Nissan Juke F15. Instruction — part 1390
WW-56
< REMOVAL AND INSTALLATION >
WIPER AND WASHER SWITCH
WIPER AND WASHER SWITCH
Exploded View
INFOID:0000000012197087
Wiper and washer switch is integrated in the combination switch. Refer to
REAR WIPER ARM
WW-57
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
REAR WIPER ARM
Exploded View
INFOID:0000000012197088
Removal and Installation
INFOID:0000000012197089
REMOVAL
1. Operate rear wiper to the auto stop position.
2. Remove rear wiper arm cover.
3. Remove rear wiper arm mounting nut.
4. Remove wiper arm from the vehicle.
INSTALLATION
1. Clean wiper arm mount as shown in the figure to prevent nut
from being loosened.
2. Operate the rear wiper motor to the auto stop position.
3. Adjust the rear wiper blade position. Refer to
.
4. Install the rear wiper arm by tightening the mounting nut.
5. Inject the washer fluid.
6. Operate the rear wiper to the auto stop position.
7. Check that the rear wiper blades stop at the specified position.
8. Install the rear wiper arm cover.
Adjustment
INFOID:0000000012197090
REAR WIPER BLADE POSITION ADJUSTMENT
1.
Rear wiper motor
2.
Rear wiper blade
3.
Rear wiper arm
4.
Rear wiper arm cover
5.
Rear wiper pivot seal
A
: Canada models only
: Pawl
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
JMLIA1503GB
SKIA0082J
WW-58
< REMOVAL AND INSTALLATION >
REAR WIPER ARM
Set the wiper blade top on the defrosting wire (A) (clearance between the end of back door glass and the top
of wiper blade center).
Standard clearance
1. Rear wiper blade
2. Back door window glass
3. Back door panel
A : Rear defogger wire print
L
: 67.5
± 7.5 mm (2.657 ± 0.295in)
JMLIA1170ZZ
REAR WIPER MOTOR
WW-59
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
REAR WIPER MOTOR
Exploded View
INFOID:0000000012197091
Removal and Installation
INFOID:0000000012197092
REMOVAL
1. Remove rear wiper arm. Refer to
WW-57, "Removal and Installation"
2. Remove back door lower finisher. Refer to
INT-39, "BACK DOOR SIDE FINISHER : Removal and Installa-
3. Disconnect rear wiper motor connector.
4. Remove rear wiper motor mounting bolts.
5. Remove rear wiper motor from the vehicle.
6. Remove the pivot seal.
INSTALLATION
Install in the reverse order of removal.
1.
Rear wiper motor
2.
Rear wiper blade
3.
Rear wiper arm
4.
Rear wiper arm cover
5.
Rear wiper pivot seal
A
: Canada models only
: Pawl
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
JMLIA1503GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст