Nissan Juke F15. Instruction — part 760
FENDER PROTECTOR
EXT-31
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FENDER PROTECTOR
Exploded View
INFOID:0000000012199318
Removal and Installation
INFOID:0000000012199319
REMOVAL
1.
Fender protector
2.
U nut
3.
Air guide
4.
Screw grommet
: Vehicle front
JMKIB4235ZZ
EXT-32
< REMOVAL AND INSTALLATION >
FENDER PROTECTOR
1. Remove front fillet molding. Refer to
EXT-36, "FRONT FILLET MOLDING : Removal and Installation"
.
2. Remove air guide mounting bolts, and then remove air guide.
3. Remove front fender protector fixing screws and clips.
4. Remove front fender protector from wheel house.
INSTALLATION
Install in the reverse order of removal.
SILL COVER
EXT-33
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
SILL COVER
Exploded View
INFOID:0000000012199320
Removal and Installation
INFOID:0000000012199321
REMOVAL
1. Remove sill cover front end fixing screw (A).
1.
Screw grommet
2.
Screw grommet
3.
Sill cover
4.
Wind deflector
, , : Indicates that the part is connected at points with same symbol in actual vehicle.
JMKIA5581ZZ
JMKIA5565ZZ
EXT-34
< REMOVAL AND INSTALLATION >
SILL COVER
2. Remove sill cover rear end fixing screw (A).
3. Remove sill cover lower side fixing screws.
4. Fully open front door and rear door.
5. Remove fixing clips from sill cover back side with a remover tool
(A).
CAUTION:
Apply protective tape (B) on the body to protect the painted
surface from damage.
6. Remove sill cover form body side.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
When installing sill cover, check that clips are securely fitted in body panel holes, and then press clips
in.
JMKIA5566ZZ
: Clip
JMKIA5567ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст