Nissan Frontier. Instruction — part 16

AV-56

< REMOVAL AND INSTALLATION >

[BASE AUDIO (EXCEPT MEXICO)]

MICROPHONE

MICROPHONE

Removal and Installation

INFOID:0000000010239660

REMOVAL

1. Remove the roof console. Refer to

INT-25, "Removal and Installation"

.

2. Release the pawls that retain the Bluetooth microphone (1) to

the roof console.

3. Disconnect the harness connector (A) from the Bluetooth micro-

phone (1) and remove.

INSTALLATION

Installation is in the reverse order of removal.

ALNIA2931ZZ

AV

AUDIO ANTENNA

AV-57

< REMOVAL AND INSTALLATION >

[BASE AUDIO (EXCEPT MEXICO)]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

AUDIO ANTENNA

Location of Antenna

INFOID:0000000009482097

Removal and Installation

INFOID:0000000009482098

REMOVAL

1. Remove instrument lower panel RH and glove box. Refer to

IP-24, "Removal and Installation"

.

2. Disconnect audio antenna cable from antenna feeder.
3. Remove antenna rod.
4. Remove rubber seal.
5. Remove cowl top. Refer to

EXT-24, "Removal and Installation"

.

6. Remove fender protector. Refer to

EXT-27, "Removal and Instal-

lation of Front Fender Protector"

.

7. Remove antenna base bolts.
8. Remove antenna base and cable.

AWNIA2927ZZ

1.

Coaxial antenna feeder

2.

Coaxial connector

AEL610C

AV-58

< REMOVAL AND INSTALLATION >

[BASE AUDIO (EXCEPT MEXICO)]

AUDIO ANTENNA

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

Always properly tighten the antenna rod during installation or the antenna rod may bend or break dur-

ing vehicle operation.

AV

DIAGNOSIS AND REPAIR WORKFLOW

AV-59

< BASIC INSPECTION >

[BASE AUDIO (FOR MEXICO)]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

BASIC INSPECTION

DIAGNOSIS AND REPAIR WORKFLOW

Work Flow

INFOID:0000000010227910

OVERALL SEQUENCE

DETAILED FLOW

1.

GET INFORMATION FOR SYMPTOM

Get detailed information from the customer about the symptom (the condition and the environment when the

incident/malfunction occurred).

>> GO TO 2

2.

CONFIRM THE SYMPTOM

Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition

when the symptom is detected.

>> GO TO 3

3.

DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE

Inspect according to Diagnostic Procedure of the system.

ALNIA0182GB