Nissan Note E12. Instruction — part 402
INT-30
< REMOVAL AND INSTALLATION >
HEADLINING
• Apply adhesive as shown before installing headlining.
• Do not bend headlining when installing.
• When installing headlining, start by installing both sun visor holders and headlining clips to hold
headlining in position.
• Be careful that the surface is not wrinkled when installing.
1. Headlining
A. Adhesive application location
B. Adhesive
C. 8 mm
D. 5 mm
AWJIA1102ZZ
LUGGAGE TRIM
INT-31
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
LUGGAGE TRIM
Exploded View
INFOID:0000000009016052
LUGGAGE REAR PLATE
1.
Parcel shelf finisher
2.
Luggage floor board (if equipped)
3.
Luggage side upper finisher (LH)
4.
Luggage side front reinforcement (LH) 5.
Luggage side rear reinforcement (LH) 6.
Luggage side lower finisher (LH)
7.
Luggage rear plate
8.
Luggage side lower finisher (RH)
9.
Luggage side rear reinforcement (RH)
10. Luggage side front reinforcement
(RH)
11. Luggage side upper finisher (RH)
12. Luggage side front cover (RH)
13. Luggage side clip
14. Luggage side rear cover (RH)
15. Luggage floor box
16. Luggage side rear cover (LH)
17. Luggage side front cover (LH)
18. Luggage floor trim
Pawl
Metal clip
Clip
Front
AWJIA1129ZZ
I N
T
- 3
2
< REMOVAL AND INSTALLATION >
LUGGAGE TRIM
LUGGAGE REAR PLATE : Removal and Installation
INFOID:0000000009016053
REMOVAL
1. Remove luggage floor board (if equipped).
2. Remove luggage floor trim.
3. Remove luggage rear plate clips (A).
4. Release luggage rear plate clips using a suitable tool (A) and
remove luggage rear plate as shown.
: Clip
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Visually check the clips and pawls for deformation and damage during installation.
• When installing luggage rear plate, check that clips are securely placed into body holes.
LUGGAGE SIDE LOWER FINISHER
LUGGAGE SIDE LOWER FINISHER : Removal and Installation
INFOID:0000000009016054
REMOVAL
1. Partially remove rear body side welt. Refer to
INT-22, "BODY SIDE WELT : Removal and Installation"
2. Remove luggage floor board (if equipped).
3. Remove luggage floor trim.
4. Remove seat back hinge. Refer to
SE-20, "SEATBACK HINGE : Removal and Installation"
5. Release rear parcel shelf finisher clips using a suitable tool and remove rear parcel shelf finisher (if
equipped).
6. Remove luggage side lower finisher pawls using a suitable tool.
AWJIA1127ZZ
AWJIA1128ZZ
LUGGAGE TRIM
INT-33
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
: Pawl
7. Release the harness connector from cargo room lamp (RH only) and remove luggage side lower finisher.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Visually check the clips and pawls for deformation and damage during installation.
• When installing luggage side clip, press luggage side clip so that upper side stamp mark faces
toward passenger room, and then completely engage luggage side clip pawls.
LUGGAGE SIDE UPPER FINISHER
LUGGAGE SIDE UPPER FINISHER : Removal and Installation
INFOID:0000000009016055
REMOVAL
1. Remove luggage side lower finisher. Refer to
INT-32, "LUGGAGE SIDE LOWER FINISHER : Removal
2. Remove seat belt lower anchor bolt.
3. Release luggage side upper finisher clips using a suitable tool
and remove luggage side upper finisher.
: Clip
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Visually check the clips for deformation and damage during installation.
• When installing luggage side upper finisher, check that clips are placed in body holes.
AWJIA1095ZZ
AWJIA1097ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст