Nissan Juke F15. Instruction — part 58
AV-218
< WIRING DIAGRAM >
[INTEGRATED CONTROL SYSTEM]
INTEGRATED CONTROL SYSTEM
JRNWF0755GB
AV
INTEGRATED CONTROL SYSTEM
AV-219
< WIRING DIAGRAM >
[INTEGRATED CONTROL SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
JRNWF0756GB
AV-220
< BASIC INSPECTION >
[INTEGRATED CONTROL SYSTEM]
DIAGNOSIS AND REPAIR WORK FLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000012202622
DESCRIPTION OF TROUBLE DIAGNOSIS FLOWCHART
DETAILS OF TROUBLE DIAGNOSIS FLOWCHART
1.
OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under
which the malfunction occurs.
>> GO TO 2.
2.
CHECK SYMPTOM
• Check the symptom based on the information obtained from the customer.
• Check if any other malfunctions are present.
>> GO TO 3.
3.
CONSULT SELF-DIAGNOSIS
1. Perform “MULTI DISPLAY” “self diagnosis” by connecting CONSULT.
2. When DTC is detected, follow the instructions below:
-
Record DTC and Freeze Frame Data.
NOTE:
If “CAN COM CIRC [U1000]” is displayed, start the diagnosis from the CAN communication system. Refer to
.
Is any DTC No. displayed?
YES
>> GO TO 4.
NO
>> GO TO 5.
4.
DTC/SYSTEM DIAGNOSIS
JSNIA4500GB
AV
DIAGNOSIS AND REPAIR WORK FLOW
AV-221
< BASIC INSPECTION >
[INTEGRATED CONTROL SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
1. Perform a DTC/system diagnosis and repair or replace any malfunctioning part.
2. When DTC is detected, follow the instructions below:
-
Record DTC and Freeze Frame Data.
>> GO TO 6.
5.
PERFORM DIAGNOSIS BY SYMPTOM
Perform a diagnosis by symptom and repair or replace any malfunctioning part.
>> GO TO 6.
6.
FINAL CHECK
Check that the multi display unit functions normally.
Does it operate normally?
YES
>> End of trouble diagnosis
NO
>> GO TO 2.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст