Nissan Maxima. Instruction — part 610
EXL-182
< SYSTEM DESCRIPTION >
[HALOGEN TYPE]
TURN SIGNAL AND HAZARD WARNING LAMPS
TURN SIGNAL AND HAZARD WARNING LAMPS
System Diagram
INFOID:0000000010051037
System Description
INFOID:0000000010051038
• BCM (Body Control Module) controls turn signal lamp (RH and LH) and hazard warning lamp operation.
• Combination meter operates turn signal indicator (RH and LH) according to CAN communication signals
from BCM.
Component Parts Location
INFOID:0000000010051039
ABLIA2705GB
1.
BCM M16, M17, M18, M19 (view with
combination meter removed)
2.
Combination switch (lighting and turn
signal switch) M28
3.
Combination meter M24
4.
Hazard switch M54
AWLIA1635ZZ
TURN SIGNAL AND HAZARD WARNING LAMPS
EXL-183
< SYSTEM DESCRIPTION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Component Description
INFOID:0000000010051040
TURN SIGNAL OPERATION
When the turn signal switch is in LH or RH position with the ignition switch in ON position, the BCM detects the
TURN RH or TURN LH ON request. The BCM outputs the flasher output signal to the respective turn signal
lamp. The BCM sends a turn signal indicator ON request through the CAN communication lines to the combi-
nation meter. The combination meter then activates the appropriate turn signal indicator and audible buzzer.
HAZARD LAMP OPERATION
When the hazard switch is in ON position, the BCM detects the hazard switch signal ON. The BCM outputs the
flasher output signal (right and left). The BCM sends a hazard indicator signal ON request through the CAN
communication lines to the combination meter. The combination meter then activates the hazard indicator and
audible buzzer.
REMOTE KEYLESS ENTRY OPERATION
The remote keyless entry receiver transmits Intelligent Key signal to BCM, then BCM controls hazard lamps.
.
EXL-184
< SYSTEM DESCRIPTION >
[HALOGEN TYPE]
PARKING, LICENSE PLATE AND TAIL LAMPS
PARKING, LICENSE PLATE AND TAIL LAMPS
System Diagram
INFOID:0000000010051041
System Description
INFOID:0000000010051042
• BCM (Body Control Module) controls parking, license plate and tail lamps operation.
• IPDM E/R (Intelligent Power Distribution Module Engine Room) operates parking, license plate and tail
lamps according to CAN communication signals from BCM.
Component Parts Location
INFOID:0000000010051043
ABLIA2684GB
1.
IPDM E/R E17, E18, E201
2.
BCM M16, M17, M18, M19 (view with
combination meter removed)
3.
Combination switch (lighting and turn
signal switch) M28
4.
Combination Meter M24
AWLIA1631ZZ
PARKING, LICENSE PLATE AND TAIL LAMPS
EXL-185
< SYSTEM DESCRIPTION >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Component Description
INFOID:0000000010051044
PARKING, LICENSE PLATE AND TAIL LAMPS OPERATION
When the lighting switch is in 1ST position, BCM detects the LIGHTING SWITCH 1ST POSITION ON. The
BCM sends a parking light ON request through the CAN communication lines to the IPDM E/R. The IPDM E/R
then activates the tail lamp relay which sends power to the parking and instrument illumination circuits.
EXTERIOR LAMP BATTERY SAVER CONTROL
With the combination switch (lighting and turn signal switch) in the 2nd position and the ignition switch is
turned from ON or ACC to OFF, the battery saver feature is activated.
Under this condition, the headlamps remain illuminated for 5 minutes unless the lighting switch position is
changed. If the lighting switch position is changed, then the headlamps are turned off.
This setting can be changed by CONSULT. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст