Nissan Rogue. Instruction — part 214
DAS
SYSTEM
DAS-27
< SYSTEM DESCRIPTION >
[DRIVER ASSISTANCE SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
• The MOD system can detect moving objects on either side out
approximately 10 feet (3 m).
OPERATION DESCRIPTION
• Around view monitor control unit enables Moving Object Detection system.
• AV control unit turns ON the Moving Object Detection (MOD) indicator on the AV control unit display.
• Around view monitor control unit starts the control as follows, based on a moving object detection signal.
Operation Condition
• MOD indicator: ON
• Warning systems indicator: ON
• When the vehicle is moving in R (reverse) at 5 MPH (8 km/h) or less.
• When the MOD system setting on the combination meter is ON.
NOTE:
MOD system ON/OFF can be set on the combination meter.
• Moving Object Detection braking will not operate or will stop operating and only a warning chime will sound
under the following conditions:
- When driving with a tire that is not within normal tire conditions (pressure, wear, chain, spare, etc).
- When the vehicle is equipped with non-original brake parts or suspension parts.
• Do not use the MOD system when towing a trailer.
• Excessive noise such as the audio system will interfere with the chime sound, and it may not be heard.
FCW
ALOIA0164ZZ
DAS-28
< SYSTEM DESCRIPTION >
[DRIVER ASSISTANCE SYSTEM]
SYSTEM
FCW : System Description
INFOID:0000000011277179
SYSTEM DIAGRAM
AROUND VIEW MONITOR CONTROL UNIT INPUT/OUTPUT SIGNAL ITEM
Input Signal Item
AWOIA0068GB
DAS
SYSTEM
DAS-29
< SYSTEM DESCRIPTION >
[DRIVER ASSISTANCE SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
Output Signal Item
DESCRIPTION
• The Forward Collision Warning (FCW) System alerts the driver by a warning lamp (vehicle ahead detection
indicator) and chime when own vehicle is getting close to the vehicle ahead in the traveling lane.
• The FCW system will function when own vehicle is driven at speeds of approximately 10 MPH (15 km/h) and
above.
FUNCTION DESCRIPTION
The distance from the vehicle ahead and a relative speed are calculated by using the distance sensor signal
transmitted to the combination meter via CAN communication. When judging the necessity of warning from
the received distance sensor signal, the distance sensor transmits a buzzer signal and warning signal to the
combination meter via CAN communication.
FCW Operating Condition
• Warning system switch: ON
• Vehicle speed: Approximately 10 MPH (15 km/h) and above.
Transmit unit
Signal name
Description
ABS actuator and elec-
tric unit (control unit)
CAN communication Wheel speed signal
Receives wheel speed.
Combination meter
CAN communication System selection signal
Receives a selection state each item in “Driver Aids” se-
lected with the steering switch.
Distance sensor
CAN communication Distance sensor signal
Receives detection results, such as the presence or ab-
sence of a leading vehicle and distance from the vehicle.
Warning system switch
Warning system switch signal
Receives an ON/OFF state of the warning system switch.
Reception unit
Signal name
Description
Combination
meter
CAN commu-
nication
Meter display
signal
Vehicle ahead detec-
tion indicator signal
Transmits a signal to display a state of the system on
the information display.
Buzzer signal
Transmits a output signal to activate the buzzer.
Distance sen-
sor
CAN commu-
nication
Vehicle speed signal
Transmits a vehicle speed calculated by the distance
sensor.
DAS-30
< SYSTEM DESCRIPTION >
[DRIVER ASSISTANCE SYSTEM]
OPERATION
OPERATION
BSW
BSW : Switch Name and Function
INFOID:0000000011277180
BSW : System Display and Warning
INFOID:0000000011277181
INDICATOR AND WARNING LAMP
DISPLAY AND WARNING OPERATION
ALOIA0109ZZ
No.
Name
Function
1.
Warning systems switch
Turns BSW system ON/OFF (when the BSW system is enabled on the combination meter informa-
tion display).
AWOIA0087ZZ
No.
Name
Description
1.
Warning systems ON indicator
Indicates that the LDW system is ON.
2.
Blind Spot Warning lamp (orange)
• Turns ON when Blind Spot Warning system is malfunctioning.
• Blinks during the following conditions:
- DTC is detected or system is temporarily disabled.
- When rear view camera blockage is detected.
Vehicle condition/Driver's operation
Action
Warning
systems ON
indicator
Vehicle speed
(Approx.)
[km/h (MPH)]
Turn signal
condition
Status of ve-
hicle detec-
tion within
detection
area
Indication on the
Blind Spot Warning indicator
Buzzer
OFF
—
—
—
OFF
OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст