Nissan Rogue. Instruction — part 947
PCS-34
< BASIC INSPECTION >
[IPDM E/R]
CONFIGURATION (IPDM E/R)
HLL (HEAD LIGHT LEVELING) (IF EQUIPPED)
SETTING ITEM
NOTE
Items
Setting value
SEAT
3-ROW SEAT
⇔ 2-ROW SEAT
• 3-ROW SEAT: With 3rd row seating
• 2-ROW SEAT: Without 3rd row seating
PCS
U1000 CAN COMM CIRCUIT
PCS-35
< DTC/CIRCUIT DIAGNOSIS >
[IPDM E/R]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
DTC/CIRCUIT DIAGNOSIS
U1000 CAN COMM CIRCUIT
Description
INFOID:0000000011277086
.
DTC Logic
INFOID:0000000011277087
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000011277088
1.
PERFORM SELF DIAGNOSTIC RESULT
1. Turn ignition switch ON and wait for 2 second or more.
2. Check “Self Diagnostic Result” of “IPDM E/R”.
Is “CAN COMM CIRCUIT” displayed?
YES
>> Refer to
LAN-17, "Trouble Diagnosis Flow Chart"
NO
>> Refer to
GI-44, "Intermittent Incident"
.
CONSULT Display
DTC Detection Condition
Possible Cause
CAN COMM CIRCUIT
[U1000]
When IPDM E/R cannot communicate with CAN com-
munication signal continuously for 2 seconds or more.
In CAN communication system, any item (or items) of
the following listed below is malfunctioning:
• Transmission
• Receiving (ECM)
• Receiving (BCM)
• Receiving (Combination meter)
PCS-36
< DTC/CIRCUIT DIAGNOSIS >
[IPDM E/R]
B120E IPDM E/R
B120E IPDM E/R
DTC Logic
INFOID:0000000011277089
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION
1. Turn ignition switch ON.
2. Turn ignition switch OFF and wait 1 second or more.
3. Turn ignition switch ON.
4. Perform “Self Diagnostic Result” of “IPDM E/R” using CONSULT.
Is DTC B120E displayed?
YES
>> Refer to
.
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011277090
1.
PERFORM SELF DIAGNOSTIC RESULT
Perform “Self Diagnostic Result” of “IPDM E/R” using CONSULT.
Is display history of DTC B120E CRNT?
YES
>> Replace IPDM E/R. Refer to
PCS-40, "Removal and Installation"
NO
>> Refer to
GI-44, "Intermittent Incident"
.
CONSULT Display
DTC Detection Condition
Possible Cause
USM ECU Not configured
[B120E]
The IPDM E/R detects 0V for greater than 2 sec-
onds. ECU internal failure.
IPDM E/R
PCS
B20DD IGNITION RELAY ON CIRCUIT
PCS-37
< DTC/CIRCUIT DIAGNOSIS >
[IPDM E/R]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
B20DD IGNITION RELAY ON CIRCUIT
DTC Logic
INFOID:0000000011277091
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION
1. Turn ignition switch ON.
2. Turn ignition switch OFF and wait 1 second or more.
3. Turn ignition switch ON.
4. Perform “Self Diagnostic Result” of “IPDM E/R” using CONSULT.
Is DTC B20DD displayed?
YES
>> Refer to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011277092
1.
PERFORM SELF DIAGNOSTIC RESULT
Perform “Self Diagnostic Result” of “IPDM E/R” using CONSULT.
Is display history of DTC B20DD CRNT?
YES
>> Replace IPDM E/R. Refer to
PCS-40, "Removal and Installation"
.
NO
>> Refer to
GI-44, "Intermittent Incident"
.
CONSULT Display
DTC Detection Condition
Possible Cause
IGN RELAY ON
[B20DD]
The ignition relay ON is detected for 1 second at
ignition switch OFF (CPU monitors the status at
the contact and excitation coil circuits of the igni-
tion relay inside it).
IPDM E/R
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст