Nissan Frontier. Instruction — part 64
AV-248
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO WITH AMPLIFIER]
REAR VIEW CAMERA
REAR VIEW CAMERA
Removal and Installation
INFOID:0000000009482186
REMOVAL
1. Remove the tail gate protector. Refer to
EXT-38, "Removal and Installation"
.
2. Remove the rear view camera screws and the rear view camera.
INSTALLATION
Installation is in the reverse order of removal.
AV
COMPONENT PARTS
AV-249
< SYSTEM DESCRIPTION >
[NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts Location
INFOID:0000000009482187
AWNIA2912ZZ
AV-250
< SYSTEM DESCRIPTION >
[NAVIGATION]
COMPONENT PARTS
Component Description
INFOID:0000000009482188
1.
Front tweeter LH M109
2.
Steering wheel audio control switches 3.
AV control unit M96, M97, M98, M99,
M100
4.
Front tweeter RH M111
5.
Microphone R8
6.
GPS antenna (Underneath instrument
panel, forward of combination meter)
7.
Front door speaker LH D12
Front door speaker RH D112
8.
Rear door tweeter LH D208
Rear door tweeter RH D308
9.
Rear door speaker LH D207
Rear door speaker RH D307
10. Audio amp B158, B159 (Underneath
passenger seat)
11. Subwoofer B72 (Underneath rear LH
seat)
12. USB interface M214
13. AUX in jack M215
14. Rear view camera C251
15. Satellite antenna
16. Rod antenna
Part name
Description
AV control unit
• Operation of navigation and audio systems are integrated.
• Includes the audio, hands-free phone, navigation, satellite radio, rear view
monitor, USB connection and AUX IN connection functions.
• Map data can be loaded from SD-card inserted in SD-card slot.
• Audio signals are output to audio amplifier.
• Inputs illumination signals required for display dimming control.
• Inputs signals for driving status recognition (vehicle speed and reverse).
• Touch panel functions can be operated by touching display directly.
Map SD-card
A collection of Map data.
Audio amplifier
Receives audio signals from AV control unit and outputs audio signals to each
speaker.
Front tweeters
Outputs high, mid and low range audio signals from audio amp.
Front door speakers
Rear tweeters
Rear door speakers
Subwoofer
Steering wheel audio control switches
• Operations for audio, hands-free phone and voice recognition are possible.
• Steering switch signal is output to combination meter.
• Combination meter outputs steering switch signal to AV control unit.
Microphone
• Used for hands-free phone operations.
• Microphone signal is transmitted to AV control unit.
• Power is supplied from AV control unit.
USB interface
USB sound and data signals are transmitted to AV control unit.
AUX input
Auxillary sound signals are transmitted to AV control unit.
Rear view camera
• Outputs image of vehicle rear to AV control unit.
• Power is supplied from AV control unit.
Satellite antenna
Satellite radio signal is received and transmitted to AV control unit.
GPS antenna
GPS signal is received and transmitted to AV control unit.
Rod antenna
AM/FM signal is received and transmitted to AV control unit.
AV
SYSTEM
AV-251
< SYSTEM DESCRIPTION >
[NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYSTEM
System Diagram
INFOID:0000000009482189
System Description
INFOID:0000000009482190
Refer to Owner’s Instruction for navigation and audio system operating instructions.
Audio function and display are built into AV control unit.
This navigation has the following functions.
• Map data on SD-card
• Full support for playback of music from iPod
®
and USB device
• High resolution color 5 inch display with touch panel function
• FM/AM twin digital tuner
• USB mass storage connection
• Satellite radio
• Hands-free phone system
iPod
®
is a trademark of Apple inc., registered in the U.S. and other countries.
NAVIGATION SYSTEM FUNCTION
Description
• The navigation system can be operated by control panel of the AV control unit and display (touch panel) of
the AV control unit.
• Guide sound during the operation of the navigation system is output from AV control unit to front speakers.
• AV control unit calculates the vehicle location based on the signals from GYRO (angle speed sensor), vehi-
cle sensor, and GPS satellite, as well as the map data from map SD-card. The vehicle location is displayed
on the AV control unit.
POSITION DETECTION PRINCIPLE
The navigation system periodically calculates the vehicle's current position according to the following three
signals:
• Travel distance of the vehicle as determined by the vehicle speed sensor
• Turning angle of the vehicle as determined by the gyroscope (angular velocity sensor)
• Direction of vehicle travel as determined by the GPS antenna (GPS information)
The current position of the vehicle is then identified by comparing the calculated vehicle position with map data
read from the map SD-card (map-matching), and indicated on the screen as a vehicle mark. More accurate
data is judged and used by comparing vehicle position detection results found by the GPS with the result by
map-matching.
AWNIA2777GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст