Nissan Frontier. Instruction — part 15
AV-52
< REMOVAL AND INSTALLATION >
[BASE AUDIO (EXCEPT MEXICO)]
REAR DOOR SPEAKER
REAR DOOR SPEAKER
Removal and Installation
INFOID:0000000009482096
REMOVAL
1. Remove the rear door finisher. Refer to
INT-15, "Removal and Installation"
.
2. Remove the rear door speaker screws (A).
3. Disconnect the harness connector (B) from the rear door
speaker (1) and remove.
NOTE:
King cab shown, crew cab similar.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1071ZZ
AV
STEERING SWITCH
AV-53
< REMOVAL AND INSTALLATION >
[BASE AUDIO (EXCEPT MEXICO)]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
STEERING SWITCH
Removal and Installation
INFOID:0000000010239655
Removal and Installation
REMOVAL
1. Remove the driver air bag module. Refer to
SR-11, "Removal and Installation"
.
2. Remove the steering wheel audio control switch assembly screws.
3. Disconnect the harness connectors from the steering wheel audio control switches.
4. Remove the steering wheel audio control switches by pulling on
steering wheel audio control switches to release the pawls.
: Pawl
CAUTION:
Do not tilt steering wheel audio control switches during
removal or damage may occur to the pawls.
INSTALLATION
Installation is in the reverse order of removal.
1. Steering wheel
2.
Steering wheel audio control switches
ALNIA0357ZZ
ALNIA1214ZZ
AV-54
< REMOVAL AND INSTALLATION >
[BASE AUDIO (EXCEPT MEXICO)]
BLUETOOTH CONTROL UNIT
BLUETOOTH CONTROL UNIT
Removal and Installation
INFOID:0000000010239656
REMOVAL
NOTE:
Do not remove the RH front seat from the vehicle.
1. Remove the RH front seat bolts, disconnect the harness connectors from the RH front seat. Refer to
32, "Removal and Installation"
.
2. Tilt the RH front seat back to access the bluetooth control unit.
1.
Bluetooth control unit front bracket
2.
Bluetooth control unit/antenna
3.
Bluetooth control unit rear bracket
Front
ALNIA1069ZZ
AV
BLUETOOTH CONTROL UNIT
AV-55
< REMOVAL AND INSTALLATION >
[BASE AUDIO (EXCEPT MEXICO)]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
3. Disconnect the harness connector (B) from the Bluetooth control
unit.
4. Remove the Bluetooth control unit screws (A), then remove the
Bluetooth control unit assembly (1).
5. Remove the Bluetooth control unit bracket screws and Bluetooth
control unit front and rear brackets.
INSTALLATION
Installation is in the reverse order of removal.
AWNIA1812ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст