Nissan Note E12. Instruction — part 702
FRONT WIPER ARM
WW-59
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
4. Install front wiper arm and front wiper arm nut.
CAUTION:
Tighten front wiper arm nut to specification. Refer to
5. Install front wiper arm cap.
6. Check that wiper blades stop at the specified position. Refer to
.
Adjustment
INFOID:0000000009606290
WIPER BLADE POSITION ADJUSTMENT
ALLIA1309ZZ
1.
Wiper blade (RH)
2.
Front fender (RH)
3.
Windshield glass
4.
Cowl top cover
5.
Wiper blade (LH)
C.
28.0
± 7.5 mm (1.10 ± 0.30 in)
D.
60.7
± 7.5 mm (2.39 ± 0.30 in)
WW-60
< REMOVAL AND INSTALLATION >
FRONT WIPER BLADE
FRONT WIPER BLADE
Removal and Installation
INFOID:0000000009606291
REMOVAL
1. Lift up wiper arm and set to the position where wiper arm can be locked back.
2. Push the release tab (A) of the front wiper blade (1), then move
the front wiper blade down the front wiper arm (2) to remove.
CAUTION:
Be careful not to drop the wiper arm onto the windshield
glass.
INSTALLATION
Insert the front wiper blade onto the front wiper arm until it clicks into place.
JMLIA1044ZZ
FRONT WIPER DRIVE ASSEMBLY
WW-61
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
FRONT WIPER DRIVE ASSEMBLY
Exploded View
INFOID:0000000009606292
Removal and Installation
INFOID:0000000009606293
REMOVAL
1. Remove cowl top cover. Refer to
EXT-23, "Removal and Installation"
.
2. Disconnect the harness connector from front wiper motor.
3. Remove bolts and front wiper drive assembly.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Tighten front wiper drive assembly bolts to specification. Refer to
.
1.
Wiper arm cap (LH/RH)
2.
Wiper arm (LH)
3.
Wiper blade (LH)
4.
Wiper arm (RH)
5.
Wiper blade (RH)
6.
Front wiper drive assembly
ALLIA1310ZZ
WW-62
< REMOVAL AND INSTALLATION >
FRONT WIPER DRIVE ASSEMBLY
Exploded View
INFOID:0000000009606294
Disassembly and Assembly
INFOID:0000000009606295
DISASSEMBLY
1. Remove front wiper drive assembly. Refer to
WW-61, "Removal and Installation"
2. Remove wiper linkage 1 and 2 from the front wiper drive.
CAUTION:
Do not bend the linkage or damage the plastic part of the ball joint when removing the wiper link-
age.
3. Remove screws and wiper motor from front wiper drive.
ASSEMBLY
1. Install wiper motor screws and wiper motor to front wiper drive.
2. Install wiper linkage 2 to the front wiper drive.
CAUTION:
• Do not drop wiper motor or cause it to come into contact with other parts.
• Be careful of the grease condition at the wiper motor and wiper linkage joint (retainer). Apply a
suitable multi
−purpose grease if necessary.
3. Install wiper linkage 1 to the wiper motor and the front wiper drive.
4. Install front wiper drive assembly. Refer to
WW-61, "Removal and Installation"
1.
Wiper linkage 2
2.
Wiper linkage 1
3.
Front wiper motor
4.
Front wiper drive
ALLIA1311ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст