Nissan Juke F15. Instruction — part 209
DLK-16
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
SYSTEM (INTELLIGENT KEY SYSTEM)
After door is unlocked by door request switch operation and if 60 seconds or more passes without performing
the following operation, all doors are automatically locked. However, operation check function does not acti-
vate.
How To Change Auto Door Lock Operation Mode
Auto door lock operation mode can be changed using CONSULT.
DLK-28, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
LIST OF OPERATION RELATED PARTS
Parts marked with
× are the parts related to operation.
BACK DOOR OPEN FUNCTION
BACK DOOR OPEN FUNCTION : System Diagram
INFOID:0000000012196586
BACK DOOR OPEN FUNCTION : System Description
INFOID:0000000012196587
While back door open in the permitted state, back door opens when back door opener switch is pressed after
back door opener request switch is operated.
BACK DOOR OPEN
Operating condition
• Door switch is ON (door is open)
• Door is locked
• Push switch is pressed
Door lock function
In
tel
lig
en
t Ke
y
Re
mo
te
ke
yl
es
s en
try rec
e
ive
r
Do
or swi
tch
Doo
r re
qu
es
t s
w
itc
h
Do
or l
o
ck ac
tu
at
or
In
si
de
ke
y
an
ten
na
O
ut
sid
e ke
y ant
en
na
Int
el
lig
en
t Ke
y
wa
rni
ng
bu
zze
r
CAN co
mm
un
ic
at
io
n
sys
tem
BCM
Hazard warning
lamp
Pu
sh
-bu
tto
n i
gn
iti
on
swi
tch
Co
mb
in
at
ion
met
er
Door lock/unlock function
×
×
×
×
×
×
×
×
Hazard and buzzer reminder function
×
×
×
×
×
Selective unlock function
×
×
×
×
×
×
Auto door lock function
×
×
×
×
JMKIA6136GB
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-17
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
• When the BCM detects that back door opener switch is pressed, it starts the outside key antenna (rear
bumper) and inside key antenna and transmits the request signal to the Intelligent Key. Then, check that the
Intelligent Key is near the back door.
• If the Intelligent Key is within the outside key antenna detection area, it receives the request signal and
transmits the key ID signal to the BCM via remote keyless entry receiver.
• BCM receives the key ID signal and compares it with the registered key ID.
• BCM opens back door, simultaneously unlocks all doors.
NOTE:
In selective unlock mode, only back door opens. All doors do not unlock.
OPERATION CONDITION
If the following conditions are satisfied, the back door can be opened.
OUTSIDE KEY ANTENNA DETECTION AREA
The outside key antenna detection area of back door open function
is in the range of approximately 80 cm (31.50 in) surrounding the
back door opener switch (1). However, this operating range depends
on the ambient conditions.
LIST OF OPERATION RELATED PARTS
Parts marked with
× are the parts related to operation.
REMOTE KEYLESS ENTRY FUNCTION
Back door open function
Operation condition
Back door open operation
• Vehicle speed is less than 5 km/h (3 MPH)
• 3 seconds or more after BCM outputs all doors lock signal
• Intelligent Key is outside of vehicle
• Intelligent Key is within outside key antenna detection area
JMKIA5804ZZ
Door lock function
In
te
lli
ge
nt Key
Re
mo
te ke
yl
es
s ent
ry rec
eiv
er
Ba
ck
d
oo
r op
en
er
ac
tua
to
r
Do
or l
oc
k
ac
tua
to
r
In
si
de
ke
y a
n
ten
n
a
O
u
ts
id
e
k
ey
an
te
nna
CAN co
mm
un
ic
ati
on
sy
st
em
BCM
Ba
ck
d
oo
r op
en
er
swit
ch
Co
mb
in
ati
on
me
te
r
Back door open function
×
×
×
×
×
×
×
×
×
×
DLK-18
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
SYSTEM (INTELLIGENT KEY SYSTEM)
REMOTE KEYLESS ENTRY FUNCTION : System Diagram
INFOID:0000000012196588
REMOTE KEYLESS ENTRY FUNCTION : System Description
INFOID:0000000012196589
The Intelligent Key has the same functions as the remote control entry system. Therefore, it can be used in the
same manner as the remote controller by operating the door lock/unlock button.
OPERATION
Remote keyless entry system controls operation of the following items.
• Door lock/unlock
• Selective unlock function
• Hazard reminder function
• Auto door lock
OPERATION AREA
To check that the Intelligent Key works normally, use within 1 m (3 ft) range of each doors, however the opera-
ble range may differ according to surroundings.
DOOR LOCK/UNLOCK FUNCTION
• When door lock/unlock button of the Intelligent Key is pressed, lock signal or unlock signal transmitted from
Intelligent Key to BCM via remote keyless entry receiver.
• BCM receives the signal and compares it with the registered key ID to the vehicle.
• When BCM receives the door lock/unlock signal, it operates all door lock actuators and the hazard lamp
(lock: 2 times, unlock: 1 time) and horn chirp signal to IPDM E/R at the same time as a reminder.
• IPDM E/R honks horn (lock: 1 times) as a reminder
OPERATION CONDITION
If the following condition are satisfied, remote keyless entry operation is performed when the Intelligent Key is
operated.
SELECTIVE UNLOCK FUNCTION
• When an LOCK signal is transmitted from Intelligent Key, all doors are locked.
• When an UNLOCK signal is transmitted from Intelligent Key once, driver side door is unlocked.
• Then, if an UNLOCK signal is transmitted from Intelligent Key again within 60 seconds, all other doors are
unlocked.
How To Change Selective Unlock Operation Mode
Selective unlock operation mode can be changed using CONSULT.
JMKIA6159GB
Remote controller operation
Operation condition
Lock
• Panic alarm is not activated
• P position warning is not activated
Unlock
Panic alarm is not activated
SYSTEM (INTELLIGENT KEY SYSTEM)
DLK-19
< SYSTEM DESCRIPTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DLK-26, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
.
HAZARD AND HORN REMINDER FUNCTION
When doors are locked or unlocked by Intelligent Key, BCM blinks hazard warning lamps as a reminder and
transmits horn chirp signal to IPDM E/R. IPDM E/R sounds horn as a reminder.
The hazard and horn reminder has a horn chirp mode (C mode) and a non-horn chirp mode (S mode).
Operating Function of Hazard and Horn Reminder
Hazard and horn reminder does not operate if ignition switch ON position.
How to change hazard and horn reminder mode
With CONSULT
DLK-28, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
Without CONSULT
When LOCK and UNLOCK signals are sent from the Intelligent Key for more than 2 seconds at the same time,
the hazard and horn reminder mode is changed and hazard warning lamp blinks and horn sounds as per the
following items:
AUTO DOOR LOCK FUNCTION
After door is unlocked by Intelligent Key button operation and if 60 seconds or more passes without performing
the following operation, all doors are locked. However, operation check function does not activate.
How To Change Auto Door Lock Operation Mode
Auto door lock operation mode can be changed using CONSULT.
DLK-28, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
LIST OF OPERATION RELATED PARTS
Parts marked with
× are the parts related to operation.
C mode
S mode
Intelligent Key operation
Lock
Unlock
Back door
open
Lock
Unlock
Back door
open
Hazard warning lamp blinks
Twice
Once
—
Twice
—
—
Horn sound
Once
—
—
—
—
—
JMKIA6362GB
Operating condition
• Door switch is ON (door is open)
• Door is locked
• Push switch is pressed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст