Honda Clarity Plug-in Hybrid (2018 year). Manual — part 8
112
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the parking button is pressed while
the vehicle is moving.
●
Appears if you change the gear position to
(
R while
the vehicle is moving forward, or to
(
D while the
vehicle is reversing.
●
Make sure that the vehicle comes to a stop before
operating the select button.
●
Appears if there is a problem with the electric system.
●
Appears when you set the power mode to OFF while
driving.
●
Immediately stop in a safe place and set the parking
brake.
●
Resume driving if the message disappears.
●
If there is a problem with the transmission system, the
transmission system indicator comes on.
2 Transmission System Indicator P. 92
●
Appears when the vehicle is stopped with the driver’s
seat belt unfastened and there is a chance that the
vehicle may roll unintentionally.
●
Press the
(
P button before releasing the brake pedal
when idling, parking, or exiting the vehicle.
2 Shift Operation P. 384
●
Appears for a few seconds if you have not pressed
the
(
N button long enough to initiate Neutral-Hold
mode.
2 If you want to keep the transmission in
(
N
position [car wash mode] P. 386
●
Appears when you press and hold
(
N button for
more than 2 seconds.
●
Disappears when you set the gear position to other than
(
N.
2 If you want to keep the transmission in
(
N
position [car wash mode] P. 386
113
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears if any door or the trunk is not completely
closed.
●
Appears if any door or the trunk is opened while
driving. The beeper sounds.
●
Goes off when all doors and the trunk are closed.
●
Appears when there is a problem with the
headlights.
●
Appears while driving - The headlights may not be
on. When conditions allow you to drive safely, have
your vehicle checked by an authorized Honda Clarity
Plug-In Hybrid dealer as soon as possible.
●
Appears while you are customizing the settings and
the shift lever is moved out of
(
P.
●
Appears if you try to go to vehicle settings from the
driver information interface while the audio/
information screen shows the same menu.
●
Select either display to customize a setting. You cannot
have vehicle settings displayed on the driver information
interface and audio/information screen simultaneously.
●
Appears if you try to go to Charge Timer Setup
while the time is incorrect.
114
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears if the automatic brake hold is automatically
canceled while it is in operation.
●
The beeper may sound.
●
Immediately depress the brake pedal.
●
Appears when the automatic brake hold system is
turned off.
●
Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.
●
Fasten the driver’s seat belt.
●
Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.
●
Press the automatic brake hold button with the brake
pedal depressed.
●
Appears when the parking brake is applied
automatically while it is in operation.
2 Automatic Brake Hold P. 435
2 Parking Brake P. 431
●
Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.
●
Appears while driving - Press the electric parking
brake switch with the brake pedal depressed.
115
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Flashes when the system senses a likely collision with
a vehicle in front of you.
●
Take the appropriate means to prevent a collision (apply
the brakes, change lanes, etc.)
2 Collision Mitigation Braking System
P. 439
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when ACC with LSF has been automatically
canceled.
●
You can resume the set speed after the condition that
caused ACC with LSF to cancel improves. Press the
RES/+ or −/SET switch up.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when the distance between your vehicle
and the vehicle ahead of you is too close while ACC
with LSF is in operation.
●
ACC with LSF has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when pressing the RES/+ or −/SET switch
down while the distance between your vehicle and
the vehicle ahead of you is too close.
●
ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when pressing the RES/+ or −/SET switch
down while the driver’s seat belt is unfastened.
●
ACC with LSF cannot be set.
116
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when pressing the RES/+ or −/SET switch
down while the transmission is not in
(
D.
●
ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when the vehicle is stopped on a very steep
slope while ACC with LSF is in operation.
●
ACC with LSF has been automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when pressing the RES/+ or −/SET switch
down while the vehicle is stopped on a very steep
slope.
●
ACC with LSF cannot be set.
117
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears just before the ACC with LSF is
automatically canceled when you are descending a
long hill etc (The following interval is automatically
set to extra long).
●
Appears when the ACC with LSF has been
automatically canceled.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when you are descending a long hill etc and
you press the RES/+ or -/SET switch.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears if the VSA® or traction control function
operates while ACC is in operation.
●
ACC has been automatically canceled.
118
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the speed of the vehicle is too high for
you to set ACC with LSF.
●
Reduce the speed, then set ACC with LSF.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when ACC with LSF is cancelled due to
excessive vehicle speed.
●
Reduce the speed, then reset ACC with LSF.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when the vehicle ahead of you resumes
driving, after your vehicle has been stopped
automatically by ACC with LSF.
●
Press the RES/+ or −/SET switch or depress the
accelerator pedal to resume.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when pressing the RES/+ or −/SET switch
down while the parking brake is applied.
●
ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears when pressing the RES/+ or −/SET switch
down while the vehicle is moving and the brake
pedal is depressed.
●
ACC with LSF cannot be set.
2 Adaptive Cruise Control (ACC) with Low Speed
●
Appears if ACC with LSF is canceled while your
vehicle is automatically stopped by ACC with LSF.
●
Immediately depress the brake pedal.
119
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the vehicle is driving out of a detected
lane. The steering wheel vibrates rapidly.
●
Appears when the vehicle is driving out of a detected
lane.
- The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected lane.
- The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected lane. The system
also steers the vehicle to help you remain within
your driving lane.
●
Keep the vehicle within the lane you are driving.
2 Road Departure Mitigation (RDM) System P. 396
2 Lane Keeping Assist System (LKAS) P. 415
●
You can change the setting for the road departure
mitigation system. Narrow, Normal, Wide, and
Warning Only can be selected.
●
Blinks when you fail to steer the vehicle. The beeper
sounds simultaneously.
●
Operate the steering wheel to resume the LKAS.
●
Appears when the vehicle is likely to drive out of a
detected lane.
- The system steers the vehicle to help you remain
within your driving lane.
—
Lane Keeping Assist System (LKAS)
Road Departure Mitigation (RDM) System
When you selected Warning Only
When you selected Narrow, Normal or Wide
Road Departure Mitigation System
When you selected Narrow
120
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
●
Appears when the LKAS is in operation, or the LKAS
button is pressed, but there is a problem with a
system related to the LKAS. The LKAS cancels
automatically. The beeper sounds simultaneously.
●
If the VSA®, ABS, or brake system indicator or another
indicator comes on, take appropriate action.
2 Indicators P. 86
●
Appears when the temperature inside the camera is
too high.
●
Use the climate control system to cool down the
camera.
●
Goes off - The camera has been cooled down. Pressing
the LKAS button can resume the system.
2 Adaptive Cruise Control (ACC) with Low Speed
2 Lane Keeping Assist System (LKAS) P. 415
2 Front Sensor Camera P. 394
●
Appears when the area around the camera is
blocked by dirt, mud, etc. Stop your vehicle in a safe
place, and wipe it off with a soft cloth.
●
May appear when driving in bad weather (rain,
snow, fog, etc.).
●
Have your vehicle checked by an authorized Honda
Clarity Plug-In Hybrid dealer if the message does not
disappear, even after you clean the area around the
camera.
2 Adaptive Cruise Control (ACC) with Low Speed
2 Lane Keeping Assist System (LKAS) P. 415
2 Front Sensor Camera P. 394
121
Continued
In
strum
e
nt Pa
nel
Gauges and Driver Information Interface
Gauges
Gauges include the speedometer, fuel gauge, POWER/CHARGE gauge, high
voltage battery charge level gauge, and related indicators. They are displayed when
the power mode is in ON.
Displays your driving speed in mph or km/h.
Displays the approximate amount of fuel left in the fuel tank.
Shows the estimated distance you can travel
on the remaining power and fuel. This
estimate is based on the fuel economy and
energy consumption of your previous trips
and the remaining high voltage battery charge
level.
■
Speedometer
■
Fuel Gauge
■
Range
1
Press the
(display/information) button
repeatedly until the
icon is shown on the driver
information interface. Press ENTER, then press and
hold it again. The speedometer reading and the
displayed measurements will switch between mph
and km/h.
1
NOTICE
You should refuel when the needle approaches
.
Running out of fuel can cause the engine to misfire,
damaging the catalytic converter.
The actual amount of remaining fuel may differ from
the fuel gauge reading.
E
uu
Gauges and Driver Information Interface
u
Gauges
122
In
strum
e
nt Pa
nel
■
Electric motor
The degree to which the electric motor is being powered is displayed by the readings
on the POWER side.
When you depress the accelerator pedal, the white needle on the gauge moves. The
curved blue line on the gauge shows the range within which only the electric motor
provides propulsion to the wheels. The length of this line varies depending on the
drive mode and the remaining power of the High Voltage battery. When the white
needle exceeds the curved blue line, the engine starts and the curved blue line turns
white.
■
Battery charge in progress
The degree to which the High Voltage battery is being charged is displayed by the
readings on the CHARGE side when coasting or during deceleration.
■
POWER/CHARGE Gauge
1
The power output of the electric motor is restricted
when the high voltage battery charge level is running
low (one segment on the gauge).
If you accelerate aggressively, the engine may start
even though the white needle has not exceeded the
curved blue line.
Curved Blue Line
White Needle
123
uu
Gauges and Driver Information Interface
u
Gauges
In
strum
e
nt Pa
nel
Shows the remaining high voltage battery charge level.
■
High Voltage Battery Charge Level Gauge
1
High Voltage Battery Charge Level Gauge
When the number of bars displayed on the High
Voltage Battery Charge Level Gauge becomes one,
assist by the high-voltage battery is limited and the
vehicle output is lowered.
The high voltage battery charge level may decrease
under the following conditions:
•
When the 12-volt battery has been replaced.
•
When the 12-volt battery has been disconnected.
•
When the high voltage battery control system
corrects its reading.
The charge level reading will be corrected
automatically while driving.
Changes in the temperature of the high voltage
battery can increase or decrease the battery’s
charging capacity. If temperature changes cause the
battery’s capacity to change, the number of
indicators in the battery charge level gauge may also
change, even if the amount of charge remains the
same.
124
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
Driver Information Interface
The driver information interface shows the odometer, trip meter, outside
temperature indicator, and other gauges. It also displays important messages such
as warnings and other helpful information.
Press the
(display/information) button and press
or
to change the
display. Press ENTER to see detailed information.
*1:You can add the content using the audio/information screen.
■
Switching the Display
1
You can edit, add, or delete the meter contents using
the audio/information screen.
2 Customizing the Meter P. 219
Press ,
,
or .
Speed Unit &
Disp OFF
ECO Drive
Display
Power Flow
Monitor
Customize
Warning
Messages
Audio
Average Speed/
Elapsed Time
Average/
Instant Fuel
Economy
Range
Maintenance
Minder
TM
Average Fuel
Economy
Records
Phone
Press ENTER.
(Display/
Information) Button
*1
Navigation &
Compass
*1
125
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
Press the TRIP button to change the display.
Odometer
Trip A
Trip B
Outside temperature
TRIP Button
TRIP
TRIP
TRIP
uu
Gauges and Driver Information Interface
u
Driver Information Interface
126
In
strum
e
nt Pa
nel
Shows the total number of miles or kilometers that your vehicle has accumulated.
Shows the total number of miles or kilometers driven since the last reset. Meters A
and B can be used to measure two separate trips.
■
Resetting a trip meter
To reset a trip meter, display it, then press and hold the TRIP button. The trip meter
is reset to 0.0.
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■
Adjusting the outside temperature display
Adjust the temperature reading up to ± 5°F or 3°C if the temperature reading seems
incorrect.
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.
The display is updated at set intervals. When a trip meter is reset, the average fuel
economy is also reset.
■
Odometer
■
Trip Meter
■
Outside Temperature
■
Average Fuel Economy
1
Switch between trip meter A and trip meter B by
pressing the TRIP button.
1
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
Use the audio/information screen’s customized
features to correct the temperature.
2 Customized Features P. 306
1
You can change when to reset the average fuel
economy.
2 Customized Features P. 306
Continued
127
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
Shows the time elapsed since Trip A or Trip B was reset.
Shows the average speed in mph or km/h since Trip A or Trip B was reset.
Shows you turn-by-turn driving directions to your destination linked with the
navigation system.
2 Refer to the Navigation System Manual
■
Instant Fuel Economy
■
Elapsed Time
■
Average Speed
■
Turn-by-Turn Directions
1
You can change when to reset the elapsed time.
2 Customized Features P. 306
1
You can change when to reset the average speed.
2 Customized Features P. 306
1
The driver information interface shows a compass
when the route guidance is not used.
You can select whether the turn-by-turn display
comes on or not during the route guidance.
2 Customized Features P. 306
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст