Lexus GS300/400 (2000 year). Service manual — part 261
SA0RM–01
F02337
HID Type Headlight:
Height Control Sensor Link
PS Gear
Assembly
Pressure Feed
and Return Tubes
Shock Absorber
Bracket
No.2 Lower Suspension Arm
Strut Bar Bracket
Brake Caliper
Stabilizer Bar Link
No.1 Lower Suspension
Arm
Engine Under Cover
Disc
Clip
Gasket
5.4 (55, 48 in.·lbf)
59 (600, 44)
118 (1,200, 87)
: Specified torque
Non–reusable part
N·m (kgf·cm, ft·lbf)
87 (890, 64)
172 (1,755, 127)
Cotter Pin
55 (560, 43)
164 (1,690, 122)
162 (1,650, 119)
58 (590, 43)
152 (1,550, 112)
113 (1,150, 83)
35 (360, 26)
65 (660, 48)
Engine Under Cover
Rear RH
Engine Under Cover
Rear LH
157 (1,600, 116)
–
SUSPENSION AND AXLE
FRONT LOWER SUSPENSION ARM
SA–29
2029
FRONT LOWER SUSPENSION ARM
COMPONENTS
SA0RN–01
F02311
F02312
SST
F02317
F02318
SA–30
–
SUSPENSION AND AXLE
FRONT LOWER SUSPENSION ARM
2030
REMOVAL
1.
REMOVE FRONT WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
2.
REMOVE ENGINE UNDER COVERS
3.
REMOVE BRAKE CALIPER
(a)
Remove the 2 bolts and caliper.
Torque: 118 N·m (1,200 kgf·cm, 87 ft·lbf)
(b)
Support the brake caliper securely.
(c)
Remove the disc.
4.
DISCONNECT TIE ROD END
(a)
Remove the clip and nut.
Torque: 87 N·m (890 kgf·cm, 64 ft·lbf)
(b)
Using SST, disconnect the tie rod end from the steering
knuckle.
SST
09610–20012
5.
HID TYPE HEADLIGHT:
DISCONNECT HEIGHT CONTROL SENSOR LINK
FROM SHOCK ABSORBER BRACKET
Remove the nut and disconnect the height control sensor link
from the shock absorber bracket.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
6.
REMOVE STABILIZER BAR LINK
(a)
Remove the bolt and nut, disconnect the stabilizer bar link
from the stabilizer bar.
Torque: 55 N·m (560 kgf·cm, 43 ft·lbf)
(b)
Remove the nut and stabilizer bar link.
Torque: 113 N·m (1,150 kgf·cm, 83 ft·lbf)
F02395
F02321
R05835
SST
F03425
A
B
A
F02322
Matchmarks
–
SUSPENSION AND AXLE
FRONT LOWER SUSPENSION ARM
SA–31
2031
7.
DISCONNECT SHOCK ABSORBER
Remove the bolt and nut, disconnect the shock absorber from
the shock absorber bracket.
Torque: 157 N·m (1,600 kgf·cm, 116 ft·lbf)
8.
LOOSEN NO.1 AND NO.2 LOWER SUSPENSION ARM
SET BOLTS
Torque: 164 N·m (1,690 kgf·cm, 122 ft·lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the bolts.
9.
DISCONNECT NO.2 LOWER SUSPENSION ARM
(a)
Remove the cotter pin and nuts.
Torque: 162 N·m (1,650 kgf·cm, 119 ft·lbf)
(b)
Using SST, disconnect the No.2 lower suspension arm
from the lower ball joint.
SST
09628–62011
10.
REMOVE STEERING GEAR ASSEMBLY
(See page
11.
REMOVE STRUT BAR BRACKET
Remove the nut, 2 bolts and strut bar bracket.
Torque:
A: 58 N·m (590 kgf·cm, 43 ft·lbf)
B: 152 N·m (1,550 kgf·cm, 112 ft·lbf)
12.
REMOVE LOWER SUSPENSION ARM ASSEMBLY
(a)
Place matchmarks on the camber adjusting cam and sus-
pension crossmember.
(b)
Remove the bolt, nut and lower suspension arm assem-
bly.
Torque: 172 N·m (1,755 kgf·cm, 127 ft·lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nut.
SA–32
–
SUSPENSION AND AXLE
FRONT LOWER SUSPENSION ARM
2032
13.
REMOVE NO.1 AND NO.2 LOWER SUSPENSION
ARMS
(a)
Remove the bolt, shock absorber bracket from the No.1
lower suspension arm.
Torque: 59 N·m (600 kgf·cm, 44 ft·lbf)
(b)
Remove the 2 bolts and separate the No.1 and No.2 lower
suspension arms.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст