Nissan Maxima. Instruction — part 1207
C1716 - C1719 TRANSMITTER PRESSURE MALFUNCTION
WT-17
< DTC/CIRCUIT DIAGNOSIS >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
C1716 - C1719 TRANSMITTER PRESSURE MALFUNCTION
Description
INFOID:0000000010046344
Air pressure data from one or more transmitters is out of range.
DTC Logic
INFOID:0000000010046345
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
ID REGISTRATION AND VEHICLE DRIVING
1. Carry out ID registration of all transmitters. Refer to
WT-6, "ID Registration Procedure"
.
2. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for
10 minutes.
3. Check all tire pressures with CONSULT within 5 minutes.
Does “DATA MONITOR ITEM” display tire pressure as normal without any warning lamp?
YES
>> Inspection End.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000010046346
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
MALFUNCTION CODE NO. 35, 36, 37 OR 38 (DTC C1716, C1717, C1718 OR C1719)
1.
CHECK ALL TIRE PRESSURES
Check all tire pressures. Refer to
Are there any tires with pressure of 64 psi or more?
YES
>> Adjust tire pressure to specified value.
NO
>> GO TO 2
2.
ID REGISTRATION AND VEHICLE DRIVING
1. Carry out ID registration of all transmitters. Refer to
WT-6, "ID Registration Procedure"
.
2. Drive at a speed of 40 km/h (25 MPH) or more for several minutes without stopping.
3. Check all tire pressures with CONSULT within 15 minutes after vehicle speed becomes 17 km/h (11
MPH).
DTC
CONSULT
DTC detecting condition
C1716
[PRESSDATA - ERR] FL
Air pressure data from FL transmitter is malfunctioning.
C1717
[PRESSDATA - ERR] FR
Air pressure data from FR transmitter is malfunctioning.
C1718
[PRESSDATA - ERR] RR
Air pressure data from RR transmitter is malfunctioning.
C1719
[PRESSDATA - ERR] RL
Air pressure data from RL transmitter is malfunctioning.
WT-18
< DTC/CIRCUIT DIAGNOSIS >
C1716 - C1719 TRANSMITTER PRESSURE MALFUNCTION
Does “DATA MONITOR ITEM” display 64 psi or more?
YES
>> Replace malfunctioning transmitter, then GO TO 3. Refer to
WT-62, "Removal and Installation"
NO
>> GO TO 3
3.
ID REGISTRATION AND VEHICLE DRIVING
1. Carry out ID registration of all transmitters. Refer to
WT-6, "ID Registration Procedure"
2. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for
10 minutes.
3. Check all tire pressures with CONSULT within 5 minutes.
Does “DATA MONITOR ITEM” display tire pressure as normal without any warning lamp?
YES
>> Inspection End.
NO
>> Proceed to the inspection applicable to DTC.
Special Repair Requirement
INFOID:0000000010046347
Perform preliminary check. Refer to
.
C1729 VEHICLE SPEED SIGNAL
WT-19
< DTC/CIRCUIT DIAGNOSIS >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
C1729 VEHICLE SPEED SIGNAL
Description
INFOID:0000000010046348
The vehicle speed signal is not being detected by the BCM.
DTC Logic
INFOID:0000000010046349
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF-DIAGNOSTIC RESULTS
1. On “SELECT DIAG MODE”, select the “SELF-DIAG RESULT” screen.
2. Check display contents on “SELF DIAG RESULT” screen.
Is the “CAN COMM CIRCUIT” displayed in the self-diagnosis display?
YES
>> Refer to
.
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000010046350
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
MALFUNCTION CODE NO. 52 (DTC C1729)
1.
CHECK SELF-DIAGNOSTIC RESULTS
1. On “SELECT DIAG MODE”, select the “SELF-DIAG RESULT” screen.
2. Check display contents on “SELF DIAG RESULT” screen.
Is the “CAN COMM CIRCUIT” displayed in the self-diagnosis display?
YES
>> Perform trouble diagnosis for CAN communication system. Refer to
NO
>> Check combination meter. Refer to
MWI-29, "CONSULT Function (METER/M&A)"
Special Repair Requirement
INFOID:0000000010046351
Perform preliminary check. Refer to
.
DTC
CONSULT
DTC detecting condition
C1729
VHCL SPEED SIG ERR
Vehicle speed signal is in error.
WT-20
< DTC/CIRCUIT DIAGNOSIS >
C1734 CONTROL UNIT
C1734 CONTROL UNIT
Description
INFOID:0000000010046352
An internal malfunction has been detected in the TPMS function of the BCM.
DTC Logic
INFOID:0000000010046353
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF-DIAGNOSTIC RESULTS
1. On “SELECT DIAG MODE”, select the “SELF-DIAG RESULT” screen.
2. Check display contents on “SELF DIAG RESULT” screen.
Is C1734 displayed in the self-diagnosis display?
YES
>> Refer to
.
NO
>> Inspection End.
Diagnosis Procedure
INFOID:0000000010046354
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
Regarding Wiring Diagram information, refer to
.
MALFUNCTION CODE NO. 53 (DTC C1734)
1.
SELF-DIAGNOSTIC RESULTS
1. On “SELECT DIAG” mode, select the “SELF-DIAG RESULT” screen for BCM.
2. Check display contents on “SELF-DIAG RESULT”.
Does self-diagnostic results indicate any DTC other than C1734?
YES
>> Perform trouble diagnosis for DTC. Refer to
NO
>> GO TO 2.
2.
CHECK BCM HARNESS CONNECTORS
Check BCM harness connectors for damage or loose connections.
Are the BCM harness connectors damaged or loose?
YES
>> Repair or replace damaged parts.
NO
>> GO TO 3.
3.
BCM POWER SUPPLY AND GROUND
DTC
CONSULT
DTC detecting condition
C1734
CONTROL UNIT
TPMS malfunction in BCM.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст