Lexus GS300/400 (2000 year). Service manual — part 223
ST055–01
ST–16
–
STARTING (2JZ–GE)
STARTER
1634
INSTALLATION
Installation is in the reverse order of removal. (See page
B00923
Starter
Relay
ST056–01
P07170
Ohmmeter
Continuity
No Continuity
1
3
2
5
Ohmmeter
P07171
Ohmmeter
Continuity
1
3
2
5
Battery
–
STARTING (2JZ–GE)
STARTER RELAY
ST–17
1635
STARTER RELAY
INSPECTION
1.
REMOVE RELAY BOX COVER
2.
REMOVE STARTER RELAY
3.
INSPECT STARTER RELAY
(a)
Inspect the relay continuity.
(1)
Using an ohmmeter, check that there is continuity
between terminals 1 and 2.
If there is no continuity, replace the relay.
(2)
Check that there is no continuity between terminals
3 and 5.
If there is continuity, replace the relay.
(b)
Inspect the relay operation.
(1)
Apply battery positive voltage across terminals 1
and 2.
(2)
Using an ohmmeter, check that there is continuity
between terminals 3 and 5.
If there is no continuity, replace the relay.
4.
REINSTALL STARTER RELAY
5.
REINSTALL RELAY BOX COVER
ST04Y–01
B02010
Clamp Bracket
Starter
Starter Connector
Starter Wire
Engine Wire
ST–2
–
STARTING (2JZ–GE)
STARTER
1620
STARTER
COMPONENTS
B01640
Starter Clutch Assembly
Magnetic Switch Assembly
Return Spring
Starter Housing
Idler Gear
Steel Ball
O–Ring
Armature
Front Bearing
Rear Bearing
Field Frame (Field Coil)
Dust Protector
Non–reusable part
Brush Holder
O–Ring
End Cover
Bearing
B01641
Terminal C Kit Part
Terminal 30 Kit Part
Non–reusable part
Terminal Insulator
Wave Washer
Terminal Insulator
O–Ring
Contact Plate
Terminal
Bolt
17 (170, 12)
End Cover
Gasket
Plunger
Lead
Terminal
O–Ring
Packing
Terminal Insulator
Wave Washer
17 (170, 12)
Terminal Bolt
Contact Plate
Terminal Insulator
Insulation Paper
N·m (kgf·cm, ft·lbf) : Specified torque
Magnetic Switch Assembly
–
STARTING (2JZ–GE)
STARTER
ST–3
1621
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст