Nissan Juke F15. Instruction — part 139
WHEEL SENSOR
BRC-147
< REMOVAL AND INSTALLATION >
[WITH VDC]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
REMOVAL AND INSTALLATION
WHEEL SENSOR
FRONT WHEEL SENSOR
FRONT WHEEL SENSOR : Exploded View
INFOID:0000000012199753
NOTE:
Front RH wheel sensor is symmetrically opposite of LH.
FRONT WHEEL SENSOR : Removal and Installation
INFOID:0000000012199754
REMOVAL
1. Remove tires.
2. Remove the fender protector (front). Refer to
EXT-31, "Removal and Installation"
3. Remove front wheel sensor from steering knuckle.
CAUTION:
Never rotate and never pull front wheel sensor as much as possible, when pulling out.
4. Remove front wheel sensor harness from the vehicle.
CAUTION:
Never twist or pull front wheel sensor harness, when removing.
INSTALLATION
Note the following, and install in the reverse order of the removal.
1.
Front LH wheel sensor
2.
Front LH wheel sensor harness con-
nector
: Vehicle front
: N·m (kg-m, in-lb)
JPFIC0191GB
BRC-148
< REMOVAL AND INSTALLATION >
[WITH VDC]
WHEEL SENSOR
• Check that there is no foreign material like iron powder or damage on inner surface of front wheel sensor
mounting hole of steering knuckle and sensor rotor. Install after cleaning when there are foreign material like
iron powder, or replace when there is a malfunction.
• Never twist front wheel sensor harness when installing front wheel
sensor. Check that grommet (2) is fully inserted to bracket (1).
Check that front wheel sensor harness is not twisted after installa-
tion.
REAR WHEEL SENSOR
REAR WHEEL SENSOR : Exploded View
INFOID:0000000012199755
2WD
Left side
JPFIC0209ZZ
JPFIC0192GB
1.
Rear LH wheel sensor
2.
Rear LH wheel sensor harness con-
nector
: Vehicle front
: N·m (kg-m, in-lb)
WHEEL SENSOR
BRC-149
< REMOVAL AND INSTALLATION >
[WITH VDC]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
Right side
AWD
JPFIC0218GB
1.
Rear RH wheel sensor
2.
Rear RH wheel sensor harness con-
nector
: Vehicle front
: N·m (kg-m, in-lb)
BRC-150
< REMOVAL AND INSTALLATION >
[WITH VDC]
WHEEL SENSOR
NOTE:
Rear RH wheel sensor is symmetrically opposite of LH.
REAR WHEEL SENSOR : Removal and Installation
INFOID:0000000012199756
REMOVAL
1. Remove rear wheel sensor from wheel hub and bearing assembly (2WD).
CAUTION:
Never rotate or pull rear wheel sensor as much as possible, when pulling out.
2. Remove rear wheel sensor from axle housing (AWD).
CAUTION:
Never rotate or pull rear wheel sensor as much as possible, when pulling out.
3. Remove rear wheel sensor harness from the vehicle.
CAUTION:
Never twist and never pull rear wheel sensor harness, when removing.
INSTALLATION
Note the following, and install in the reverse order of the removal.
• Check that there is no foreign material like iron powder or damage on inner surface of rear wheel sensor
mounting hole of wheel hub and bearing assembly and sensor rotor. Install after cleaning when there are for-
eign material like iron powder, or replace when there is a malfunction.
1.
Rear LH wheel sensor
2.
Rear LH wheel sensor harness con-
nector
: Vehicle front
: N·m (kg-m, in-lb)
JSFIA0525GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст