Nissan Maxima. Instruction — part 644
EXL-318
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
FRONT COMBINATION LAMP
REMOVAL AND INSTALLATION
FRONT COMBINATION LAMP
Exploded View
INFOID:0000000009465387
Removal and Installation
INFOID:0000000009465388
FRONT COMBINATION LAMP
Removal
1. Remove the front bumper fascia. Refer to
EXT-16, "Removal and Installation"
.
2. Remove the front combination lamp bolts.
3. Remove the harness clips from the front combination lamp assembly.
4. Pull out the front combination lamp toward the front of vehicle.
5. Disconnect the harness connectors from the front combination lamp and remove.
Installation
Installation is in the reverse order of removal.
NOTE:
After installation, perform headlamp aiming adjustment. Refer to
EXL-315, "Aiming Adjustment Procedure"
.
HALOGEN BULB (LOW BEAM)
Removal
WARNING:
Do not touch bulb with your hand while it is on or right after being turned off, a burn injury may result.
CAUTION:
• After installing the bulb, install the plastic cover and the bulb socket securely for watertightness.
• Do not touch bulb glass with your hand or keep other grease and oily substances away from bulb
glass.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
1. Remove the front combination lamp. Refer to
EXL-318, "Removal and Installation"
.
2. Rotate the bulb socket counterclockwise and unlock from the front combination lamp.
3. Remove the bulb from the bulb socket
Installation
1.
Front combination lamp
ALLIA0897ZZ
FRONT COMBINATION LAMP
EXL-319
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Installation is in the reverse order of removal.
HALOGEN BULB (HIGH BEAM)
Removal
1. Remove the front combination lamp. Refer to
EXL-318, "Removal and Installation"
.
2. Rotate the bulb socket counterclockwise and unlock from the front combination lamp.
3. Remove the bulb from the bulb socket.
Installation
Installation is in the reverse order of removal.
FRONT TURN SIGNAL LAMP BULB
Removal
1. Remove the front combination lamp. Refer to
EXL-318, "Removal and Installation"
.
2. Rotate the bulb socket counterclockwise and unlock from the front combination lamp.
3. Remove the bulb from the bulb socket.
Installation
Installation is in the reverse order of removal.
FRONT SIDE MARKER LAMP BULB
Removal
1. Remove the front combination lamp. Refer to
EXL-318, "Removal and Installation"
.
2. Rotate the bulb socket counterclockwise and unlock from the front combination lamp.
3. Remove the bulb from the bulb socket.
Installation
Installation is in the reverse order of removal.
EXL-320
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
FRONT FOG LAMP
FRONT FOG LAMP
Exploded View
INFOID:0000000009465389
Removal and Installation
INFOID:0000000009465390
FRONT FOG LAMP
Removal
1. Remove the front bumper fascia. Refer to
EXT-16, "Removal and Installation"
.
2. Disconnect the harness connector from the fog lamp.
3. Remove the front fog lamp bolts.
4. Remove the front fog lamp.
Installation
Installation is in the reverse order of removal.
NOTE:
After installation, perform front fog lamp aiming adjustment. Refer to
EXL-317, "Aiming Adjustment Proce-
.
FRONT FOG LAMP BULB
Removal
WARNING:
Do not touch bulb with your hand while it is on or right after being turned off, a burn injury may result.
CAUTION:
• Do not touch bulb glass with your hand or keep other grease and oily substances away from bulb
glass.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
1.
Front bumper fascia
2.
Front fog lamp
3.
Front fog lamp bracket
4.
Clip
5.
Spring nuts
ALLIA0899ZZ
FRONT FOG LAMP
EXL-321
< REMOVAL AND INSTALLATION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
1. Remove the front fender protector. Refer to
EXT-24, "Removal and Installation"
2. Disconnect the harness connector (1) from the front fog lamp.
3. Rotate the bulb (2) counterclockwise and unlock it.
Installation
Installation is in the reverse order of removal.
ALLIA0894ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст