Citroen C5 Dag (2010 year). Manual — part 7

V

89

V I S I B I L I T Y

Linked with the automatic
"Guide-me-home" lighting
Link with the automatic illumination
of headlamps provides the "guide-
me-home" lighting with the following
additional options:
-

selection of the duration of light-
ing for 15, 30 or 60 seconds in
the vehicle parameters on the

instrument panel screen confi gu-

ration menu,

-

automatic activation of "guide-
me-home" lighting when auto-
matic illumination of headlamps
is in operation.

Operating fault
In the event of a malfunction of the
brightness sensor, the lamps come
on and a message appears on the
instrument panel screen, accompa-
nied by an audible signal.
Consult a CITROËN dealer.

In fog or snow, the brightness

sensor may detect suffi cient light.

Therefore, the lamps will not come
on automatically.
Do not cover the brightness sen-
sor, linked with the rain sensor and
located in the centre of the wind-
screen behind the rear view mirror;
the associated functions would no
longer operate.

MANUAL HEADLAMP
ADJUSTMENT

To avoid dazzling other road users,
the height of the halogen bulb head-
lamps must be adjusted according
to the load in the vehicle.
0. 1 or 2 people in the front seats.
-. 3 people.
1. 5 people.
-. Intermediate setting.
2. 5 people + maximum authorised

loads.

-. Intermediate setting.
3. Driver + maximum authorised

loads.

Initial setting is position "0".

AUTOMATIC ADJUSTMENT
OF DIRECTIONAL
HEADLAMPS

Do not touch the xenon bulbs.
Consult a CITROËN dealer.

If a malfunction occurs,
this warning lamp is dis-
played on the instrument
panel, accompanied by
an audible signal and a
message on the instru-
ment panel screen.

The system then places your headlamps
in the lowest position.

To avoid causing a nuisance to other
road users, this system corrects the
height of the xenon headlamp beams
automatically and when stationary,
depending on the load in the vehicle.

V

89

V I S I B I L I T Y

Linked with the automatic
"Guide-me-home" lighting
Link with the automatic illumination
of headlamps provides the "guide-
me-home" lighting with the following
additional options:
-

selection of the duration of light-
ing for 15, 30 or 60 seconds in
the vehicle parameters on the

instrument panel screen confi gu-

ration menu,

-

automatic activation of "guide-
me-home" lighting when auto-
matic illumination of headlamps
is in operation.

Operating fault
In the event of a malfunction of the
brightness sensor, the lamps come
on and a message appears on the
instrument panel screen, accompa-
nied by an audible signal.
Consult a CITROËN dealer.

In fog or snow, the brightness

sensor may detect suffi cient light.

Therefore, the lamps will not come
on automatically.
Do not cover the brightness sen-
sor, linked with the rain sensor and
located in the centre of the wind-
screen behind the rear view mirror;
the associated functions would no
longer operate.

MANUAL HEADLAMP
ADJUSTMENT

To avoid dazzling other road users,
the height of the halogen bulb head-
lamps must be adjusted according
to the load in the vehicle.
0. 1 or 2 people in the front seats.
-. 3 people.
1. 5 people.
-. Intermediate setting.
2. 5 people + maximum authorised

loads.

-. Intermediate setting.
3. Driver + maximum authorised

loads.

Initial setting is position "0".

AUTOMATIC ADJUSTMENT
OF DIRECTIONAL
HEADLAMPS

Do not touch the xenon bulbs.
Consult a CITROËN dealer.

If a malfunction occurs,
this warning lamp is dis-
played on the instrument
panel, accompanied by
an audible signal and a
message on the instru-
ment panel screen.

The system then places your headlamps
in the lowest position.

To avoid causing a nuisance to other
road users, this system corrects the
height of the xenon headlamp beams
automatically and when stationary,
depending on the load in the vehicle.

V

90

V I S I B I L I T Y

DIRECTIONAL LIGHTING

without cornering lighting

with cornering lighting

"Cornering lighting" function

With dipped or main beams, this
function provides additional lighting
for the inside of a bend, when the
vehicle speed is below 25 mph

(approx 40 km/h).
This lighting is most useful when
travelling at low and medium speed
(urban driving, winding road, inter-

sections, parking manoeuvres...).

Activation
This function is activated:
-

when the direction indicator is
activated,

-

from a certain angle of rotation of
the steering wheel.

Deactivation
This function is deactivated:
-

below a certain angle of rotation
of the steering wheel,

-

when stationary or at very low
speed,

-

when reverse gear is engaged,

-

when the directional headlamps
are switched off.

V

91

V I S I B I L I T Y

Programming

The function is activated or deac-
tivated via the instrument panel
screen "Main Menu".
To do this, select "Vehicle parameters\
Lighting\Directional headlamps".

Operating fault

If a malfunction occurs, this

warning lamp fl ashes on the

instrument panel, accompa-
nied by a message on the
multifunction screen.

Consult a CITROËN dealer.

When stationary or moving at very
low speed or when reverse gear is
engaged, the function is inactive.
The status of the function remains
in the memory when the ignition is
switched off.

Directional headlamps
function

When the dipped or main beam
headlamps are on, this function, as-
sociated with the "cornering lighting"
function, enables the light beam to
follow the direction of the road.
The use of this function, linked with
the xenon headlamps only, consid-
erably improves the quality of your
lighting when cornering.

with directional lighting

without directional lighting

V

92

V I S I B I L I T Y

WIPER CONTROLS

System for selection and control of
the various front and rear wiping
modes for the elimination of rain and
cleaning.
The vehicle's front and rear wipers
are designed to improve the driver's
visibility progressively according to
the climatic conditions.

Programming

Various automatic wiper control
modes are also available according
to the following options:
-

automatic rain sensitive wind-
screen wipers,

-

rear wiping on engaging reverse
gear.

Manual controls

The wiper commands are issued di-
rectly by the driver by means of the
stalk A and the ring B .

Rear wiper (Tourer)

B. rear wiper selection ring:

park,

intermittent wipe,

wash-wipe (set duration).

fast (heavy rain),

normal (moderate rain),

intermittent (proportional to

the speed of the vehicle),

automatic, then single
wipe (see following

page).

park,

single wipe (press down and

release),

Windscreen wipers
A. Wiping speed selection stalk:

or

If a signifi cant accumulation of

snow or ice is present, or when
using a tailgate bicycle carrier, de-
activate the automatic rear wiper
via the instrument panel screen

confi guration menu.

V

93

V I S I B I L I T Y

Reverse gear
When reverse gear is engaged, the
rear wiper operates if the windscreen
wipers are operating.

Programming

The function is activated or deac-
tivated via the instrument panel

screen confi guration menu.
This function is activated by default.

Windscreen and headlamp
wash

 Pull the windscreen wiper stalk

towards you. The windscreen
wash then the windscreen wip-

ers operate for a fi xed period.

The headlamp washers only operate
when the dipped beam headlamps
are on
.

Automatic rain sensitive
windscreen wipers

The windscreen wipers operate au-
tomatically, without any action on the
part of the driver, if rain is detected

(sensor behind the rear view mirror),

adapting their speed to the intensity
of the rainfall.

Activation
This is controlled manually by the
driver by moving stalk A to the
"AUTO" position.
It is accompanied by a message on
the instrument panel screen.

Switching off
This is controlled manually by the
driver by moving stalk A upwards
and returning it to position "0" .
It is accompanied by a message on
the instrument panel screen.
The automatic wiping must be reac-
tivated if the ignition has been off for
more than one minute, by pushing
stalk A downwards.

Operating fault
If an automatic wiping malfunction
occurs, the wipers will operate in in-
termittent mode.
Have it checked by a CITROËN
dealer.

Do not cover the rain sensor, linked
with the brightness sensor and
located in the centre of the wind-
screen behind the rear view mirror.
Switch off the automatic wip-
ing when using an automatic car
wash.
In winter, it is advisable to wait until
the windscreen is completely clear
of ice before activating the auto-
matic wiping.

V

94

V I S I B I L I T Y

Special position of the
windscreen wipers

This position permits release of the
windscreen wiper blades.
It is used for cleaning or replacement
of the blades. It can also be useful,
in winter, to detach the blades from
the windscreen.
In the moment following switching
off of the ignition, any action on the
stalk positions the wipers vertically
on the windscreen.

To park the wipers after this has
been done, switch on the ignition
and operate the stalk.
For maintain the effectiveness of

the "fl at-blade" wiper blades, it is

advisable to:
-

handle them with care,

-

clean them regularly using
soapy water,

-

avoid using them to retain card-
board on the windscreen.

- replace them at the fi rst signs

of wear.

COURTESY LAMPS

1. Front courtesy lamp
2. Map reading lamp s

Front courtesy lamp

Rear courtesy lamp

1. Rear courtesy lamp
2. Map reading lamps

In this position, the courtesy
lamp comes on gradually:

Permanently off.

Permanent lighting.

-

when the vehicle is unlocked,

-

when a door is opened,

-

when the key is removed from
the ignition,

-

when the remote control locking
button is activated, in order to lo-
cate your vehicle.

It switches off gradually:
-

when the vehicle is locked,

-

when the ignition is switched on,

-

30 seconds after the last door is
closed.

V

93

V I S I B I L I T Y

Reverse gear
When reverse gear is engaged, the
rear wiper operates if the windscreen
wipers are operating.

Programming

The function is activated or deac-
tivated via the instrument panel

screen confi guration menu.
This function is activated by default.

Windscreen and headlamp
wash

 Pull the windscreen wiper stalk

towards you. The windscreen
wash then the windscreen wip-

ers operate for a fi xed period.

The headlamp washers only operate
when the dipped beam headlamps
are on
.

Automatic rain sensitive
windscreen wipers

The windscreen wipers operate au-
tomatically, without any action on the
part of the driver, if rain is detected

(sensor behind the rear view mirror),

adapting their speed to the intensity
of the rainfall.

Activation
This is controlled manually by the
driver by moving stalk A to the
"AUTO" position.
It is accompanied by a message on
the instrument panel screen.

Switching off
This is controlled manually by the
driver by moving stalk A upwards
and returning it to position "0" .
It is accompanied by a message on
the instrument panel screen.
The automatic wiping must be reac-
tivated if the ignition has been off for
more than one minute, by pushing
stalk A downwards.

Operating fault
If an automatic wiping malfunction
occurs, the wipers will operate in in-
termittent mode.
Have it checked by a CITROËN
dealer.

Do not cover the rain sensor, linked
with the brightness sensor and
located in the centre of the wind-
screen behind the rear view mirror.
Switch off the automatic wip-
ing when using an automatic car
wash.
In winter, it is advisable to wait until
the windscreen is completely clear
of ice before activating the auto-
matic wiping.

V

94

V I S I B I L I T Y

Special position of the
windscreen wipers

This position permits release of the
windscreen wiper blades.
It is used for cleaning or replacement
of the blades. It can also be useful,
in winter, to detach the blades from
the windscreen.
In the moment following switching
off of the ignition, any action on the
stalk positions the wipers vertically
on the windscreen.

To park the wipers after this has
been done, switch on the ignition
and operate the stalk.
For maintain the effectiveness of

the "fl at-blade" wiper blades, it is

advisable to:
-

handle them with care,

-

clean them regularly using
soapy water,

-

avoid using them to retain card-
board on the windscreen.

- replace them at the fi rst signs

of wear.

COURTESY LAMPS

1. Front courtesy lamp
2. Map reading lamp s

Front courtesy lamp

Rear courtesy lamp

1. Rear courtesy lamp
2. Map reading lamps

In this position, the courtesy
lamp comes on gradually:

Permanently off.

Permanent lighting.

-

when the vehicle is unlocked,

-

when a door is opened,

-

when the key is removed from
the ignition,

-

when the remote control locking
button is activated, in order to lo-
cate your vehicle.

It switches off gradually:
-

when the vehicle is locked,

-

when the ignition is switched on,

-

30 seconds after the last door is
closed.

V

94

V I S I B I L I T Y

Special position of the
windscreen wipers

This position permits release of the
windscreen wiper blades.
It is used for cleaning or replacement
of the blades. It can also be useful,
in winter, to detach the blades from
the windscreen.
In the moment following switching
off of the ignition, any action on the
stalk positions the wipers vertically
on the windscreen.

To park the wipers after this has
been done, switch on the ignition
and operate the stalk.
For maintain the effectiveness of

the "fl at-blade" wiper blades, it is

advisable to:
-

handle them with care,

-

clean them regularly using
soapy water,

-

avoid using them to retain card-
board on the windscreen.

- replace them at the fi rst signs

of wear.

COURTESY LAMPS

1. Front courtesy lamp
2. Map reading lamp s

Front courtesy lamp

Rear courtesy lamp

1. Rear courtesy lamp
2. Map reading lamps

In this position, the courtesy
lamp comes on gradually:

Permanently off.

Permanent lighting.

-

when the vehicle is unlocked,

-

when a door is opened,

-

when the key is removed from
the ignition,

-

when the remote control locking
button is activated, in order to lo-
cate your vehicle.

It switches off gradually:
-

when the vehicle is locked,

-

when the ignition is switched on,

-

30 seconds after the last door is
closed.

V

95

V I S I B I L I T Y

In permanent lighting mode, differ-
ent lighting times are available:
-

with the ignition off, approxi-
mately ten minutes,

-

in energy economy mode, ap-
proximately thirty seconds,

-

with the engine running, unlimited.

Map reading lamps

 With the ignition on, press the

corresponding switch.

Panoramic sunroof rear
reading lamps (Tourer)

With the key in position or with the
ignition on:
 Press the corresponding switch.
The reading lamp concerned comes
on for ten minutes.

The rear reading lamps come on:
-

when the key is removed from
the ignition,

-

when the vehicle is unlocked.

They switch off gradually:
-

when the vehicle is locked,

-

when the ignition is switched on.

V

96

V I S I B I L I T Y

INTERIOR MOOD LIGHTING

Your vehicle is equipped with interior
mood lighting for the centre console
and the door handles.

Central console

The lamps are located on the roof
console, near the front interior lamp.
They light up the central console.

Lighting for door opening
controls

Operation
These lamps are activated with the
automatic illumination of headlamps,
when the ambient light is poor. They
are deactivated when the instrument
panel is off.
The intensity of the lighting varies
along with that of the instrument
panel.
 Press buttons A to increase or re-

duce the intensity of the lighting.

They are located on the front and
rear interior door opening controls.
The rear door opening controls light-
ing is deactivated if child safety is
activated.

V

97

V I S I B I L I T Y

Pavement lighting

With the door open, this lights up the
ground next to the vehicle.

Floor lighting

In the front of the vehicle, when a
door is opened, this lights up the in-
terior of the vehicle.

The welcome lighting is made up of:
- The interior (roof) lamps.

- The fl oor lighting.
-

The pavement lighting when a
door is open.

WELCOME LIGHTING

VI

!

98

F I T T I N G S

SUN VISOR

SKI FLAP

A fl ap in the backrest, located to the

rear of the armrest, facilitates the

carrying of long objects.

With the ignition on, lift the fl ap;

the mirror is illuminated automat-

ically.

To prevent dazzle from ahead, fold

the visor downwards.

It can be disengaged from its central

fi xing and pivoted over to the side

windows if required.

COOLED GLOVE BOX

To open the glove box, pull on

the handle and lower the lid.

The glove box has a manually clos-

able air conditioning vent B .

It has 2 or 3 sockets C to connect

audio/video equipment, and a slot

for a SIM card (see "Audio and

Telematics" section).

It has automatic illumination.

To open

Lower the rear armrest.

Pull the fl ap handle down.

Lower the fl ap.

Load the objects from inside the

boot.

Ensure that the objects are well se-

cured and that they do not impede

the operation of the gear lever.

Whilst driving, the glove
box should be kept closed.

VI

99

F I T T I N G S

MATS

Removing

Slide the seat back as far as

possible,

unclip the fi xings,

remove the fi xings, then the mat.

Refitting

Position the mat correctly,

clip the fi xings,

check that the mat is held is

place correctly.

To avoid any interference with the

pedals:

- only use mats which are suit-

able for the fi xings already

present in the vehicle. The use

of these fi xings is essential,

- never fi t more than 1 mat.

The use of a mat not approved by

CITROËN may obstruct access to

the pedals and hinder the cruise

control/speed limiter function.

Floor mats approved by CITROËN

are fi tted with a 3rd fi xing located in

the pedal area to avoid any risk of

interference with the pedals.

FRONT ARMREST

Comfort and storage system for the

driver and front passenger.

Adjustment

To optimise your driving position:

lift the control A ,

push the armrest forwards.

The armrest returns to its initial posi-

tion when you push it rearwards.

The front armrest includes a cup

holder and a USB port.

The USB port allows connection of

a portable device, such as a USB

memory stick, sending the audio

fi les to your audio system so that

they can be heard via the vehicle's

speakers.

Lift the armrest to access the cup

holder or the USB port.

Equipment available for the driver

and front passenger.

Cup-holder/USB port

VI

100

F I T T I N G S

REAR ARMREST

Comfort and storage system for the

rear passengers.

Cup-holder

The rear cup-holder A is located in

the rear central armrest.

Lower the rear armrest.

Pull forwards to extract the cup-

holder.

Storage

Lift up the upper part of the rear

central armrest to access stor-

age space B .

12 V ACCESSORIES SOCKET

SIDE BLINDS

Pull on the tab A and position the

blind on the hook B .

REAR BLIND (SALOON)

pull on the tab C to unreel the

blind,

position the blind on the hooks D .

This is located in the rear ashtray.

Max power: 100 W.

Driver's oddments tray

Pull the handle towards you.

Была ли эта страница вам полезна?
Да!Нет
4 посетителя считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности