Nissan Note E12. Instruction — part 303

EXL-80

< DTC/CIRCUIT DIAGNOSIS >

DAYTIME RUNNING LIGHT RELAY CIRCUIT

Is the inspection result normal?

YES

>> Daytime running light relay circuit is OK.

NO-1 (Fixed at 0 V)>>GO TO 5.

NO-2 (Fixed at battery voltage) >>Replace IPDM E/R.

5.

CHECK DAYTIME RUNNING LIGHT RELAY CONTROL SIGNAL OPEN CIRCUIT

1. Turn ignition switch OFF.

2. Remove daytime running light relay.

3. Disconnect IPDM E/R harness connector.

4. Check continuity between IPDM E/R harness connector and daytime running light relay harness connec-

tor.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace harness.

6.

CHECK DAYTIME RUNNING LIGHT RELAY CONTROL SIGNAL SHORT CIRCUIT

Check continuity between IPDM E/R harness connector and ground.

Is the inspection result normal?

YES

>> Replace IPDM E/R.

NO

>> Repair or replace harness.

Component Inspection

INFOID:0000000009472891

1.

CHECK DAYTIME RUNNING LIGHT RELAY

1. Turn the ignition switch OFF.

2. Remove daytime running light relay.

3. Apply battery voltage to daytime running light relay- between terminals 1 and 2.

4. Check continuity between daytime running light relay terminals.

he inspection result normal?

YES

>> Daytime running light relay is normal.

NO

>> Replace daytime running light relay.

(+)

(

−)

Test item

Voltage

(Approx.)

IPDM E/R

Connector

Terminal

E45

69

Ground

DAYTIME RUN-
NING LIGHT

On

0 V

Off

Battery voltage

IPDM E/R

Daytime running light relay

Continuity

Connector

Terminal

Connector

Terminal

E45

69

E67

1

Yes

IPDM E/R

Ground

Continuity

Connector

Terminal

E45

69

No

Daytime running lamp relay

Condition

Continuity

Connector

Terminal

E67

3

Voltage

Apply

Yes

5

Not Apply

No

PARKING LAMP CIRCUIT

EXL-81

< DTC/CIRCUIT DIAGNOSIS >

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

PARKING LAMP CIRCUIT

Component Function Check

INFOID:0000000009472892

1.

CHECK PARKING LAMP OPERATION

CONSULT ACTIVE TEST

1. Select “EXTERNAL LAMPS” of IPDM E/R active test item.

2. With operating the test items, check that the parking lamp is turned ON.

Is the inspection result normal?

YES

>> Parking lamp circuit is normal.

NO

>> Refer to

EXL-81, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000009472893

1.

CHECK PARKING LAMP FUSE

1. Turn ignition switch OFF.

2. Check that the following fuse is not blown.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> GO TO 2.

2.

CHECK PARKING LAMP SHORT CIRCUIT

1. Disconnect the following connectors.

-

IPDM E/R

-

Front combination lamp

-

Front side marker lamp

2. Check continuity between IPDM E/R harness connector and ground.

Is the inspection result normal?

YES

>> Replace fuse. (Replace IPDM E/R if fuse is blown again.)

NO

>> Repair or replace harness. And then replace the fuse.

3.

CHECK PARKING LAMP BULB

Check applicable lamp bulb.
Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Replace bulb.

4.

CHECK PARKING LAMP OUTPUT VOLTAGE

CONSULT ACTIVE TEST

1. Disconnect front combination lamp connector.

2. Turn ignition switch ON.

3. Select “EXTERNAL LAMPS” of IPDM E/R active test item.

4. With operating the test items, check voltage between IPDM E/R harness connector and ground.

TAIL

: Parking lamp ON

Off

: Parking lamp OFF

Unit

Location

Fuse No.

Capacity

• Parking lamp
• Front side marker lamp

IPDM E/R

#37

10 A

IPDM E/R

Ground

Continuity

Connector

Terminal

E45

23

No

EXL-82

< DTC/CIRCUIT DIAGNOSIS >

PARKING LAMP CIRCUIT

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Replace IPDM E/R.

5.

CHECK PARKING LAMP OPEN CIRCUIT

1. Turn ignition switch OFF.

2. Disconnect IPDM E/R connector.

3. Check continuity between IPDM E/R harness connector and front combination lamp harness connector.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace harness.

6.

CHECK PARKING LAMP GROUND OPEN CIRCUIT

Check continuity between front combination lamp harness connector and ground.

Is the inspection result normal?

YES

>> Check corresponding bulb socket and harness. Repair or replace if necessary.

NO

>> Repair or replace harness.

(+)

(

−)

Test item

Voltage

(Approx.)

IPDM E/R

Connector

Terminal

RH

E45

23

Ground

EXTERNAL
LAMPS

TAIL

Battery voltage

Off

0 V

LH

TAIL

Battery voltage

Off

0 V

IPDM E/R

Front combination lamp

Continuity

Connector

Terminal

Connector

Terminal

RH

E45

23

E28 (Without

DTRL)

7

Yes

LH

E27 (Without

DTRL)

7

RH

E30 (Without
DTRL)

5

LH

E29 (Without
DTRL)

5

RH

E77 (With DTRL)

6

LH

E78 (With DTRL)

6

Front combination lamp

Ground

Continuity

Connector

Terminal

RH

E28 (Without DTRL)

8

Yes

LH

E27 (Without DTRL)

8

RH

E30 (Without DTRL)

6

LH

E29 (Without DTRL)

6

RH

E77 (With DTRL)

7

LH

E78 (With DTRL)

7

TAIL LAMP CIRCUIT

EXL-83

< DTC/CIRCUIT DIAGNOSIS >

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

TAIL LAMP CIRCUIT

Component Function Check

INFOID:0000000009472896

1.

CHECK TAIL LAMP OPERATION

CONSULT ACTIVE TEST

1. Select “EXTERNAL LAMPS” of IPDM E/R active test item.

2. With operating the test items, check that the tail lamp is turned ON.

Is the inspection result normal?

YES

>> Tail lamp circuit is normal.

NO

>> Refer to

EXL-83, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000009472897

1.

CHECK TAIL LAMP FUSE

1. Turn ignition switch OFF.

2. Check that the following fuse is not blown.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> GO TO 2.

2.

CHECK TAIL LAMP SHORT CIRCUIT

1. Disconnect IPDM E/R connector, licence plate lamp connector and rear combination lamp connector.

2. Check continuity between IPDM E/R harness connector and ground.

Is the inspection result normal?

YES

>> Replace fuse. (Replace IPDM E/R if the fuse is blown again.)

NO

>> Repair or replace harness. And then replace the fuse.

3.

CHECK TAIL LAMP BULB

Check applicable lamp bulb.
Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Replace bulb.

4.

CHECK TAIL LAMP OUTPUT VOLTAGE

CONSULT ACTIVE TEST

1. Disconnect rear combination lamp connector.

2. Turn ignition switch ON.

3. Select “EXTERNAL LAMPS” of IPDM E/R active test item.

4. With operating the test items, check voltage between IPDM E/R harness connector and ground.

TAIL

: Tail Lamp ON

Off

: Tail lamp OFF

Unit

Location

Fuse No.

Capacity

• Tail lamp
• license plate lamp

IPDM E/R

#37

10 A

IPDM E/R

Ground

Continuity

Connector

Terminal

E45

23

No