Nissan Rogue. Instruction — part 1241
WT-40
< DTC/CIRCUIT DIAGNOSIS >
C1730, C1731, C1732, C1733 FLAT TIRE
3.
CHECK TIRE PRESSURE SIGNAL
With CONSULT
1. Adjust tire pressure for all wheels to the specified value. Refer to
.
2. Select “Data Monitor” in “AIR PRESSURE MONITOR”.
3. Check that the air pressures match the specified value.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Repair or replace malfunctioning components.
Monitor item
Displayed value
AIR PRESS FL
Approximately equal to value indicated on tire gauge for front LH tire
AIR PRESS FR
Approximately equal to value indicated on tire gauge for front RH tire
AIR PRESS RR
Approximately equal to value indicated on tire gauge for rear RH tire
AIR PRESS RL
Approximately equal to value indicated on tire gauge for rear LH tire
C1734 BCM
WT-41
< DTC/CIRCUIT DIAGNOSIS >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
C1734 BCM
DTC Logic
INFOID:0000000011280514
NOTE:
The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions. Refer to the Signal Tech
II User Guide for additional information.
• Activate and display TPMS sensor IDs
• Display tire pressure reported by the TPMS sensor
• Read TPMS DTCs
• Register TPMS sensor IDs
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PERFORM SELF DIAGNOSTIC RESULT
With CONSULT
Perform “Self Diagnostic Result”.
Is DTC C1734 detected?
YES
>> Proceed to
.
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011280515
NOTE:
The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions. Refer to the Signal Tech
II User Guide for additional information.
• Activate and display TPMS sensor IDs
• Display tire pressure reported by the TPMS sensor
• Read TPMS DTCs
• Register TPMS sensor IDs
Regarding Wiring Diagram information, refer to
.
1.
CHECK BCM HARNESS CONNECTORS
Check BCM harness connectors for damage or loose connections.
Is the inspection result normal?
YES
>> Repair or replace connectors.
NO
>> GO TO 2.
2.
CHECK BCM POWER SUPPLY AND GROUND
Check BCM power supply and ground. Refer to
(with Intelligent Key system)
BCS-128, "Diagnosis Procedure"
(without Intelligent Key system).
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness or connectors.
3.
CHECK BCM INPUT/OUTPUT SIGNALS
Check BCM input/output signals. Refer to
(with Intelligent Key system) or
(without Intelligent Key system).
Is the inspection result normal?
YES
>> Inspection End.
DTC
Display Item
Malfunction Detected Condition
Possible Cause
C1734
CONTROL UNIT
TPMS malfunction in BCM.
BCM
WT-42
< DTC/CIRCUIT DIAGNOSIS >
C1734 BCM
NO
>> Replace BCM. Refer to
BCS-75, "Removal and Installation"
(with Intelligent Key system) or
135, "Removal and Installation"
(without Intelligent Key system).
C1735 IGNITION SIGNAL
WT-43
< DTC/CIRCUIT DIAGNOSIS >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
C1735 IGNITION SIGNAL
DTC Logic
INFOID:0000000011280516
NOTE:
The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions. Refer to the Signal Tech
II User Guide for additional information.
• Activate and display TPMS sensor IDs
• Display tire pressure reported by the TPMS sensor
• Read TPMS DTCs
• Register TPMS sensor IDs
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PERFORM SELF DIAGNOSTIC RESULT
With CONSULT
Perform “Self Diagnostic Result”.
Is DTC C1735 detected?
YES
>> Proceed to
.
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000011280517
NOTE:
The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions. Refer to the Signal Tech
II User Guide for additional information.
• Activate and display TPMS sensor IDs
• Display tire pressure reported by the TPMS sensor
• Read TPMS DTCs
• Register TPMS sensor IDs
1.
PERFORM BCM SELF-DIAGNOSIS
When DTC “C1735-00” is detected, perform BCM diagnosis.
>> Perform BCM diagnosis. Refer to
(with Intelligent Key system) or
(without Intelligent Key system).
DTC
Display Item
Malfunction Detected Condition
Possible Cause
C1735
IGNITION SIGNAL LINE - BCM/
TPMS
BCM has detected a mismatch between
IGN ON signals.
BCM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст