Nissan Juke F15. Instruction — part 1174
B0096 B-PILLAR SATELLITE SENSOR
SRC-61
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
NO-2 >> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000012199613
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3
minutes or more. (To discharge backup capacitor.)
• Never use unspecified tester or other measuring device.
1.
CHECK DTC
Perform each inspection according to the displayed DTC.
Which DTC is displayed?
[B0096–86]>>GO TO 4.
Other than the above>>GO TO 2.
2.
CHECK HARNESS CONNECTOR
Check the harness connector for disconnection, looseness or damage.
Is the inspection result normal?
YES
>> GO TO 3.
NO–1 >> Damage: Replace malfunctioning harness and connector.
NO–2 >> Disconnection or looseness: Securely lock the connector.
3.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace malfunctioning harness and connector.
4.
REPLACE SATELLITE SENSOR RH
1. Replace satellite sensor RH. Refer to
SR-26, "Removal and Installation"
2. Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 5.
NO
>> INSPECTION END
5.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
1. Replace air bag diagnosis sensor unit. Refer to
SR-29, "Removal and Installation"
2. Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
SRC-62
< DTC/CIRCUIT DIAGNOSIS >
B0098 FRONT DOOR SATELLITE SENSOR RH
B0098 FRONT DOOR SATELLITE SENSOR RH
DTC Description
INFOID:0000000012199614
DTC DETECTION LOGIC
POSSIBLE CAUSE
[B0098–11]
• Connection malfunction or short circuit to ground of harness and connector
• Internal malfunction of front door satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit
[B0098–23, B0098–24, B0098–25, B0098–28]
• Internal malfunction of front door satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit
[B0098–81, B0098–93]
• Connection malfunction of harness or connector
• Internal malfunction of front door satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit
[B0098–86]
• Air bag diagnosis sensor unit and front door satellite sensor RH is different from the part specified
[B0098–88]
• Connection malfunction or open circuit of harness and connector
• Internal malfunction of front door satellite sensor RH
• Internal malfunction of air bag diagnosis sensor unit
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF-DIAG RESULT
With CONSULT
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.
Without CONSULT
1. Turn ignition switch ON.
2. Check the air bag warning lamp status. Refer to
SRC-10, "On Board Diagnosis Function"
NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.
Is malfunctioning part detected?
YES
>> Refer to
NO-1 >> To check malfunction symptom before repair: Refer to
GI-45, "Intermittent Incident"
.
DTC
CONSULT screen items
(Trouble diagnosis content)
DTC detecting condition
B0098–11
DOOR SATEL SENS RH
[Right Frontal Restraints
Sensor 3 (Subfault)]
[GND-SHORT]
Front door satellite sensor RH circuit is shorted to ground
B0098–23
[LOWER LIMIT ERR]
Lower limit value malfunction of front door satellite sensor RH
B0098–24
[UPPER LIMIT ERR]
Upper limit value malfunction of front door satellite sensor RH
B0098–25
[SELF-DIAG ERR]
Diagnosis malfunction of front door satellite sensor RH
B0098–28
[OFFSET ERR]
Offset malfunction of front door satellite sensor RH
B0098–81
[COMM ERR]
Communication malfunction of front door satellite sensor RH
B0098–86
[UNMATCH]
Front door satellite sensor RH is out of the specified specification
B0098–88
[OPEN]
Front door satellite sensor RH circuit is open
B0098–93
[RESET]
Reset malfunction of front door satellite sensor RH
B0098 FRONT DOOR SATELLITE SENSOR RH
SRC-63
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
NO-2 >> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000012199615
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3
minutes or more. (To discharge backup capacitor.)
• Never use unspecified tester or other measuring device.
1.
CHECK DTC
Perform each inspection according to the displayed DTC.
Which DTC is displayed?
[B0098–86] >> GO TO 4.
Other than the above >> GO TO 2.
2.
CHECK HARNESS CONNECTOR
Check the harness connector.
Is the inspection result normal?
YES
>> GO TO 3.
NO-1 >> Damage: Replace malfunctioning harness and connector.
NO-2 >> Disconnection or looseness: Securely lock the connector.
3.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace malfunctioning harness and connector.
4.
REPLACE FRONT DOOR SATELLITE SENSOR RH
1. Replace front door satellite sensor RH. Refer to
SR-26, "Removal and Installation"
.
2. Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 5.
NO
>> INSPECTION END
5.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
1. Replace air bag diagnosis sensor unit. Refer to
SR-29, "Removal and Installation"
2. Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
SRC-64
< DTC/CIRCUIT DIAGNOSIS >
B00A0 OCCUPANT DETECTION SYSTEM CONTROL UNIT
B00A0 OCCUPANT DETECTION SYSTEM CONTROL UNIT
DTC Description
INFOID:0000000012199616
DTC DETECTION LOGIC
POSSIBLE CAUSE
OCCUPANT SENS
• [B00A0–00]
- Connection malfunction or short circuit to power supply of harness or connector
- Internal malfunction of occupant detection sensor
- Internal malfunction of air bag diagnosis sensor unit
• [B00A0–02, B00A0–09]
- Connection malfunction of harness and connector
- Internal malfunction of occupant detection sensor
- Internal malfunction of air bag diagnosis sensor unit
OCCUPANT SENS C/U
• [B00A0–04, B00A0–83, B00A0–86, B00A0–87, B00A0–88, B00A0–8F]
- Connection malfunction or open circuit of harness and connector
- Internal malfunction of occupant detection sensor control unit
- Internal malfunction of air bag diagnosis sensor unit
• [B00A0–93]
- Connection malfunction of harness and connector
- Internal malfunction of occupant detection sensor control unit
- Internal malfunction of air bag diagnosis sensor unit
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF-DIAG RESULT
DTC
CONSULT screen items
(Trouble diagnosis content)
DTC detecting condition
B00A0–00
OCCUPANT SENS
[Occupant Classification
System (Subfault)]
[ABNORMAL VOLTAGE]
Power supply malfunction of occupant detection sensor
B00A0–02
[UNIT MALFUNC]
Malfunction of occupant detection sensor
B00A0–09
[UNIT MALFUNC]
Malfunction of occupant detection sensor
B00A0–04
OCCUPANT SENS C/U
[Occupant Classification
System (Subfault)]
[UNIT MALFUNC]
Malfunction of occupant detection sensor control unit
B00A0–83
[COMM ERR]
• Communication malfunction of occupant detection sensor con-
trol unit
• Communication blank of occupant detection sensor control
unit
B00A0–86
[COMM ERR]
• Communication malfunction of occupant detection sensor con-
trol unit
• Communication blank of occupant detection sensor control
unit
B00A0–87
[COMM ERR]
• Communication malfunction of occupant detection sensor con-
trol unit
• Communication blank of occupant detection sensor control
unit
B00A0–88
[COMM ERR]
• Communication malfunction of occupant detection sensor con-
trol unit
• Communication blank of occupant detection sensor control
unit
B00A0–8F
[UNDEFINED]
Undefined status of occupant detection sensor control unit
B00A0–93
[RESET]
Reset malfunction of occupant detection sensor control unit
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст