BYD S6, S6A, S6K. Service Instruction — part 4
BYD AUTO S6, S6A, S6K Owner's Instruction
Instruments and Indicator Lights 1-49
that the engine temperature is too
high. Please park your car on a safe
section of road immediately to allow
the engine to cool down and contact
the BYD auto sales service station.
Fuel Gauge
It is used to indicate the approximate
amount of fuel remaining in the fuel
tank.
The displayed value will be more
accurate when the car is driven on a
smooth road. The indicated actual
amount of fuel remaining will deviate
slightly when the car is driven round
bends or on rough roads.
Pressing down the start button and
putting the power at the gear ON; the
corresponding liquid crystal band in
the instrument will illuminate to
indicate the present approximate fuel
amount remaining in the fuel tank.
After the power is turned to gear OFF,
the fuel indication band will switch off.
In the following cases, fuel in the fuel
tank may move around and the
indicated fuel amount on the fuel
gauge may vary and the indicator light
for low fuel may come on earlier.
1)
Emergency braking,
accelerating or turning;
2)
When driving on a slope or
bend.
If the remaining fuel is consumed to a
certain amount, the first point on the
scale of the fuel indicator will flash,
and the indicator light for low fuel will
come on as well. Meanwhile, the right
liquid crystal display shows "Please
add fuel" to remind the user to refill
with fuel as soon as possible.
WARNING
Avoid driving with a low fuel
level. When all fuel is used up,
the engine will stall and the
catalytic converter will be
damaged.
Driving Information Display
The driving information includes the
fuel consumption, the average fuel
consumption, the transient fuel
consumption, cruising range,the
average car speed and the driving
time.
Fuel consumption: used to indicate the
amount of fuel consumed from the last
reset to the present; the value is not
entirely the same as the actual one.
Average fuel consumption: used to
indicate the average fuel consumption
per 100 km from the last reset to the
present. The information will be
displayed until the car has been
driven a certain distance. It is
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Instruments and Indicator Lights 1-50
indicated in L/100 km.
Transient fuel consumption: when the
start button is at gear ON, the
transient fuel consumption is indicated
in litres per hour (L/h) in the case of
idle speed, and indicated in litre per
100 km (L/100 km) after the car speed
reaches a certain value. The
information is closely related to the
action of accelerating and braking.
Cruising range: used to indicate the
remaining travelling distance
calculated from the amount of
remaining fuel in the fuel tank. The
value is not entirely the same as the
actual one. When the fuel level is low
and the driving mileage is below a
certain value, the cruising range is
displayed as "- - km".
Average car speed: used to indicate
the average car speed from the last
reset to the present. It is indicated in
km/h.
Driving time: used to indicate the time
of idle speed and driving accumulated
from the last reset to the present.
Driving information operation: press
button
on the steering wheel to
switch the displayed driving
information. Select any interface of
fuel consumption/average fuel
consumption/average car
speed/driving time and hold
button
, and then the value in
the selected interface will reset to
zero.
Menu Adjustment Display
It is used to display the car status
information and set the car functions
and instrument display effects, etc.
By operating the buttons on the
steering wheel, the driving information
display on the right LCD is switched to
the menu adjustment interface.
1.
used to ascertain the
selected menu option.
2.
used to scroll up the menu bar.
3.
used to scroll down the menu
bar.
The menu structure is shown as
follows:
Maintenance
Maintenance interval
Maintenance mileage
Check
Language
Enter
Enter
Enter
Select
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Instruments and Indicator Lights 1-51
Individual setting
Subject element
Car speed alarm
Reset
The menu functions are shown as
follows:
1.
Maintenance: set the maintenance
functions and status
When the maintenance function is
initiated, if maintenance is due or
overdue, by pressing down the button,
the car will be at the power gear ON
and the right LCD will display the
corresponding indication information.
