Nissan Rogue. Instruction — part 268
DAS
C1BBB-00 CONTROL MODULE
DAS-243
< DTC/CIRCUIT DIAGNOSIS >
[CHASSIS CONTROL]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
C1BBB-00 CONTROL MODULE
DTC Description
INFOID:0000000011277410
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Chassis control module
FAIL-SAFE
The following functions are suspended:
• Active Trace Control function
• Active Ride Control function
• Active Engine Brake function
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF
and wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
With CONSULT
1. Turn the ignition switch OFF to ON.
CAUTION:
Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BBB-00” detected?
YES
>> Proceed to
DAS-243, "Diagnosis Procedure"
NO-1 >> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
NO-2 >> Confirmation after repair: Inspection End.
Diagnosis Procedure
INFOID:0000000011277411
1.
PERFORM SELF-DIAGNOSIS
With CONSULT
1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.
2. Turn the ignition switch OFF and wait for 10 seconds or more.
3. Turn the ignition switch ON.
4. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BBB-00” detected?
YES
>> Replace the chassis control module. Refer to
DAS-286, "Removal and Installation"
.
NO
>> Inspection End.
DTC
Display Item
(Trouble diagnosis content)
Malfunction detected condition
C1BBB-00
CONTROL MODULE
(Control module)
When a malfunction is detected in chassis control module.
DAS-244
< DTC/CIRCUIT DIAGNOSIS >
[CHASSIS CONTROL]
C1BBC-00 CONTROL MODULE
C1BBC-00 CONTROL MODULE
DTC Description
INFOID:0000000011277412
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Chassis control module
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF
and wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
With CONSULT
1. Turn the ignition switch OFF to ON.
CAUTION:
Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BBC-00” detected?
YES
>> Proceed to
DAS-244, "Diagnosis Procedure"
NO-1 >> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
.
NO-2 >> Confirmation after repair: Inspection End.
Diagnosis Procedure
INFOID:0000000011277413
1.
PERFORM SELF-DIAGNOSIS
With CONSULT
1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.
2. Turn the ignition switch OFF and wait for 10 seconds or more.
3. Turn the ignition switch ON.
4. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BBC-00” detected?
YES
>> Replace the chassis control module. Refer to
DAS-286, "Removal and Installation"
.
NO
>> Inspection End.
DTC
Display Item
(Trouble diagnosis content)
Malfunction detected condition
C1BBC-00
CONTROL MODULE
(Control module)
When a malfunction is detected in chassis control module.
DAS
C1BBD-00 VARIANT CODING
DAS-245
< DTC/CIRCUIT DIAGNOSIS >
[CHASSIS CONTROL]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
C1BBD-00 VARIANT CODING
DTC Description
INFOID:0000000011277414
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Chassis control module
FAIL-SAFE
The following functions are suspended:
• Active Trace Control function
• Active Ride Control function
• Active Engine Brake function
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF
and wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
With CONSULT
1. Turn the ignition switch OFF to ON.
CAUTION:
Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BBD-00” detected?
YES
>> Proceed to
DAS-245, "Diagnosis Procedure"
NO-1 >> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
NO-2 >> Confirmation after repair: Inspection End.
Diagnosis Procedure
INFOID:0000000011277415
1.
PERFORM SELF-DIAGNOSIS
With CONSULT
1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.
2. Turn the ignition switch OFF and wait for 10 seconds or more.
3. Turn the ignition switch ON.
4. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BBD-00” detected?
YES
>> Perform configuration. Refer to
NO
>> Inspection End.
DTC
Display Item
(Trouble diagnosis content)
Malfunction detected condition
C1BBD-00
VARIANT CODING
(Variant coding)
When variant coding is incomplete.
DAS-246
< DTC/CIRCUIT DIAGNOSIS >
[CHASSIS CONTROL]
C1BC0-00 FRONT RIGHT WHEEL SENSOR
C1BC0-00 FRONT RIGHT WHEEL SENSOR
DTC Description
INFOID:0000000011277416
DTC DETECTION LOGIC
POSSIBLE CAUSE
• Front right wheel sensor
• Front right sensor rotor
• ABS actuator and electric unit (control unit)
• Chassis control module
FAIL-SAFE
The following functions are suspended:
• Active Trace Control function
• Active Ride Control function
DTC CONFIRMATION PROCEDURE
1.
PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF
and wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.
CHECK DTC DETECTION
With CONSULT
1. Start the engine.
2. Drive the vehicle at approx. 30 km/h (19 MPH) or more for approx. 1 minute.
3. Stop the vehicle.
4. Turn the ignition switch OFF to ON.
CAUTION:
Be sure to wait of 10 seconds after turning ignition switch OFF or ON.
5. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BC0-00” detected?
YES
>> Proceed to
DAS-246, "Diagnosis Procedure"
NO-1 >> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
.
NO-2 >> Confirmation after repair: Inspection End.
Diagnosis Procedure
INFOID:0000000011277417
1.
CHECK FRONT RH WHEEL SENSOR SYSTEM
With CONSULT
Perform “Self Diagnostic Result” of “ABS”.
Is DTC detected?
YES
>> Check the DTC. Refer to
.
NO
>> GO TO 2.
2.
PERFORM SELF-DIAGNOSIS
With CONSULT
1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.
2. Turn the ignition switch OFF and wait for 10 seconds or more.
3. Turn the ignition switch ON.
DTC
Display Item
(Trouble diagnosis content)
Malfunction detected condition
C1BC0-00
FR WHEEL SENSOR
(Front right wheel sensor)
When a malfunction is detected in front right wheel sensor system.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст