BYD S6, S6A, S6K. Service Instruction — part 5
BYD AUTO S6, S6A, S6K Owner's Instruction
Comfort and convenience devices 1-65
multifunction display twice (the
key turns to grey, and the AUTO
key lamp is off) to disconnect the
compressor.
In semi-auto mode, the
compressor
actuates/disconnects
intermittently. At this moment,
tap the A/C key on the
multifunction display (the key
turns to grey) to disconnect the
compressor.
In instruction mode, tap the A/C key
on the multifunction display to
light the key lamp, and the
compressor actuates. Then, tap
the A/C key to turn it to grey and
disconnect the compressor.
Tips
Air conditioner odor:
After the air conditioner is turned
on for 10-20S, there may be
musty odor. It is normal because
the water vapor in the air
condenses into water droplets
attaching to the surface of the
evaporator core when the air
conditioner is working, and the
water absorbs part of the body
sweat, smoke, and dust in the
car.
The water absorbing odor and
dust will be discharged through
the drain pipe, but it can
’t be
drained completely. After a long
time, the evaporator surface will
be moldy due to a lot of dust and
impurities attached.
Odor processing method:
Clean the air conditioner
evaporator with degreasing
solvents.
Odor prevention method:
Before stopping the car, turn off
the cooling air and turn on the
natural wind to maintain
relatively dry;
Check and replace the filter
regularly;
Keep the interior clean and
fresh.
CD Multimedia System (if
equipped)
Tips
Before the engine is started,
please do not use the audio
system for a long time to
prevent the storage battery
from running out of power.
The internal and external edges
of new laser CDs may be
rough, therefore remove any
burrs before they are used.
Otherwise, the plastic on the
rough edges may cause
interrupted playback and
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Comfort and convenience devices 1-66
cause the CD pickup to
become damaged.
Do not insert any foreign
materials into the CD player.
Please use standard-size
genuine discs. Some pirated
discs may jam in the CD pickup
and damage the CD pickup.
USB device prompt:
1) It is suggested the data cable
provided with the car be used to
connect the flash memory stick.
2) The USB port is only for the flash
memory sticks with capacities
lower than 8 GB rather than the
mobile hard disk.
3) The USB port only supports
music files that adopt the FAT
system and MP3 format.
4) The USB port may not support a
USB storage device with low
compatibility.
In the event of smoke or odour for
example, please cut the power
supply immediately and
contact the BYD auto sales
service station. Do not handle
it by yourself.
Cigar Lighter
WARNING
If the cigarette lighter can not be
ejected by itself after being
pressed, please contact the BYD
auto sales service station for
inspection as soon as possible.
Ashtray
WARNING
Close the ashtray completely
after use, so as to reduce the
possibility of accidents while
driving or injury during
emergency braking.
The ashtray can only be used to
extinguish cigarettes and cigars
etc. To prevent damage to your
car through fire, please do not
place paper or other
combustibles in the ashtray.
Accessory Power Socket (optional)
WARNING
The accessory power socket can
only provide 12 V DC power to
accessories whose rating power is
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Comfort and convenience devices 1-67
no more than 120 W. The cigarette
lighter must not be inserted into the
socket. Large-power accessories
are prohibited to be used.
Coat Hook
Please pull down the coat hook when
using it.
Tips
Please hang the coat or cap directly
on the hook. Do not hang other
objects on it (e.g. clothes rack or
sharp objects). Otherwise, when
the curtain air bag (if equipped) is
deployed, these objects may be
thrown out due to the strong
impulsive force, which may prevent
the air bag from being deployed.
Interior Rear-view Mirror
Interior Rear-view Mirror (standard)
Interior Rear-view Mirror (deluxe)
1. Adjust the position of the interior
rear-view mirror to enable watching
the rear vision of the car through the
rear windshield.
2. The automatic electronic anti-glare
feature is available for all models.
(1) Enable the electronic anti-glare
feature—The power indicator is lit;
The interior rear-view mirror may have
two conditions:
Daytime: the mirror shows clear rear
vision.
Night: When headlights irradiate from
1. Power button, 2. Power indicator
1. Power button, 2. Power indicator,
3. Compass display
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Comfort and convenience devices 1-68
the rear side, enable the anti-glare
feature, and the mirror reflectance
decreases; when there is no
headlights irradiation from the rear
side, disable the anti-glare feature,
and the mirror reflectance resumes
normal.
(2) Enable the electronic anti-glare
feature—The power indicator is off. It
is recommended to disable this
feature when backing the car in the
evening.
3. Compass display precautions of
electronic compass interior
rear-view mirror
(1) The electronic compass shows
when the car is started and hides
when the engine flames out;
(2) If the reversing radar is turned on,
the electronic compass does not show
during backing;
(3) The direction indicated by the car
front in the figure is the actual running
direction;
(4) Altitude shows the altitude at
which the car is located; it is normal if
the accuracy error is less than 50m.
Warning
Do not adjust the interior rear-view
mirror while driving, or else it may
make the driver unable to control the
car, leading to the accident and
causing casualties.
Carpet and Mat
N
W
E
S
m
Altitude
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Comfort and convenience devices 1-69
Carpet and mat: the mat fixing clamp
is standard equipment. The carpet or
mat provided by BYD is equipped with
a fixing clamp, and is designed so that
it can be clamped by the fixing clamp
and nylon catches are sewn or welded
on its back, which can prevent
disruptions to the operation on the
pedal due to forward slipping of the
mat. For the S6, only the left front
(driver) mat is equipped with the fixing
clamp.
a. Left front (driver) mat installation
methods are as follows:
(1). Install the mat fixing clamp:
As shown in figure, press the clamp
down a certain angle. The mat can be
installed after ensuring that the clamp
is installed well.
(2). Tear off the three non-woven
fabric strips on the nylon catches on
the back of the left front mat, and
attach the nylon catches and the
carpet together firmly.
b. Right front (passenger) mat
installation methods are as follows:
Mat back
Buckle
Clamp leg
Mat
installation
holes
Installation
methods shown
by the section
plane
P
re
s
s
in
g
d
ire
c
tio
n
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Comfort and convenience devices 1-70
Tear off the three non-woven fabric
strips on the nylon catches on the
back of the right front mat, and attach
the nylon catches and the carpet
together firmly.
c. Rear mat installation methods are
as follows:
Tear off the six non-woven fabric
strips on the buckle on the back of the
rear mat, and attach the buckle and
the carpet together firmly.
Tips
●
Make sure the mat is placed on
the floor correctly and is fixed with
the fixing clamp to avoid sliding or
rolling.
Cruise Control (optional)
With cruise control, you can maintain
a preset speed higher than 40 km/h
without having to depress the
accelerator pedal. The function can
be initiated for driving on straight and
smooth motorways.
Initiation of cruise control
a. Press the master cruise control
button (ON/OFF) on the right of the
steering wheel and the indicator
light for cruise control on the
dashboard comes on.
b. Increase the car speed to above 40
Mat back
Buckle
Mat back
Buckle
Master cruise
control button
Deceleration/s
et button
Acceleration/res
et button
Cancel button
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Comfort and convenience devices 1-71
km/h.
c. Press the deceleration/set (-/SET)
button to initiate the cruise control.
d.
The cruise control cannot maintain
the set speed when the car is going
up or down a slope.
Changing a set speed
The preset cruise speed can be raised
with any of the following methods:
a. The car can be accelerated
continuously by holding the
acceleration/reset (+/RES) button.
When the expected cruise speed is
reached, simply release the button.
b. Depress the accelerator pedal.
Press the deceleration/set (-/SET)
button after the expected cruise
speed is reached.
c. If you want to raise the speed
slightly, you can press the
acceleration/reset (+/RES) button
repeatedly. The speed will increase
by 1.6 km/h for each press.
The preset cruise speed can be reduced
with any of the following methods.
a. The car can be decelerated by
holding the deceleration/set (-/SET)
button. When the expected cruise
speed is reached, simply release
the button.
b. Depress the brake pedal lightly.
When the car is decelerated to the
expected speed (over 40 km/h),
press the deceleration/set (-/SET)
button. The car will maintain the
expected speed.
c. If you want to reduce the speed
slightly, you can press the
deceleration/set (-/SET) button
repeatedly. The speed will decrease
by 1.6 km/h for each press.
Canceling cruise control
Cruise control can be cancelled with
any of the following methods:
a. Depress the brake pedal.
b. Press the cancel (CANCEL) button
on the steering wheel.
c. Press the master cruise control
button (ON/OFF).
d. Exit from gear D.
Auxiliary Parking System (optional)
WARNING
When the speed is over 10 km/h,
the auxiliary parking system will
stop working.
Do not add any other object
within the working range of the
sensor.
Do not wash the sensor with
water or steam. Otherwise, the
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Comfort and convenience devices 1-72
sensor may be damaged.
During parking, the auxiliary parking
system will remind the driver of the
distance between the car and the
barrier through the multi-functional
display, touch screen and buzzer. A
sensor is used in this system to detect
the barrier.
Auxiliary parking switch (optional)
On the air conditioning panel
After the switch is pressed, the
multi-functional display will illuminate
the car-shaped icon
to inform the
user that the system is working.
Display
When the sensor detects a barrier, the
icon will be displayed on the
multi-functional display/air conditioning
panel and touch screen according to the
shape of the barrier and the distance
between the car and the barrier.
◆ Multi-functional display/air
conditioning panel
◆ Touch screen
When the car moves forward, the touch
screen will show the full-screen display.
When the car reverses
The top right of the screen will display
Distance display and buzzer
When the sensor detects a barrier, the
direction of the barrier and the
approximate distance between the car
Auxiliary parking switch
Outdoor
temperature
Mode
Independe
nt control
Temperature-
Temperature+
Automati
c
OFF
Temperature+
Temperature-
Thursday
Auxiliary parking system
Please check the surrounding
conditions to ensure safety.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Comfort and convenience devices 1-73
and the barrier will be displayed and
the buzzer will beep.
Illustration of the rear central sensor
operation
Approximate
distance
Display
illustration
Alarm
sound
1.2m to 0.8 m
Slow
0.8m to0. 50
m
Fast
0.5m or
shorter
Long
beep
Angle sensor operation illustration
Approximate
distance
Display
illustration
Alarm
sound
0.6m to 0.5m
Fast
0.5m or
shorter
Long
beep
Sensor detecting range
When the car moves forward, the front
sensor will work; when the car
reverses, all sensors will work.
Some car conditions and the
surrounding environment may affect
the performance of the sensors to
detect barriers accurately. Details are
shown as follows:
There is dirt, accumulated water or
mist on the sensor;
There is snow on the sensor or the
sensor is frozen;
The sensor is covered with any
manner;
The car inclines laterally or is
over-loaded;
The car is driven on very bumpy
roads, slopes, gravel roads or
grass;
The sensor is re-painted;
Approximately
600 mm
Approximately
600 mm
Approximately 500 mm Approximately 1200
mm
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Comfort and convenience devices 1-74
It is quite noisy around the car due
to the noise produced by vehicle
horns, motorbike engines,
pneumatic braking sounds of large
vehicles, or other noises that may
produce ultrasonic waves.
There is another vehicle equipped
with an auxiliary parking system
nearby;
The car is equipped with towing
rings;
The bumper or the sensor suffers a
strong impact;
The car is approaching a high or
twisty road edge;
In the heat of the sun or severe
cold weather;
Non-original suspension is
installed.
Except the above cases, the sensor
may fail to judge the actual distance to
some barriers correctly due to their
shape and materials. Please pay
particular attention to the following
barriers.
Electric cables, fences and ropes,
etc;
Cotton covers, snow, and other
materials that absorb radio waves;
Objects with sharp edges or
corners;
Low barriers;
High barriers whose upper section
stretches out toward your car;
Objects under the bumper;
Objects close to the car;
People around the car (dependent
on their clothing).
If the multi-functional display or the
touch screen shows a picture or the
buzzer beeps, it may be that a sensor
has detected a barrier or the sensor
has experienced external interference.
If the phenomenon continues, you can
contact the BYD service shops for
inspection.
Parking Imaging System (optional)
The parking imaging system helps the
driver park the car by displaying the
pictures of surrounding objects in
real-time.
The parking imaging system is an
additional means for parking and is
divided into reversing camera mode
and right front camera mode.
Reversing camera mode
When the start button is at gear "ON",
move the shift lever to gear "R" to
initiate reversing camera mode.
The reversing camera is installed on
the back door.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Comfort and convenience devices 1-75
Display on the touch screen
The two lines in the picture are the
reversing safety lines.
Red: within 0-0.5 m
Yellow: within 0.5-2 m
Green: over 2 m
Right front camera mode
When the start button is at gear ON,
press button
on the
steering wheel to initiate right front
camera mode. If the external
environment is dark, the right front
picture footlight will be lit to provide
light for the camera, so that the
surrounding objects can be seen
clearly. To turn off the camera system,
press button
on the
steering wheel.
The right front camera is installed at
the right external rear-view mirror.
Display on the touch screen
The displayed area varies with the car
directions and the road conditions.
Limitation of the parking imaging
system
Please check the
surrounding conditions:
ensure safety!
Reversing
picture
Please check the surrounding
conditions to ensure safety!
Right front
picture
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Comfort and convenience devices 1-76
Objects close to the two side corners of
the bumper bar or under the bumper
can not be seen in the reversing picture.
As shown in the following figure:
Objects close to the side corners of
the bumper
Objects under the bumper
Objects right in front of the car or to
the rear right of the car cannot be
seen in the right front picture.
As shown in the following figure:
Object is straight ahead of the vehicle.
Object is at the rear to the right of the
vehicle.
Tips
Do not overly rely on the parking
imaging system. Pay attention to
your surroundings before parking.
