Nissan Juke F15. Instruction — part 969
LU-6
< PREPARATION >
[MR FOR NISMO RS MODELS]
PREPARATION
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000012197468
The actual shapes oh TechMate tools may differ from those of special service tools illustrated here.
Commercial Service Tools
INFOID:0000000012197469
Tool number
(TechMate No.)
Tool name
Description
KV10111100
(J-37228)
Seat cutter
Removing oil pan (lower) etc.
ST25051001
(J-25695-1)
Oil pressure gauge
Measuring oil pressure
Maximum measuring range: 2,452 kPa (25
kg/cm
2
, 356 psi)
ST25052000
(J-25695-2)
Hose
Adapting oil pressure gauge to cylinder block
KV10115801
(J-38956)
Oil filter wrench
Removing and installing oil filter
a: 64.3 mm (2.531 in)
NT046
NT050
S-NT559
S-NT375
PREPARATION
LU-7
< PREPARATION >
[MR FOR NISMO RS MODELS]
C
D
E
F
G
H
I
J
K
L
M
A
LU
N
P
O
Tool name
Description
Deep socket
Removing and installing oil pressure sensor
27 mm (1.06 in)
Tube presser
Pressing the tube of liquid gasket
PBIC4066E
NT052
LU-8
< SYSTEM DESCRIPTION >
[MR FOR NISMO RS MODELS]
DESCRIPTION
SYSTEM DESCRIPTION
DESCRIPTION
Engine Lubrication System
INFOID:0000000012197470
Engine Lubrication System Schematic
INFOID:0000000012197471
JPBIA4342GB
JPBIA4343GB
ENGINE OIL
LU-9
< PERIODIC MAINTENANCE >
[MR FOR NISMO RS MODELS]
C
D
E
F
G
H
I
J
K
L
M
A
LU
N
P
O
PERIODIC MAINTENANCE
ENGINE OIL
Inspection
INFOID:0000000012197472
ENGINE OIL LEVEL
NOTE:
Before starting engine, put vehicle horizontally and check the engine oil level. If engine is already started, stop
it and allow 10 minutes before checking.
1. Pull out oil level gauge and wipe it clean.
2. Insert oil level gauge and check that the engine oil level is within
the range (A) shown in the figure.
3. If it is out of range, adjust it.
ENGINE OIL APPEARANCE
• Check engine oil for white turbidity or heavy contamination.
• If engine oil becomes turbid and white, it is highly probable that it is contaminated with engine coolant.
Repair or replace damaged parts.
ENGINE OIL LEAKAGE
Check for engine oil leakage around the following area.
• Oil cooler
• Oil temperature sensor
• Oil pan bolt
• Oil pan (upper and lower)
• Oil pan drain plug
• Oil pressure sensor
• Oil filter
• Valve timing control cover
• Valve timing control solenoid valve (intake and exhaust)
• Front cover
• Turbocharger
• Turbocharger oil tube (feed and return)
• Turbocharger oil hose
• Mating surface between high pressure fuel pump and camshaft bracket
• Mating surface between cylinder head and camshaft bracket
• Mating surface between cylinder block and cylinder head
• Mating surface between camshaft bracket and rocker cover
• Crankshaft oil seals (front and rear)
OIL PRESSURE CHECK
WARNING:
• Be careful not to get burned, as engine oil may be hot.
• When checking engine oil pressure, shift position should be “Parking” (CVT models) or “Neutral”
(M/T models), and apply parking brake securely.
1. Check engine oil level.
PBIC3309J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст