmation after repair: Inspection End.

Diagnosis Procedure

INFOID:0000000011277405

1.

PERFORM SELF-DIAGNOSIS

With CONSULT

1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.

2. Turn the ignition switch OFF and wait for 10 seconds or more.

3. Turn the ignition switch ON.

4. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BB8-00” detected?

YES

>> Replace the chassis control module. Refer to

DAS-286, "Removal and Installation"

.

NO

>> Inspection End.

DTC

Display Item

(Trouble diagnosis content)

Malfunction detected condition

C1BB8-00

CONTROL MODULE
(Control module)

When a malfunction is detected in chassis control module.

DAS

C1BB9-00 CONTROL MODULE

DAS-241

< DTC/CIRCUIT DIAGNOSIS >

[CHASSIS CONTROL]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

C1BB9-00 CONTROL MODULE

DTC Description

INFOID:0000000011277406

DTC DETECTION LOGIC

POSSIBLE CAUSE

• Chassis control module

FAIL-SAFE

The following functions are suspended:

• Active Trace Control function

• Active Ride Control function

• Active Engine Brake function

DTC CONFIRMATION PROCEDURE

1.

PRECONDITIONING

If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF

and wait at least 10 seconds before conducting the next test.

>> GO TO 2.

2.

CHECK DTC DETECTION

With CONSULT

1. Turn the ignition switch OFF to ON.

CAUTION:

Be sure to wait of 10 seconds after turning ignition switch OFF or ON.

2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BB9-00” detected?

YES

>> Proceed to

DAS-241, "Diagnosis Procedure"

.

NO-1 >> To check malfunction symptom before repair: Refer to

GI-44, "Intermittent Incident"

.

NO-2 >> Confirmation after repair: Inspection End.

Diagnosis Procedure

INFOID:0000000011277407

1.

PERFORM SELF-DIAGNOSIS

With CONSULT

1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.

2. Turn the ignition switch OFF and wait for 10 seconds or more.

3. Turn the ignition switch ON.

4. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BB9-00” detected?

YES

>> Replace the chassis control module. Refer to

DAS-286, "Removal and Installation"

.

NO

>> Inspection End.

DTC

Display Item

(Trouble diagnosis content)

Malfunction detected condition

C1BB9-00

CONTROL MODULE
(Control module)

When a malfunction is detected in chassis control module.

DAS-242

< DTC/CIRCUIT DIAGNOSIS >

[CHASSIS CONTROL]

C1BBA-00 CONTROL MODULE

C1BBA-00 CONTROL MODULE

DTC Description

INFOID:0000000011277408

DTC DETECTION LOGIC

POSSIBLE CAUSE

• Chassis control module

FAIL-SAFE

The following functions are suspended:

• Active Trace Control function

• Active Ride Control function

• Active Engine Brake function

DTC CONFIRMATION PROCEDURE

1.

PRECONDITIONING

If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF

and wait at least 10 seconds before conducting the next test.

>> GO TO 2.

2.

CHECK DTC DETECTION

With CONSULT

1. Turn the ignition switch OFF to ON.

CAUTION:

Be sure to wait of 10 seconds after turning ignition switch OFF or ON.

2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BBA-00” detected?

YES

>> Proceed to

DAS-242, "Diagnosis Procedure"

.

NO-1 >> To check malfunction symptom before repair: Refer to

GI-44, "Intermittent Incident"

.

NO-2 >> Confirmation after repair: Inspection End.

Diagnosis Procedure

INFOID:0000000011277409

1.

PERFORM SELF-DIAGNOSIS

With CONSULT

1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.

2. Turn the ignition switch OFF and wait for 10 seconds or more.

3. Turn the ignition switch ON.

4. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BBA-00” detected?

YES

>> Replace the chassis control module. Refer to

DAS-286, "Removal and Installation"

.

NO

>> Inspection End.

DTC

Display Item

(Trouble diagnosis content)

Malfunction detected condition

C1BBA-00

CONTROL MODULE
(Control module)

When a malfunction is detected in chassis control module.