Never park by only looking at the
screen. The distance displayed
on the screen is different from the
actual distance between the
vehicle and the obstacle.
If the rear door is not completely
closed, do not use this system.
The position and installation
angle of a camera may alter
during a rear-end collision or in
the event of colliding with an
obstacle. Please contact a BYD
service station to check the
position and installation angle of
the camera.
Do not remove, disassemble or
modify the camera as there are
dust prevention and waterproof
structures on it.
Exposing the system to sudden
temperature changes, such as
pouring hot water on the vehicle
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Comfort and convenience devices 1-77
in very cold weather, may affect
proper function.
If water, snow or mud covers the
camera, wash with water and
wipe the lens with a piece of soft
cloth. For difficult to clean foreign
matters, such as oil and rubber,
use mild cleaner and water to
wash and wipe it with a piece of
soft cloth.
Prevent organic solvents, waxes,
glass cleaners or glass coatings
from adhering to the camera.
Remove immediately if attached
to the camera.
Since flashing screens on the
display may appear due to blinking
lights, which may affect your vision,
please switch off the parking assist
system with rear view camera in
the event of blinking lights, such as
indicator lights.
It is difficult to display an image even
if the system functions normally
under the following circumstances:
1) When the camera is in a dark
area (such as at night)
2) When the camera is exposed to
very high or very low temperatures
3) There is water or mist on the lens
(for example, when it is raining)
4) The lens is dirty with snow, mud,
etc. There are scratches or dirt on
the lens
5) A strong light hits the camera
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Driving Guidelines 2-1
Chapter 2
Driving Guidelines
Run-in Period . . . . . . . . . . . . . . . . . . . ... 2-2
Fuel . . . . . . . . . . . . . . . . . . . . . . . .. 2-2
Engine Exhaust Warning . . . . . . . . . . . . . . . .. 2-3
Brake System . . . . . . . . . . . . . . . . . . . ... 2-4
Carrying Luggage . . . . . . . . . . . . . . . . . . . 2-6
Cover Curtain (if equipped) . . . . . . . . . . . . . . .. 2-7
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Driving Guidelines 2-2
Run-in Period
Drive the car stably and do not drive
at high speed.
BYD S6 does not have a complicated
run-in procedure. During the first
3,000 kilometres, please follow the
tips below to save fuel and extend the
service life of the vehicle:
1. When starting and driving, avoid
sudden acceleration.
2. Do not let the engine run
overspeed.
3. Avoid emergency braking during
the first 300 kilometres.
4. Do not drive the car for a long time
at the same speed, high or low.
Fuel
Appropriately selected fuel can benefit
engine performance, and is the key to
controlling exhaust emissions and
protecting relevant components.
Only use #93 or above unleaded
petrol.
Tips
Do not use leaded petrol, which
may cause failure of the
three-way catalytic converter and
abnormality of the emission
pollution control device. It will also
increase maintenance expense.
Engine damage or noncompliance
of emissions as a result of
improper fuel is not covered by
BYD S6 warranty.
Refill fuel
Fuel filler cap opening button
Tips
Please refill fuel at an authorised
filling station.
Please observe the rules of the
filling station.
When the fuel tank cap is
loosened, do not remove it
immediately. In hot weather, if the
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Driving Guidelines 2-3
fuel filler cap is removed suddenly,
pressurised fuel may spray out of
the filler and cause injury.
Engine Exhaust Warning
WARNING
●
Large amounts of un-combusted
mixture gas entering the three-way
catalytic converter may cause
overheating of the converter and
even fire. To prevent dangers,
please follow the instructions
below:
1)Do not drive the car when the
fuel level is extremely low;
insufficient fuel may cause misfire
in the engine and overload in the
three-way catalytic converter.
2)Do not let the engine run for over
10 minutes at high idle speed or
over 20 minutes at low idle speed.
3)Do not let the engine run
overspeed.
4)Do not push or pull the car for
starting.
5)Do not press the start button
when driving.
6)Always keep the engine at an
optimum condition. If the electrical
system, electronic ignition system
or fuel system has a fault, the
three-way catalytic converter will
overheat.
7)If the engine has trouble in
starting or stalls frequently, please
check it immediately.
8)To ensure that the three-way
catalytic converter and the exhaust
emission control device function
properly, BYD S6 should be
inspected periodically according to
the maintenance instructions.
Avoid inhaling exhaust gases
from the engine.
Make sure the exhaust system
has no leakage or loose
connections. Please check the
exhaust system regularly. If the
car has a collision with any
objects or when you hear
abnormal exhaust noise, please
check the exhaust system
immediately.
WARNING
Do not run the engine for a long
period in a garage or
unventilated site, as exhaust
gases may accumulate and
cause serious danger.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст