Toyota FJ Cruiser (GSJ 10, 15 series). Manual — part 192
EX–6
1GR-FE EXHAUST – EXHAUST PIPE
EX
(d) Install the exhaust pipe stopper bracket with the 2
bolts (for 4WD).
Torque: 19 N*m (193 kgf*cm, 14 ft.*lbf)
3.
INSTALL CENTER EXHAUST PIPE ASSEMBLY
(a) Check the free length.
(1) Using vernier calipers, measure the free length
of the compression spring.
Minimum:
40.5mm (1.594 in.)
If the free length is less that the minimum,
replace the compression spring.
(b) Install the center exhaust pipe onto the 4 exhaust
pipe supports.
(c) Install the center exhaust pipe with the 2 bolts and 2
springs.
Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)
A129939
A128853
A129937
1GR-FE EXHAUST – EXHAUST PIPE
EX–7
EX
4.
INSTALL TAIL EXHAUST PIPE ASSEMBLY
(a) Install a new gasket onto the center exhaust pipe.
(b) Install the tail exhaust pipe with the 2 bolts and
exhaust pipe support.
Torque: 48 N*m (489 kgf*cm, 35 ft.*lbf)
5.
INSTALL HEATED OXYGEN SENSOR (See page
6.
CONNECT CABLE TO NEGATIVE BATTERY
TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)
7.
CHECK EXHAUST GAS LEAKAGE
A129936
EXTERIOR – FRONT BUMPER
ET–1
ET
BODY
EXTERIOR
FRONT BUMPER
COMPONENTS
FRONT BUMPER
COVER
RADIATOR GRILLE
x4
3.0 (30, 27 in.*lbf)
N*m (kgf*cm, ft*lbf) : Specified torque
x4
x2
x2
x5
x2
x2
3.0 (30, 27 in.*lbf)
8.0 (80, 71 in.*lbf)
3.0 (30, 27 in.*lbf)
B134727E01
ET–2
EXTERIOR – FRONT BUMPER
ET
FRONT BUMPER
EXTENSION LH
FRONT BUMPER
EXTENSION RH
FRONT BUMPER
FILLER LH
FRONT BUMPER
FILLER RH
FRONT BUMPER
REINFORCEMENT
FRONT BUMPER
SIDE SUPPORT LH
FRONT BUMPER
SIDE SUPPORT RH
FRONT BUMPER
UPPER RETAINER
N*m (kgf*cm, ft*lbf) : Specified torque
x2
65 (665, 48)
8.0 (80, 71 in.*lbf)
65 (665, 48)
65 (665, 48)
65 (665, 48)
x2
x2
x2
x3
x4
x4
3.0 (30, 27 in.*lbf)
3.0 (30, 27 in.*lbf)
B134728E01
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст