Nissan Note E12. Instruction — part 553
SEC-64
< DTC/CIRCUIT DIAGNOSIS >
P1612 CHAIN OF ECM-IMMU
P1612 CHAIN OF ECM-IMMU
DTC Logic
INFOID:0000000009567413
DTC DETECTION LOGIC
NOTE:
• If DTC P1612 is displayed with DTC U1000 (for BCM), first perform the trouble diagnosis for DTC U1000.
.
• If DTC P1612 is displayed with DTC U1010 (for BCM), first perform the trouble diagnosis for DTC U1010.
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC in Self Diagnostic Result mode of ENGINE using CONSULT.
Is DTC detected?
YES
>> Go to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000009567414
1.
REPLACE BCM
1. Replace BCM. Refer to
BCS-67, "Removal and Installation"
.
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. Refer to the CON-
SULT Immobilizer mode and follow the on-screen instructions.
Does the engine start?
YES
>> Inspection End.
NO
>> GO TO 2.
2.
REPLACE ECM
1. Replace ECM.
EC-338, "Removal and Installation"
.
2. Perform “ADDITIONAL SERVICE WHEN REPLACING ECM”.
.
>> Inspection End.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
P1612
CHAIN OF ECM-IMMU
Inactive communication between ECM
and BCM
• Harness or connectors
(The CAN communication line is open or
shorted.)
• BCM
• ECM
B2192 ID DISCORD, IMMU-ECM
SEC-65
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
B2192 ID DISCORD, IMMU-ECM
DTC Logic
INFOID:0000000009567415
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC in Self Diagnostic Result mode of BCM using CONSULT.
Is DTC detected?
YES
>> Go to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000009567416
1.
PERFORM INITIALIZATION
Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. Refer to the CONSULT
Immobilizer mode and follow the on-screen instructions.
Can the system be initialized and can the engine be started with registered Intelligent Key?
YES
>> Inspection End.
NO
>> GO TO 2.
2.
CHECK SELF-DIAGNOSIS RESULT
1. Select “Self Diagnostic Result” mode of “BCM” using CONSULT.
2. Erase DTC.
3. Perform DTC CONFIRMATION PROCEDURE for DTC B2192. Refer to
Is DTC detected?
YES
>> GO TO 3.
NO
>> Inspection End
3.
REPLACE BCM
1. Replace BCM. Refer to
BCS-67, "Removal and Installation"
.
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. Refer to the CON-
SULT Immobilizer mode and follow the on-screen instructions.
Can the system be initialized and can the engine be started with registered Intelligent Key?
YES
>> Inspection End.
NO
>> GO TO 4.
4.
REPLACE ECM
1. Replace ECM.
EC-338, "Removal and Installation"
2. Perform “ADDITIONAL SERVICE WHEN REPLACING ECM”.
.
>> Inspection End.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B2192
ID DISCORD BCM-ECM
The ID verification results between
BCM and ECM are NG.
• BCM
• ECM
SEC-66
< DTC/CIRCUIT DIAGNOSIS >
B2193 CHAIN OF ECM-IMMU
B2193 CHAIN OF ECM-IMMU
DTC Logic
INFOID:0000000009567417
DTC DETECTION LOGIC
NOTE:
• If DTC B2193 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
.
• If DTC B2193 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
.
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC in Self Diagnostic Result mode of BCM using CONSULT.
Is DTC detected?
YES
>> Go to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000009567418
1.
REPLACE BCM
1. Replace BCM. Refer to
BCS-67, "Removal and Installation"
.
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. Refer to the CON-
SULT Immobilizer mode and follow the on-screen instructions.
Does the engine start?
YES
>> Inspection End.
NO
>> GO TO 2.
2.
REPLACE ECM
1. Replace ECM.
EC-338, "Removal and Installation"
.
2. Perform “ADDITIONAL SERVICE WHEN REPLACING ECM”.
.
>> Inspection End.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B2193
CHAIN OF BCM-ECM
Inactive communication between BCM
and ECM
• Harness or connectors
(The CAN communication line is open or
shorted.)
• BCM
• ECM
B2195 ANTI-SCANNING
SEC-67
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
SEC
N
O
P
B2195 ANTI-SCANNING
DTC Logic
INFOID:0000000009567419
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC in Self Diagnostic Result mode of BCM using CONSULT.
Is DTC detected?
YES
>> Refer to
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000009567420
1.
CHECK SELF DIAGNOSTIC RESULT 1
1. Select Self Diagnostic Result mode of BCM using CONSULT.
2. Erase DTC.
3. Perform DTC CONFIRMATION PROCEDURE for DTC B2195. Refer to
Is DTC detected?
YES
>> GO TO 2.
NO
>> Inspection End.
2.
CHECK EQUIPMENT OF THE VEHICLE
Check that unspecified accessory part related to engine start is not installed.
Is unspecified accessory part related to engine start installed?
YES
>> GO TO 3.
NO
>> GO TO 4.
3.
CHECK SELF DIAGNOSTIC RESULT 2
1. Obtain the customers approval to remove unspecified accessory part related to engine start, and then
remove it.
2. Select Self Diagnostic Result of BCM using CONSULT.
3. Erase DTC.
4. Perform DTC CONFIRMATION PROCEDURE for DTC B2195. Refer to
Is DTC detected?
YES
>> GO TO 4.
NO
>> Inspection End.
4.
REPLACE BCM
1. Replace BCM. Refer to
BCS-67, "Removal and Installation"
.
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT. Refer to the CON-
SULT Immobilizer mode and follow the on-screen instructions.
>> Inspection End.
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B2195
ANTI-SCANNING
ID verification between BCM and ECM that is
out of the specified specification is detected.
ID verification request out of the
specified specification
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст