Nissan Rogue. Instruction — part 386
DLK-386
< REMOVAL AND INSTALLATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
FRONT DOOR LOCK
3. Remove front door vapor barrier (1).
NOTE:
LH side shown; RH similar.
4. Remove door side grommet (1), and remove bolt from grommet
hole (2).
5. Separate door key cylinder rod (LH only) (1) from door key cylin-
der assembly (LH only) (2).
6. While pulling (1) outside handle, remove (2) door key cylinder
assembly (LH side) or outside handle escutcheon (RH side).
ALKIA3488ZZ
JMKIA5888ZZ
ALKIA2487ZZ
ALKIA2487ZZ
JMKIA0560ZZ
2015 Rogue NAM
FRONT DOOR LOCK
DLK-387
< REMOVAL AND INSTALLATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
7. While pulling outside handle (1), slide toward rear of vehicle to
remove outside handle.
8. Remove front gasket and rear gasket.
9. Slide outside handle bracket toward rear of vehicle to remove.
10. Disconnect outside handle cable (1) from outside handle bracket
(2) as shown.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• When installing door key cylinder rod (LH only), be sure to rotate door key cylinder rod holder until a
click is felt.
• After installation, check door lock cable is properly engaged to outside handle bracket.
• After installation, check door open/close and lock/unlock operation.
AWKIA1997ZZ
JMKIA2652ZZ
ALKIA2489ZZ
2015 Rogue NAM
DLK-388
< REMOVAL AND INSTALLATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
REAR DOOR LOCK
REAR DOOR LOCK
Exploded View
INFOID:0000000011279174
DOOR LOCK
DOOR LOCK : Removal and Installation
INFOID:0000000011279175
REMOVAL
1. Remove rear door finisher. Refer to
INT-18, "Removal and Installation"
.
2. Remove vapor barrier.
3. Remove rear door lock bolts.
4. Disconnect the door lock cables.
5. Disconnect the harness connector from the rear door lock and remove.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse rear door lock bolts.
• Tighten bolts to specification. Refer to
• After installation, check door lock cables are properly engaged to inside handle and outside handle.
• After installation, check door open/close and lock/unlock operation.
INSIDE HANDLE
INSIDE HANDLE : Removal and Installation
INFOID:0000000011279176
REMOVAL
1.
Outside handle
2.
Outside handle escutcheon
3.
Rear gasket
4.
Rear door lock
5.
Cable clip
6.
Outside handle bracket
7.
Front gasket
8.
Inside handle
Front
AWKIA3225ZZ
2015 Rogue NAM
REAR DOOR LOCK
DLK-389
< REMOVAL AND INSTALLATION >
[WITHOUT INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
1. Remove rear door finisher. Refer to
INT-18, "Removal and Installation"
.
2. Remove inside handle bolt (A).
3. Disconnect door lock cables from inside handle and remove.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• After installation, check door lock cables are properly engaged to inside handle.
• After installation, check door open/close and lock/unlock operation.
OUTSIDE HANDLE
OUTSIDE HANDLE : Removal and Installation
INFOID:0000000011279177
REMOVAL
1. Fully close rear door glass.
2. Remove rear door finisher. Refer to
INT-18, "Removal and Installation"
.
3. Remove rear door vapor barrier (1).
NOTE:
LH side shown; RH similar.
4. Remove door side grommet and bolt from grommet hole.
ALKIA3499ZZ
ALKIA3481ZZ
JMKIA0025ZZ
2015 Rogue NAM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст