Nissan Rogue. Instruction — part 675
ROOF RACK
EXT-45
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
ROOF RACK
Exploded View
INFOID:0000000011280056
Removal and Installation
INFOID:0000000011280057
REMOVAL
1. Release pawls and remove roof rack front and rear cover (1)
using suitable tool (A).
: Pawl
2. Remove bolts and remove roof rack.
INSTALLATION
Installation is in the reverse order of removal.
1. Roof rack rear bolt cover
2. Roof rack front bolt cover
3. Roof rack
4. Roof side molding
5. Back door hinge cover
Metal Clip
Pawl
ALKIA3361ZZ
ALKIA3389ZZ
EXT-46
< REMOVAL AND INSTALLATION >
DOOR OUTSIDE LOWER MOLDING
DOOR OUTSIDE LOWER MOLDING
Exploded View
INFOID:0000000011280058
Removal and Installation
INFOID:0000000011280059
FRONT DOOR OUTSIDE LOWER MOLDING
Removal
1. Using a suitable tool (A) release clips from front door outside
lower molding (1) starting at the rear and working forward.
CAUTION:
• Release the clips slowly and carefully.
• Do not pull the front door outside lower molding.
2. Remove the front door outside lower molding.
Installation
Installation is in the reverse order of removal.
1.
Rear door outside lower molding
2.
Front door outside lower molding
Clip
Front
ALKIA3365ZZ
ALKIA3366ZZ
DOOR OUTSIDE LOWER MOLDING
EXT-47
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
CAUTION:
• Do not reuse double-sided tape, always replace with new tape.
• When installing, visually check the front door outside lower molding and clips, replace with new
clips if they have been damaged.
• When installing front door outside lower molding, make sure clips are attached to the molding. Make
sure old clips have all been removed from door.
NOTE:
Install new double-sided tape (A) to front door outside lower molding
(1) as shown.
REAR DOOR OUTSIDE LOWER MOLDING
Removal
1. Using a suitable tool (A) release clips from rear door outside
lower molding (1) starting at the rear and working forward.
CAUTION:
• Release the clips slowly and carefully.
• Do not pull the front door outside lower molding.
2. Remove the rear door outside lower molding.
Installation
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse double-sided tape, always replace with new tape.
• When installing, visually check the front door outside lower molding and clips, replace with new
clips if they have been damaged.
• When installing front door outside lower molding, make sure clips are attached to the molding. Make
sure old clips have all been removed from door.
NOTE:
Install new double-sided tape (A) to front door outside lower molding
(1) as shown.
ALKIA3378ZZ
ALKIA3366ZZ
ALKIA3379ZZ
EXT-48
< REMOVAL AND INSTALLATION >
REAR SPOILER
REAR SPOILER
Removal and Installation
INFOID:0000000011280060
The rear spoiler is part of the back door assembly. Refer to
DLK-255, "BACK DOOR ASSEMBLY : Removal
(WITH INTELLIGENT KEY SYSTEM) or
DLK-376, "BACK DOOR ASSEMBLY : Removal and
(WITHOUT INTELLIGENT KEY SYSTEM).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст