Nissan Note E12. Instruction — part 703
WIPER AND WASHER SWITCH
WW-63
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
WIPER AND WASHER SWITCH
Removal and Installation
INFOID:0000000009578916
The wiper and washer switch is part of the combination switch. Refer to
WW-64
< REMOVAL AND INSTALLATION >
REAR WIPER ARM
REAR WIPER ARM
Exploded View
INFOID:0000000009606296
Removal and Installation
INFOID:0000000009606297
REMOVAL
1. Operate the rear wiper to move it to the auto stop position.
2. Remove rear wiper arm cover.
3. Remove nut and rear wiper arm.
INSTALLATION
1. Clean the rear wiper arm as shown. This will reduce the possibil-
ity of wiper arm looseness.
2. Adjust the rear wiper blade position. Refer to
3. Install the rear wiper arm and nut.
4. Install the rear wiper arm cover.
5. Check that the rear wiper blade stops at the specified position. Refer to
1.
Rear wiper motor
2.
Rear wiper arm seal
3.
Rear wiper arm cover
4.
Rear wiper arm
5.
Rear wiper blade
ALLIA1312ZZ
SKIA0082J
REAR WIPER ARM
WW-65
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Adjustment
INFOID:0000000009606298
WIPER BLADE POSITION ADJUSTMENT
1.
Back door window glass
2.
Back door
3.
Rear wiper blade
A.
30.7
± 7.5 mm (1.21 ± 0.30 in)
ALLIA1313ZZ
WW-66
< REMOVAL AND INSTALLATION >
REAR WIPER BLADE
REAR WIPER BLADE
Removal and Installation
INFOID:0000000009606299
REMOVAL
1. Lift the rear wiper arm and blade assembly away from the back window glass.
2. Push the release tab (A) of the rear wiper blade (1), then move
the rear wiper blade down the rear wiper arm (2) to remove.
INSTALLATION
1. Insert the rear wiper blade onto the rear wiper arm until it clicks into place.
JMLIA1044ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст