Nissan Maxima. Instruction — part 374
DOOR
DLK-215
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3. Remove front door hinge nuts (A) (door side) and the door
assembly.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Check front door check link and hinge rotating point for poor lubrication. If necessary, apply a suit-
able multi-purpose grease.
• After installation, check front door open/close, lock/unlock operation.
• After installation, perform the front door adjustment procedure. Refer to
• After adjusting, apply touch-up paint (body color) to the head of front door hinge bolts and nuts.
FRONT DOOR : Adjustment
INFOID:0000000009471769
ADJUSTMENT
ALKIA2793ZZ
DLK-216
< REMOVAL AND INSTALLATION >
DOOR
Check the clearance and surface height between front door and each part by visual inspection and tactile feel.
If the clearance and the surface height are out of specification, adjust them according to the adjustment proce-
dure.
Unit: mm (in)
LONGITUDINAL CLEARANCE
1. Confirm the rear door adjustments and adjust if necessary. Refer to
2. Remove the front fender. Refer to
DLK-211, "Removal and Installation"
1.
Front fender
2.
Front door assembly
3.
Rear door assembly
AWKIA1339GB
Section
Item
Measurement
Standard
A-A
D
Clearance
4.25
± 1.0 (0.17 ± 0.04)
E
Surface height
0.0
± 1.0 (0.0 ± 0.04)
B-B
F
Clearance
4.25
± 1.0 (0.17 ± 0.04)
G
Surface height
0.0
± 1.0 (0.0 ± 0.04)
DOOR
DLK-217
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
3. Loosen the hinge bolts.
4. Raise or lower the front door assembly at rear edge to adjust until it is within specifications provided.
5. Tighten the hinge bolts.
6. Install the front fender. Refer to
DLK-211, "Removal and Installation"
.
SURFACE HEIGHT ADJUSTMENT
1. Loosen the front door hinge nuts.
2. Move the top and or bottom in or out as necessary until it is within specifications provided.
3. Tighten the hinge nuts to specifications.
REAR DOOR
REAR DOOR : Exploded View
INFOID:0000000009471770
REAR DOOR : Removal and Installation
INFOID:0000000009471771
CAUTION:
• Use two people when removing or installing the rear door assembly due to its heavy weight.
• When removing and installing rear door assembly, support rear door with a suitable tool.
REMOVAL
1. Pull out grommet and disconnect rear door harness connector.
2. Remove the check link bolt from the center pillar.
1.
Rear door assembly
2.
Rear door check link
3.
Rear door lower hinge
4.
Rear door upper hinge
Grease
ALKIA2794ZZ
DLK-218
< REMOVAL AND INSTALLATION >
DOOR
3. Remove rear door hinge nuts (a) (door side) and the door
assembly (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Check rear door check link and hinge rotating point for poor lubrication. If necessary, apply a suit-
able multi-purpose grease.
• After installation, check rear door open/close, lock/unlock operation.
• After installation, perform the rear door adjustment procedure. Refer to
• After adjusting, apply touch-up paint (body color) to the head of rear door hinge bolts and nuts.
REAR DOOR : Adjustment
INFOID:0000000009471772
ADJUSTMENT
ALKIA0016GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст