Nissan Juke F15. Instruction — part 1343
TM-562
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
PRIMARY SPEED SENSOR
PRIMARY SPEED SENSOR
Exploded View
INFOID:0000000012201257
Removal and Installation
INFOID:0000000012201258
REMOVAL
1. Turn ignition switch OFF.
2. Remove fender protector (LH). Refer to
EXT-31, "Removal and Installation"
.
3. Disconnect primary speed sensor.
4. Remove mounting bolt (
) and remove primary speed sensor
(1) from transaxle assembly.
1.
Transaxle assembly
2.
Primary speed sensor
3.
O-ring
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: Apply CVT fluid
JSDIA6060GB
JSDIA6618ZZ
PRIMARY SPEED SENSOR
TM-563
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
5. Remove O-ring (1) from primary speed sensor.
INSTALLATION
Note the followings and installation is in the reverse order of removal.
CAUTION:
• Never reuse O-ring.
• Apply CVT fluid to the O-ring.
Inspection and Adjustment
INFOID:0000000012201259
INSPECTION AFTER INSTALLATION
Start the engine and check visually that there is no leakage of CVT fluid.
ADJUSTMENT AFTER INSTALLATION
If CVT fluid leaks during work, adjust the CVT fluid level. Refer to
.
JSDIA5199ZZ
TM-564
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
OUTPUT SPEED SENSOR
OUTPUT SPEED SENSOR
Exploded View
INFOID:0000000012201260
Removal and Installation
INFOID:0000000012201261
REMOVAL
1. Turn ignition switch OFF.
2. Disconnect output speed sensor connector.
3. Remove mounting bolt (
) and remove output speed sensor (1)
from transaxle assembly.
4. Remove O-ring (1) from output speed sensor.
1.
Transaxle assembly
2.
Output speed sensor
3.
O-ring
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: Apply CVT fluid
JSDIA5033GB
JSDIA5201ZZ
JSDIA5199ZZ
OUTPUT SPEED SENSOR
TM-565
< REMOVAL AND INSTALLATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
INSTALLATION
Note the followings and installation is in the reverse order of removal.
CAUTION:
• Never reuse O-ring.
• Apply CVT fluid to the O-ring.
Inspection and Adjustment
INFOID:0000000012201262
INSPECTION AFTER INSTALLATION
Start the engine and check visually that there is no leakage of CVT fluid.
ADJUSTMENT AFTER INSTALLATION
If CVT fluid leaks during work, adjust the CVT fluid level. Refer to
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст