Nissan Rogue. Instruction — part 253
DAS
COMPONENT PARTS
DAS-183
< SYSTEM DESCRIPTION >
[CHASSIS CONTROL]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000011277355
ALOIA0234ZZ
Front of vehicle
A
Instrument panel LH
B
View with glove box assembly re-
moved
C
Rear of engine compartment RH
D
Front of engine compartment LH
E
Rear of battery
No.
Component parts
Function
1.
Steering angle sensor
2.
Data link connector
LAN-26, "CAN COMMUNICATION SYSTEM : System Description"
3.
Combination meter
DAS-184
< SYSTEM DESCRIPTION >
[CHASSIS CONTROL]
COMPONENT PARTS
Chassis Control Module
INFOID:0000000011277356
Chassis control module controls the following systems based on the
signals from each sensor, switch, and control unit:
• Active engine brake
• Active ride control
• Active trace control
4.
Vehicle information display
MWI-15, "INFORMATION DISPLAY : System Description"
5.
Chassis control module
DAS-184, "Chassis Control Module"
6.
ABS actuator and electric unit (control unit)
7.
Engine control module
EC-31, "ENGINE CONTROL SYSTEM : System Description"
8.
Transmission control module
TM-31, "CVT CONTROL SYSTEM : System Description"
No.
Component parts
Function
ALOIA0206ZZ
DAS
SYSTEM
DAS-185
< SYSTEM DESCRIPTION >
[CHASSIS CONTROL]
C
D
E
F
G
H
I
J
K
L
M
B
N
P
A
SYSTEM
System Description - Chassis Control
INFOID:0000000011277357
• Chassis control to integrally control the driving system was adopted.
• Chassis control module inputs the necessary information for control from CAN communication and each
switch and integrally controls each system. Refer to the following table for systems controlled and input/out-
put signals.
SYSTEM DIAGRAM
System Description - Active Engine Brake
INFOID:0000000011277358
Active Engine Brake function can be switched ON/OFF through the "Chassis Control" settings on the vehicle
information display.
• Assist at corners - to lessen the workload of adjusting speed with
brake pedal operations at corners. Active Engine Brake function
adds small amount of deceleration by controlling the CVT gear
ratio depending on the steering input and various sensors. This
benefits to easier traceability at corners.
System
Reference page
Active Engine Brake
DAS-185, "System Description - Active Engine Brake"
Active Ride Control
DAS-186, "System Description - Active Ride Control"
Active Trace Control
DAS-186, "System Description - Active Trace Control"
ALOIA0207GB
ALOIA0208GB
DAS-186
< SYSTEM DESCRIPTION >
[CHASSIS CONTROL]
SYSTEM
• Assist at breaking - To enhance braking feel, Active Engine Brake
adds deceleration by shifting the CVT gear ratio to lower side
depending on the driver’s brake pedal operation.
System Description - Active Ride Control
INFOID:0000000011277359
The Active Ride Control function can be turned ON/OFF by turning the VDC OFF switch ON/OFF.
• Engine control - Enhances ride comfort by adding/subtracting
engine torque in an effort to control the front and rear wheel load
balance.
• Engine control - Enhances handling by adding/subtracting engine
torque in an effort to control the front and rear wheel load balance.
• Brake control - Enhances ride comfort by restraining upper body
movement with small amount of brake control when driving on
bumpy roads.
System Description - Active Trace Control
INFOID:0000000011277360
Active Trace Control function controls the braking utilizing the ABS actuator and electric unit (control unit),
depending on cornering condition calculated from driver’s steering input and plural sensors. Active Trace Con-
trol function is aimed to enhance traceability at corners and smooth the vehicle movement to provide confident
driving.
ALOIA0209GB
ALOIA0210GB
ALOIA0211GB
ALOIA0212GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст