Nissan Note E12. Instruction — part 672
TM-246
< REMOVAL AND INSTALLATION >
[CVT: RE0F11A]
WATER HOSE
6. Remove the bracket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse hose clamps.
• Do not reuse clips.
• When installing bracket A to the transaxle assembly.
- Face arrow (A) of bracket A toward the front of the vehicle.
- Set baffle (B) of bracket A to rib (C) of transaxle.
• When installing the bracket B to the transaxle assembly.
- Face arrow (A) of bracket A towards the top of vehicle.
- Insert baffle (B) into the boss hole (C) of transaxle.
• Refer to the following when installing water hoses.
• Refer to the following when installing hose clamp.
CAUTION:
Hose clamp should not interfere with the bulge of fluid cooler tube.
: Front
JSDIA4112ZZ
: Front
JSDIA4113ZZ
Water hose (1)
Installation side
tube (2)
Direction of paint
mark
Hose insertion depth
(L)
Water hose A
Water outlet
Upward
(A): 27 mm (1.06 in)
(End reaches the 2-
stage bulge.)
CVT oil warmer
Frontward
Water hose B
CVT oil warmer
Frontward
Water bypass pipe
Rightward (Align
with the mark of
the water by-
pass pipe side)
Water hose C
Water bypass pipe
—
Water outlet
Upward
JSDIA2459ZZ
WATER HOSE
TM-247
< REMOVAL AND INSTALLATION >
[CVT: RE0F11A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Inspection
INFOID:0000000009020050
INSPECTION AFTER INSTALLATION
Start the engine and check visually that there is no leakage of engine coolant.
Water hose (1)
Installation side
tube (2)
Hose clamp (3)
Dieection of tab
Clamping position
Water hose A
Water outlet
Upward
5 - 7 mm (0.20 - 0.28
in) (A) from hose end
CVT oil warmer
Frontward
Water hose B
CVT oil warmer
Leftward
Water bypass pipe Rightward
Water hose C
Water bypass pipe
Upward and 45
°
frontward
Water outlet
Upward and 45
°
frontward
JSDIA2424ZZ
TM-248
< REMOVAL AND INSTALLATION >
[CVT: RE0F11A]
FLUID COOLER HOSE
FLUID COOLER HOSE
Exploded View
INFOID:0000000009300274
Removal and Installation
INFOID:0000000009300275
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spill-
ing.
REMOVAL
1. Remove the front bumper fascia. Refer to
EXT-16, "Removal and Installation"
.
2. Disconnect oil cooler hoses.
3. Remove oil cooler bolts.
4. Remove oil cooler assembly.
INSTALLATION
Installation is in the reverse order of removal.
After installation be sure to check the CVT fluid and add the specified CVT fluid as necessary. Refer to
CAUTION:
Do not reuse hose clamps.
Inspection and Adjustment
INFOID:0000000009300276
INSPECTION AFTER INSTALLATION
Check for CVT fluid leakage. Refer to
.
ADJUSTMENT AFTER INSTALLATION
Adjust the CVT fluid level. Refer to
.
1.
CVT oil cooler
2.
Hoses
ALDIA0228ZZ
PLUG
TM-249
< REMOVAL AND INSTALLATION >
[CVT: RE0F11A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
PLUG
Description
INFOID:0000000009020051
Replace the O-ring if oil leakage or exudes from the plug.
Exploded View
INFOID:0000000009020052
Removal and Installation
INFOID:0000000009020053
REMOVAL
Remove the plugs and O-rings.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-rings.
• Apply Genuine NISSAN CVT Fluid NS-3 to O-rings.
Inspection and Adjustment
INFOID:0000000009020054
INSPECTION AFTER INSTALLATION
Check for CVT fluid leakage. Refer to
.
ADJUSTMENT AFTER INSTALLATION
Adjust the CVT fluid level. Refer to
.
1.
Plug
2.
O-ring
3.
O-ring
4.
Plug
Genuine NISSAN CVT Fluid NS-3
JSDIA1889GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст