Lexus RX300 (MCU15). Service manual — part 390
DI–790
–
DIAGNOSTICS
LEXUS NAVIGATION SYSTEM
LEXUS RX300 (RM785E)
22. Radio reception poor.
INSPECTION PROCEDURE
1
Check the reception. (Select an AM or FM station band which signals are strong)
Yes
An electric wave environment is bad.
No
2
Are there any additional installation parts? (Telephone antenna, etc.)
Yes
Does the condition get better if removing them?
Influence of additional installation parts.
No
3
Is the contact of the plug jack of the radio OK?
NG
Take a measure for contact.
OK
Is the antenna cord caught or broken?
DI7PF–02
–
DIAGNOSTICS
LEXUS NAVIGATION SYSTEM
DI–791
LEXUS RX300 (RM785E)
23. Cassette tape cannot be inserted.
INSPECTION PROCEDURE
1
Is there a foreign object inside tape player?
Yes
Remove foreign object.
No
2
Is auto search button radio operating normally?
NG
Radio assembly faulty.
OK
3
Check the cassette tape for deformation or peeling–off of the label.
NG
Replace cassette.
OK
4
Is the tape slack?
NG
Remove slack before using.
OK
Replace the radio receiver assembly.
DI7PG–02
DI–792
–
DIAGNOSTICS
LEXUS NAVIGATION SYSTEM
LEXUS RX300 (RM785E)
24. Cassette tape cannot be eject.
INSPECTION PROCEDURE
1
Check if RADIO No. 2 or DOME fuse is OK?
NG
Replace fuse.
OK
2
Is not the cassette tape caught on the cluster panel?
YES
Remove the cassette tape.
NO
3
Check the radio receiver assembly.
PREPARATION:
Disconnect the radio receiver assembly connector.
CHECK:
Check voltage terminals +B.
OK:
+B: 10 – 14 V
CHECK:
Check voltage terminal ACC when turn ignition switch ACC or ON position.
OK:
ACC: 10 – 14 V
CHECK:
Check continuity terminal GND.
OK:
GND: Continuity
DI7PH–03
–
DIAGNOSTICS
LEXUS NAVIGATION SYSTEM
DI–793
LEXUS RX300 (RM785E)
NG
Replace or repair wire harness.
HINT:
When sending it for repair, leave as it is without attempting to
take it out by force.
OK
Replace the radio receiver assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст