Nissan Maxima. Instruction — part 645

EXL-322

< REMOVAL AND INSTALLATION >

[HALOGEN TYPE]

OPTICAL SENSOR

OPTICAL SENSOR

Exploded View

INFOID:0000000009465391

Removal and Installation

INFOID:0000000009465392

CAUTION:

Whenever a suitable tool is used, always wrap a cloth around the end of the tool to protect compo-

nents from damage.

REMOVAL

1. Carefully remove the LH front tweeter speaker grille using a suitable tool.
2. Insert a suitable tool between the optical sensor and the LH front tweeter speaker grille. Lift the optical

sensor upward.

3. Disconnect the harness connector from the optical sensor and remove.

INSTALLATION

Installation is in the reverse order of removal.

1.

Optical sensor

2.

LH front tweeter speaker grille

3.

Optical sensor harness connector

4.

LH front tweeter speaker

5.

Instrument panel

ALLIA0900ZZ

DOOR MIRROR TURN SIGNAL LAMP

EXL-323

< REMOVAL AND INSTALLATION >

[HALOGEN TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

DOOR MIRROR TURN SIGNAL LAMP

Removal and Installation

INFOID:0000000009465393

The door mirror turn signal lamp is an integral part of the door mirror and must be replaced as an assembly.

Refer to

MIR-19, "Removal and Installation"

.

EXL-324

< REMOVAL AND INSTALLATION >

[HALOGEN TYPE]

LIGHTING & TURN SIGNAL SWITCH

LIGHTING & TURN SIGNAL SWITCH

Removal and Installation

INFOID:0000000009465394

NOTE:

The lighting and turn signal switch is integral with the combination switch assembly.

REMOVAL

1. Unlock steering wheel.

CAUTION:

• Before servicing, disconnect both battery terminals and wait at least three minutes

• Do not use air tools or electric tools for servicing.

• After the work is completed, make sure no system malfunction is detected by air bag warning

lamp.

• In case a malfunction is detected by the air bag warning lamp, reset with the self-diagnosis func-

tion and delete the memory with CONSULT.

• If a malfunction is still detected after the above operation, perform self-diagnosis to repair mal-

functions. Refer to

SRC-12, "SRS Operation Check"

.

2. Remove steering column covers. Refer to

IP-13, "Removal and Installation"

.

3. Rotate steering wheel clockwise to access first combination switch bolt, then remove bolt.
4. Rotate steering wheel counter-clockwise to access second combination switch bolt, then remove bolt.
5. Disconnect the harness connectors from the lighting and turn signal switch and remove.

INSTALLATION

Installation is in the reverse order of removal.

HAZARD SWITCH

EXL-325

< REMOVAL AND INSTALLATION >

[HALOGEN TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

HAZARD SWITCH

Exploded View

INFOID:0000000009465395

Removal and Installation

INFOID:0000000009465396

REMOVAL

1. Remove cluster lid D. Refer to

IP-18, "Removal and Installation"

.

2. Disconnect the harness connector from the hazard switch.
3. Remove the hazard switch.

INSTALLATION

Installation is in the reverse order of removal.

1.

Hazard switch

2.

Cluster lid D

ALLIA0901ZZ