1.1 Maintenance interval: set the
maintenance interval status
Display item
Function
Maintenance
interval
Menu name
XX days
Maintenance interval
or - - -
set currently or if the
function is disabled,
three short dashes
will be displayed
ON/OFF
Initiate or disable the
function for
maintenance interval
+30 days
30 days as the
increment to extend
the maintenance
interval
-30 days
30 days as the
increment to shorten
the maintenance
interval
reset
Reset the
maintenance interval
return
Exit from the menu of
maintenance interval
and return to the
previous menu
1.2 Maintenance mileage: set the
maintenance mileage state
Display item
Function
Maintenance
mileage
Menu name
X km
or - - -
Maintenance mileage
set currently or if the
function is disabled,
three short dashes will
be displayed
ON/OFF
Initiate or disable the
function of
maintenance mileage
+500 km
500 km as the
increment to increase
the maintenance
mileage
-500 km
500 km as the
increment to reduce
the maintenance
mileage
reset
Reset the maintenance
mileage
return
Exit from the menu for
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Instruments and Indicator Lights 1-52
maintenance mileage
and return to the
previous menu
1.3 Check: check the current
remained maintenance interval
and maintenance mileage.
2.
Language: set the display
language type
3.
Individual setting: set the
individualised functions
3.1 Subject element: set the subject
colour for the left and right LCD
3.2 Car speed alarm: set the value
for the car speed alarm
If the car speed reaches the set alarm
value, the alarm information will be
displayed in the right LCD of the
dashboard.
Display item
Function
Car speed
Menu name
alarm
X km/h
or - - -
Alarm speed set
currently or if the
function is disabled,
three short dashes will
be displayed
ON/OFF
Initiate or disable the
function of car speed
alarm
+10 km/h
10 km/h as the
increment to increase
the alarm speed
-10 km/h
10 km/h as the
increment to reduce
the alarm speed
return
Exit from the menu for
car speed alarm and
return to the previous
menu
4.
Restore factory settings: after the
function is selected, the current set
values will be deleted and reset to
the factory default value.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Instruments and Indicator Lights 1-53
Indication Information Display
It is displayed in the right LCD and
used to remind the user of the car
state change.
Display
description or
buzzer tone
Description
Key is not
detected
If key is not detected,
this information will
be displayed after
pressing starting
switch.
Low key battery
This information
prompts key battery
is running low.
Please change
battery.
Parking brake is
not released.
When the vehicle
speed exceeds 5
km/h and the
parking braking is
not completely
released, this
information will be
displayed with a
buzzer warning.
Please refill fuel
When remaining fuel
is low, this
information will be
displayed with
buzzer warning.
XX days to the
maintenance
date
The information is
displayed to indicate
when the
maintenance
interval is due soon.
XX km to the
maintenance
mileage
The information is
displayed to indicate
when the
maintenance
mileage is due
soon.
XX days XXX
km to the
The information is
displayed to indicate
maintenance
date
when both the
maintenance
interval and the
maintenance
mileage are due.
It is time for
maintenance
The information is
displayed to indicate
when the
maintenance
interval or the
maintenance
mileage is due.
Please ensure
the main menu
is initiated for
safe driving
When the vehicle
speed exceeds 5
km/h and the menu
interface is
accessed, the
information will be
displayed.
Fault Information Display
It is displayed in the right LCD and
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Instruments and Indicator Lights 1-54
used to indicate the user to faults with
the car. In this case, you have to
contact the BYD auto sales service
station for repair.
Display
description or
buzzer tone
Description
Cooling fluid
temperature
is over high
This information will
be displayed when the
cooling fluid
temperature is above
high. Stop the car
immediately and
contact BYD auto
sales service station.
Low engine
oil pressure
The engine oil is not
sufficient. Stop driving
and contact the BYD
auto sales service
station immediately.
Check
charging
This information
indicates that there is
system
fault with the charging
system. Stop the car
immediately and
contact the BYD auto
sales service station.
Check brake
system
This information
indicates that the
brake fluid level is low
or there is a fault with
the braking system.
Stop the car
immediately and
contact the BYD auto
sales service station.
Check the
ABS system
This information will be
displayed when there
is fault with the ABS or
braking system.
Contact the BYD auto
sales service station
for inspection
immediately.
Check the
The information will be
SRS system
displayed when faults
are found with the
SRS. Contact the
BYD auto sales
service station for
inspection
immediately.
Please
inspect the
vehicle
network
This information will
be displayed when the
vehicle network is
abnormal. Stop the
car immediately and
contact the BYD auto
sales service station.
Indicator for Unfastened Front
Passenger Seat Belt
The driver seat belt prompt system
works via the indicator light and the
buzzer and is used to remind the
driver and the passenger to fasten the
seat belts.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Instruments and Indicator Lights 1-55
Pressing the start button when the
power is at gear ON; the indicator light
will flash and buzzer beep to remind
the driver to fasten the seat belt.
When driving, the indicator light will
flash repeatedly and the buzzer sound.
If the seat belts remain unfastened for
some time, the indicator light stays on
constantly.
If both the driver and the passenger
have fastened the seat belts, the
indicator light will turn off and the
buzzer will stop beeping.
Low Engine Oil Pressure
Indicator Light
The indicator light will come on to
indicate that the engine oil pressure is
low.
If the light flashes or is on constantly
whilst driving, the car should be driven
away from the road and parked in a
safe place, and the engine should be
stopped immediately. Ask for help
from the BYD auto sales service
station.
When the engine runs at idle speed,
the indicator light may flash at
intervals or come on temporarily after
emergency braking. When the engine
is accelerated gradually, the indicator
light may go out, which is normal.
WARNING
When the indicator light for low
engine oil pressure comes on, park
the car safely and stop the engine
immediately. Otherwise, the engine
will be damaged.
Charging Indicator
If the light comes on during engine
operation, it means that something is
wrong with the charging system.
When the start button is at gear ON,
the indicator light will come on.
Normally, after the engine is started,
the indicator light will go out.
NOTE
When the charging indicator is on
and the right LCD displays "Please
check the charging system", stop
the car and the engine as soon as
possible and contact the BYD
service shops.
Engine Fault Indicator Light
Pressing the start button to put the
power at gear ON; the indicator light
will come on for several seconds and
then go out. If the indicator light
comes on in other cases, it means
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Instruments and Indicator Lights 1-56
that something is wrong with the
engine's EFI (electrical fuel injection)
system. Please contact the BYD
service shops for inspection/as soon
as possible.
Parking Brake System
Indicator Light
When the start button is at gear ON,
the indicator light will come on in the
following cases:
1) When the brake fluid level is under
the minimum.
2) The car is stopped and the parking
brake handle is pulled up.
WARNING
When the parking brake system
indicator light comes on, please
inspect the car immediately, as it is
quite dangerous to keep driving.
Contact the BYD service shops to
inspect the car in the following cases:
1) When the start button is at gear ON;
the indicator light will not come on
even if the parking brake is engaged.
2) When the start button is at gear ON;
the indicator light will not go out
even if the parking brake is
released.
SRS Indicator Light
The indicator light is used to monitor
the air bag system.
When the start button is at gear ON,
the indicator light will come on for
about 5 s and then go out, which
means that SRS is working normally.
If any of the following occurs, it means
that something is wrong with SRS.
Please contact the BYD service shops
for inspection as soon as possible:
When the start button is at gear ON,
the indicator light is not on or is on
constantly.
This light comes on or flashes
whilst driving.
ABS Indicator
When the start button is at gear ON,
the indicator light will come on for
several seconds and then go out.
If the indicator light is not on when the
start button is at gear ON, or is on at
any other moment, it means that
something is wrong with the ABS.
Please contact the BYD auto sales
service station as soon as possible.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Instruction
Instruments and Indicator Lights 1-57
If the indicator light comes on, the car
will still have normal braking ability but
not the ABS function.
The instantaneous flashing of the
indicator light during operation does
not indicate any fault.
Car Doors and Back Door
Opening Monitor Light
If the back door or any of car doors is
not closed properly, the corresponding
lights on the monitor light will come on.
Steering Signal and Danger
Alarm Indicator Light
When you indicate, the left or right
steering signal light will flash. If the
light doesn't flash or flashes rapidly, it
generally means that something is
wrong with the steering signal or the
relevant circuit.
When the danger alarm button is
pressed, both the dashboard light and
the steering signal light will come on.
All external steering signal lights will
flash as well.
Width-indicating Light Indicator
When the headlight switch is at
position
or
, the indicator
light will come on. If you have turned
the power to gear ACC/OFF and the
headlights have not been turned off,
the indicator light will stay on
constantly.
After the headlight switch is put to
position
, the background light
intensity of the combination
instrument and the dashboard can be
adjusted by turning the travel reset
button on the instrument.
When the background light is adjusted,
the right LCD will show the levels of
background light adjustment.
Low Fuel Indicator Light
The indicator light is on the fuel gauge.
If the indicator light is on, it means that
there is not much fuel remaining in the
tank and reminds the user to refill with
fuel as soon as possible. On a slope
or bend, the low fuel indicator light
may come on earlier due to fuel
moving around in the tank.
Safety System Indicator Light
When the safety system is set, the
indicator light will come on constantly
for several seconds and then start
flashing, which means that the car has
entered the anti-theft state.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Instruments and Indicator Lights 1-58
Main Beam Indicator Light
When the main beam headlights are
used, the light will come on.
Front Fog Light Indicator
When the front fog lights are turned on,
the indicator light will come on.
Rear Fog Light Indicator
When the rear fog lights are turned on,
the indicator light will come on.
Main Indicator Light for
Cruise Control (optional)
The indicator light will come on when
the car enters cruise control, which
means the car runs at a set speed.
Cruise Control Indicator Light
(optional)
The indicator will come on when you
press down the master cruise control
button.
SVS Indicator Light
Pressing the start button and putting
the power at gear ON; the light will
come on for several seconds and then
go out. If the indicator light is turned
on or flashes at other times, it means
that something is wrong with the AT
transmission box or the engine control
system. In this case, the car should be
driven to the BYD auto sales service
station for inspection.
Smart Key, Key Position
Indicator
Pressing the start button, if there is
not a key; the indicator light will come
on for several seconds and the buzzer
will beep; if the indicator light flashes,
it means that the power of the smart
key is low. If the indicator light is not
on, please supply power for starting.
If the key is taken into the car several
seconds after the indicator light is on,
power can be supplied for starting
when the indicator light is off.
Emergency Light
Once the warning light is on, the right
LCD will display the fault information
or prompt information. The light is on
to remind the user.
Sunroof not Closed Alarm Function
(optional)
When the power is at gear OFF and
the sunroof is not closed, the
instrument buzzer will beep if the
driver opens the driver-side door.
Meanwhile, the right LCD will show
"Sunroof Unclosed" to remind the user
that the sunroof is open presently.
When the sunroof is open and the
power gear is shifted from ON to OFF,
the buzzer will also beep and the LCD
will show the prompt information as
well.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Comfort and convenience devices 1-59
Chapter 1
Section 5
Operation of Instruments and Controls
Comfort and Convenience Devices
Indoor Air Environment Control System . . . . . . . . . . 1-60
CD Multimedia System (if equipped) . . . . . . . . . . .. 1-65
Cigar Lighter . . . . . . . . . . . . . . . . . . . ... 1-66
Ashtray . . . . . . . . . . . . . . . . . . . . . ... 1-66
Accessory Power Socket (optional) . . . . . . . . . . . 1-66
Coat Hook . . . . . . . . . . . . . . . . . . . . .. 1-67
Interior Rear-view Mirror. . . . . . . . . . . . . . . . 1-67
Carpet and Mat . . . . . . . . . . . . . . . . . . .. 1-68
Cruise Control (optional) . . . . . . . . . . . . . . . 1-70
Auxiliary Parking System (optional) . . . . . . . . . . . 1-71
Parking Imaging System (optional) . . . . . . . . . . . 1-74
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Comfort and convenience devices 1-60
Indoor Air Environment Control System
Air conditioner panel (standard)
Outdoor temperature
Temperature+
Temperature-
Automatic
OFF
Temperature+
Temperature-
Thursday
Mode
Independent
control
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Comfort and convenience devices 1-61
1. Automatic Control
2. Turn Off Air Conditioner
3, 4. Driver Temperature
Adjustment Button
5. Internal & External Circulation
Mode
6. Cooling Button
7, 9, 11. Electronic Clock
Adjustment Button
8, 12. Blower Capacity
Adjustment Button
10. Supply Mode Button
15, 16. Passenger-side
Temperature Adjustment
Button
17.
Rear Defrosting
18.
Front Defrosting
Button
Note: Strong Cooling Button: When this button is pressed down, the indicator is lit and the temperature turns to the lowest (LO)
automatically, the circulation mode turns to
“Internal” and the capacity turns to highest. This feature will decrease the interior
temperature as soon as possible.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Comfort and convenience devices 1-62
Air conditioner panel (deluxe)
1. Automatic Control, 2. Turn off Air Conditioner, 3, 4. Driver Temperature Adjustment Button, 5. Internal & External Circulation
Mode Button, 6. Map Navigation Button, 7. Destination Setting Button, 8. Phone Button, 9. Air Conditioner Control Button, 10.
Settings Button, 11. Image Quality Adjustment Button, 12. Audio System Button, 13. Reversing Radar Switch, 14, 15
Passenger
–side Temperature Adjustment Button16. Rear Defrosting Button, 17. Front Defrosting Button
Automatic
OFF
Temperature+
Temperature-
Temperature+
Temperature-
Map
Destination
Phone
A/C
Settings Quality
Audio
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Comfort and convenience devices 1-63
Multifunction Display
1. Driver-side Interior Temperature Display, 2. Reversing Radar Display, 3. Date Display, 4. Exterior Temperature Display, 5.
Time Display, 6. Passenger-side Interior Temperature Display
Tips
If turning to ON position or started in
extreme temperature, the multifunction
display may be abnormal (e.g. LCD
can’t be lit). When the temperature
resumes normal, the display will work
normally.
Driver's side
Outdoor
Passenger's side
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD AUTO S6, S6A, S6K Owner's Manual
Comfort and convenience devices 1-64
Automatic operation
After the automatic operation button is
pressed, the air conditioning will be
turned on and the system is set to fully
automatic mode. The cooling or heating
air ratio and air volume will be adjusted
automatically to raise or reduce the
current indoor temperature to the set
temperature.
When the temperature is set to the
low limit (L0W) or the high limit (HI),
the air conditioning system will just
run in the cooling mode or heating
mode.
Internal & external circulation
button
After the button is pressed, the
indicator light on the button will come
on and air from inside the car will be
sent into the car again via the system
(internal circulation mode). When the
button is pressed again, the indicator
light will go off and air will enter from
outside the car (fresh air mode, i.e.
external circulation mode).
Independent temperature control
When the independent control button
(the indicator light is on) is pressed,
the driver-side and the
passenger-side temperature can be
adjusted respectively.
When the independent control button
is pressed again (the indicator light is
off), the temperature of the driver side
and the passenger side will be the
same if the driver-side temperature
button is adjusted.
Mode Button
Air direction can be selected by
pressing the button.
Front defrost button
When the button is pressed, the
indicator light will come on and the
main air flow will blow to the front
windscreen for fast defrosting.
Whichever mode has been selected,
the mode specified using the button
will be the top priority. The air
conditioning will be turned on and
operated automatically. The system
will select the fresh air mode. For fast
defrosting, the fan must be set to the
highest speed manually. Also, the air
flow to the windscreen can be
increased by closing the side air outlet
of the dashboard.
When the button is pressed again, the
system will be reset to the original
setting.
Tips
To disconnect the compressor
In auto mode, the AUTO key
lamp is lit, and the compressor is
turned on by default. At this
moment, tap the A/C key on the
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст