Nissan Maxima. Instruction — part 170
AV-500
< REMOVAL AND INSTALLATION >
[COLOR DISPLAY - W/ BOSE]
ANTENNA AMP.
ANTENNA AMP.
Removal and Installation
INFOID:0000000009471413
REMOVAL
1. Remove the rear pillar finisher RH. Refer to
2. Detach the antenna amp. harness clip (A).
3. Disconnect the harness connectors (B) from the antenna amp.
(1).
4. Remove the antenna amp. screw (C) and the antenna amp. (1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0043ZZ
AV
MICROPHONE
AV-501
< REMOVAL AND INSTALLATION >
[COLOR DISPLAY - W/ BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
MICROPHONE
Removal and Installation
INFOID:0000000009471414
REMOVAL
1. Remove the front room/map lamp assembly. Refer to
INL-84, "Removal and Installation"
2. Detach the microphone connector (A).
3. Remove the front room/map lamp covers (1), then remove the
map lamp assembly cover (2).
4. Release the microphone tabs (A), then remove the microphone
(1).
INSTALLATION
Installation is in the reverse order of removal.
ALNIA0928ZZ
ALNIA0929ZZ
ALNIA0930ZZ
AV-502
< REMOVAL AND INSTALLATION >
[COLOR DISPLAY - W/ BOSE]
TEL ANTENNA
TEL ANTENNA
Removal and Installation
INFOID:0000000009471415
REMOVAL
1. Disconnect the battery negative terminal. Refer to
PG-67, "Removal and Installation (Battery)"
2. Remove the rear parcel shelf finisher. Refer to
INT-28, "Removal and Installation"
.
3. Remove the Bluetooth antenna screw (A).
4. Detach the Bluetooth antenna harness clip (B).
5. Fold down the rear seat (if equipped) or open the trunk lid, then
detach the Bluetooth antenna harness clip (C).
6. Disconnect the harness connector (D) from the Bluetooth
antenna (1) and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1144ZZ
AV
BLUETOOTH CONTROL UNIT
AV-503
< REMOVAL AND INSTALLATION >
[COLOR DISPLAY - W/ BOSE]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BLUETOOTH CONTROL UNIT
Removal and Installation
INFOID:0000000009471416
REMOVAL
1. Disconnect the battery negative terminal. Refer to
PG-67, "Removal and Installation (Battery)"
2. Remove the trunk upper finisher. Refer to
3. Remove the parcel shelf finisher. Refer to
INT-28, "Removal and Installation"
4. From inside the passenger compartment, remove the bracket screws and lower the assembly for access.
5. Remove the Bluetooth control unit screws (A).
6. Disconnect the harness connector (B) from the Bluetooth control
unit and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1154ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст